This is a good article. Click here for more information.

1952 Atlantic hurricane season

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
1952 Atlantic hurricane season
First system formed February 3, 1952
Last system dissipated November 30, 1952
Strongest storm1 Fox – 934 mbar (hPa) (27.58 inHg), 145 mph (230 km/h)
Total depressions 11
Total storms 11
Hurricanes 5
Major hurricanes (Cat. 3+) 2
Total fatalities 47
Total damage $13.75 million (1952 USD)
1Strongest storm is determined by lowest pressure
Atlantic hurricane seasons
1950, 1951, 1952, 1953, 1954

The 1952 Atlantic hurricane season was a near normal Atlantic hurricane season, although it was the least active since 1946.[1] The season officially started on June 15;[2] however, a pre-season unnamed storm formed on Groundhog Day, becoming the only storm on record in the month of February. The other six tropical cyclones were named using the Joint Army/Navy Phonetic Alphabet, the first of which formed on August 18. The final storm of the season dissipated on October 28, two and a half weeks before the season officially ended on November 15.[3]

Four of the tropical cyclones made landfall during the season, the first being the February tropical storm that crossed southern Florida. The first hurricane, named Able, struck South Carolina with winds of 100 mph (160 km/h), causing heavy damage near the coast and widespread power outages. It moved up most of the East Coast of the United States, leaving 3 deaths and widespread damage. As a developing tropical cyclone, Hurricane Charlie caused damaging flooding and landslides in southwest Puerto Rico. The final and strongest of the season, Hurricane Fox, struck Cuba with winds of 145 mph (233 km/h); it killed 40 people and left heavy damage, particularly to the sugar crop, reaching $10 million (1952 USD, $89.1 million 2024 USD).

Storms

Tropical Storm One

Tropical storm (SSHWS)
150px 150px
Duration February 3 – February 4
Peak intensity 70 mph (110 km/h) (1-min) ≤ 990 mbar (hPa)

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

On February 2, a non-frontal low formed in the western Caribbean Sea two months after the end of the hurricane season. It moved quickly north-northwestward and acquired gale-force winds as it brushed the northern coast of Cuba. Early on February 3, the storm struck Cape Sable, Florida and quickly crossed the state.[4] The Miami National Weather Service office recorded a wind gust of 68 mph (110 km/h) during its passage.[5] The winds damaged windows and power lines,[6] catching residents and tourists off-guard.[7] The cyclone also dropped 2–4 inches (50–100 mm) of precipitation along its path, causing crop damage in Miami-Dade County.[5]

After leaving Florida, the storm continued rapidly northeastward and transitioned into a tropical storm during the afternoon of February 3. While off the coast of the Southeastern United States, it attained peak winds of 70 mph (110 km/h). On February 4 it evolved into an extratropical cyclone off the coast of North Carolina. Later that day, it passed over Cape Cod, and early on February 5 dissipated after crossing into Maine.[4] The storm caused scattered power outages and gusty winds across New England.[8] The cyclone remains the only tropical or subtropical storm on record during the month of February.[4]

Hurricane Able

Category 2 hurricane (SSHWS)
150px
Duration August 18 – September 3
Peak intensity 100 mph (155 km/h) (1-min)  980 mbar (hPa)

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Over six months after the previous storm dissipated, a tropical depression developed just off the west coast of Africa on August 18. It moved generally west- to west-northwestward for much of its duration, intensifying into a tropical storm on August 24 east of the Lesser Antilles.[4] The next day, Hurricane Hunters confirmed the presence of Tropical Storm Able. Passing north of the islands, the storm attained hurricane status on August 27. On August 30, Able turned to the north-northwest due to an approaching cold front, and the next day made landfall near Beaufort, South Carolina as a Category 2 hurricane with peak winds of 100 mph (160 km/h).[1][4] The town was heavily damaged,[9] and was briefly isolated after winds downed power and telephone lines.[10] Across South Carolina, the hurricane caused two indirect deaths, as well as moderate damage totaling $2.2 million (1952 USD, $19.6 million 2024 USD).[1]

As Able turned north and northeastward over land, the winds quickly weakened to tropical storm force, although it retained gale force winds through North Carolina, Virginia, and Maryland; this was due to remaining over the flat terrain east of the Appalachian Mountains, as well as retaining a plume of tropical moisture from its south. It left light damage in North Carolina, some of it due to a tornado.[1] In Maryland, heavy rainfall caused widespread flooding, which washed out the tracks of the Baltimore and Ohio Railroad near Baltimore. In Ellicott City, Maryland, the rains flooded several houses, forcing families to evacuate.[11] Two tornadoes were also reported in the region, and damage in the Washington, D.C. area reached $500,000 (1952 USD, $4.46 million 2024 USD). Further northeast, the storm continued to produce heavy rainfall, causing flooding, as well as one indirect death in Pennsylvania. After moving through New England, Able dissipated on September 2 near Portland, Maine.[1]

Tropical Storm Three

Tropical storm (SSHWS)
150px
Duration August 27 – August 28
Peak intensity 50 mph (85 km/h) (1-min)  1000 mbar (hPa)

Hurricane Baker

Category 2 hurricane (SSHWS)
150px
Duration August 31 – September 8
Peak intensity 110 mph (175 km/h) (1-min)  969 mbar (hPa)

The third tropical cyclone of the season developed on August 31 a short distance east of the northern Lesser Antilles.[4] Its presence was reported by a ship the next day that encountered rough seas and gale force winds. As a result, the Weather Bureau sent the Hurricane Hunters to investigate the system, which reported a strengthening hurricane moving northwestward.[1] Given the name Baker, the hurricane passed north of the Lesser Antilles, reaching peak winds of 110 mph (175 km/h) late on September 3.[4] For several days, the Hurricane Hunters reported similar winds, along with gusts up to 140 mph (230 km/h).[1]

With a large anticyclone located over the Ohio Valley, Baker turned to the northeast on September 5,[12] passing about halfway between Bermuda and North Carolina. The hurricane slowly weakened as it moved through the north Atlantic Ocean, just missing Newfoundland while maintaining winds of 80 mph (130 km/h).[4] Wind gusts on Avalon Peninsula reached 70 mph (110 km/h), and heavy fishing damage was reported in Lower Island Cove.[13] After affecting the island, Baker transitioned into an extratropical storm, which lasted another day before dissipating south of Greenland.[4]

Tropical Storm Five

Tropical storm (SSHWS)
150px
Duration September 8 – September 11
Peak intensity 50 mph (85 km/h) (1-min) ≤ 999 mbar (hPa)

Hurricane Charlie

Category 3 hurricane (SSHWS)
150px 150px
Duration September 24 – September 28
Peak intensity 120 mph (195 km/h) (1-min) ≤ 958 mbar (hPa)

On September 22, a tropical wave moved into the eastern Caribbean Sea,[1] spawning a tropical depression near Hispaniola early on September 24.[4] As it tracked west-northwestward, the low dropped heavy rainfall, peaking at 4.42 in (112 mm) in Christiansted, United States Virgin Islands, as well as 11.9 in (300 mm) in Garzas, Puerto Rico.[14] In Puerto Rico, the rains caused and landslides that affected seven towns, notably Ponce, the island's second-largest city.[15] There, at least 14 buildings were destroyed.[16] The floods left more than 1,000 people homeless, 300 of whom took refuge in a Red Cross shelter.[15] Overall, the flooding on the island killed four people and left moderate damage of around $1 million (1952 USD, $8.91 million 2024 USD).[1]

After affecting Puerto Rico, the low continued to organize, and subsequently struck the Dominican Republic on September 23. The circulation became disrupted while crossing Hispaniola, although it reorganized near the Turks and Caicos Islands and became Tropical Storm Charlie before reaching those islands.[1] On September 25, Charlie attained hurricane status,[4], and due to its continued northwest motion, the Weather Bureau advised small craft to remain at port in the southeastern United States coast.[17] However, the hurricane turned to the north and northeast on September 26, during which the Hurricane Hunters recorded peak winds of 120 mph (195 km/h).[4] It briefly threatened Bermuda, prompting the United States Air Force to evacuate its fleet of airplanes from Kindley Air Force Base.[18] Charlie ultimately northwest of Bermuda, and later began weakening. On September 29 it turned eastward, and later that day transitioned into an extratropical cyclone. The remnants lasted two more days before dissipating 400 mi (640 km) southeast of Newfoundland.[1]

Tropical Storm Dog

Tropical storm (SSHWS)
150px
Duration September 24 – September 30
Peak intensity 70 mph (110 km/h) (1-min)  998 mbar (hPa)

On September 25, a tropical wave spawned a tropical storm about 700 mi (1,100 km) east of the Lesser Antilles. Given the name Dog, the storm moved northwestward for its entire duration. On September 26, Hurricane Hunters observed winds of 78 mph (126 km/h), which indicated that Dog strengthened to just below hurricane intensity. The plane also estimated winds of around 100 mph (160 km/h), although they were unable to located a closed center of circulation.[1] After approaching hurricane status,[4], Dog began a marked weakening trend, with winds of only 50 mph (85 km/h) by September 27. Continuing to weaken, the storm dissipated on September 29.[1] The Weather Bureau advised ships to avoid the storm, but overall Dog did not affect land.[18] As the Hurricane Hunters did not reported a well-defined circulation, there was a possibility Dog was not a tropical cyclone; the report of the 1952 season assessed that Dog remained a tropical wave.

Tropical Storm Eight

Tropical storm (SSHWS)
150px
Duration September 25 – September 30
Peak intensity 45 mph (75 km/h) (1-min) ≤ 1000 mbar (hPa)

Hurricane Easy

Category 2 hurricane (SSHWS)
150px
Duration October 6 – October 11
Peak intensity 105 mph (165 km/h) (1-min)  968 mbar (hPa)

On October 6, a tropical depression formed about 700 mi (1,100 km) east of Antigua, near where the previous hurricane developed. The depression proceeded northward, and was detected by the Hurricane Hunters on October 7. The next day, a plane flew into Easy and reported peak winds of 110 mph (180 km/h), indicating the storm had rapidly intensified. By the time it reached peak intensity, the hurricane had turned sharply to the east, and later began to move toward the south. As quickly as it strengthened, Easy began to weaken, and an aircraft reported winds of only 48 mph (77 km/h) on October 9. The storm headed southwest, ultimately dissipating on October 11 about 155 mi (249 km) southwest of where it formed. Easy never affected land.[4][1]

Hurricane Fox

Category 4 hurricane (SSHWS)
150px 150px
Duration October 20 – October 27
Peak intensity 145 mph (230 km/h) (1-min)  934 mbar (hPa)

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

The strongest tropical cyclone of the season formed on October 20 in the Caribbean Sea off the northwest coast of Colombia,[4] believed to have been from the Intertropical Convergence Zone.[1] It moved northwestward, intensifying into a tropical storm on October 21 and a hurricane the following day. Fox subsequently turned to the north, intensifying to a major hurricane as it passed west of the Cayman Islands. Late on October 24, the cyclone struck the small island of Cayo Guano del Estes in the Archipelago de los Canarreos, south of Cienfuegos, Cuba. It struck the island with peak winds of 145 mph (233 km/h), and the island reported a minimum pressure of 934 mbar (27.59 inHg). Shortly thereafter, Fox crossed the mainland coast of Cuba west of Cienfuegos, and it weakened while crossing the island.[4][1]

Hurricane Fox crossed Cuba in a rural area dominated by sugar plantations, with heavy damage reported to 36 mills. In one town, the hurricane destroyed about 600 homes and damaged over 1,000 more.[1] Across the island, the strongest winds downed large trees and washed a large freighter ashore.[19] Heavy rainfall affected all but the extreme eastern and western end of the island, with a peak of 6.84 in (174 mm) near Havana.[20] The rains flooded low-lying areas and caused rivers to exceed their banks.[19] Throughout Cuba, Hurricane Fox injured 70 people,[19] killed 40, and heavy damage totaling $10 million (1952 USD, $89.1 million 2024 USD). Fox was among the strongest hurricanes to strike the country.[21]

After crossing Cuba, Fox emerged into the Atlantic Ocean with winds of 100 mph (160 km/h), crossing central Andros and turning eastward though the Bahamas.[4] On New Providence, the hurricane dropped 13.27 in (337 mm) of rainfall,[20] Strong winds caused severe crop damage, leaving 30% of the tomato crop destroyed.[1] After briefly restrengthening to a major hurricane, Fox began a steady weakening trend. It turned abruptly to the north-northwest, followed by another turn to the northeast. On October 28, Fox was absorbed by a cold front west-southwest of Bermuda.[4][1]

Tropical Storm Eleven

Tropical storm (SSHWS)
150px
Duration November 26 – November 30
Peak intensity 60 mph (95 km/h) (1-min) ≤ 992 mbar (hPa)

Storm names

These names were used to name storms during the 1952 season, the third and final time storm names were taken from the Joint Army/Navy Phonetic Alphabet. Names that were not used to designate tropical cyclones are marked in gray.[22]

  • Able
  • Baker
  • Charlie
  • Dog
  • Easy
  • Fox
  • George (unused)
  • How (unused)
  • Item (unused)
  • Jig (unused)
  • King (unused)
  • Love (unused)
  • Mike (unused)
  • Nan (unused)
  • Oboe (unused)
  • Peter (unused)
  • Queen (unused)
  • Roger (unused)
  • Sugar (unused)
  • Tare (unused)
  • Uncle (unused)
  • Victor (unused)
  • William (unused)
  • Xray (unused)
  • Yoke (unused)
  • Zebra (unused)

See also

References

  1. 1.00 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08 1.09 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. 4.00 4.01 4.02 4.03 4.04 4.05 4.06 4.07 4.08 4.09 4.10 4.11 4.12 4.13 4.14 4.15 4.16 4.17 Lua error in package.lua at line 80: module 'strict' not found.
  5. 5.0 5.1 Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. Lua error in package.lua at line 80: module 'strict' not found.
  12. Lua error in package.lua at line 80: module 'strict' not found.
  13. Lua error in package.lua at line 80: module 'strict' not found.
  14. Lua error in package.lua at line 80: module 'strict' not found.
  15. 15.0 15.1 Lua error in package.lua at line 80: module 'strict' not found.
  16. Lua error in package.lua at line 80: module 'strict' not found.
  17. Lua error in package.lua at line 80: module 'strict' not found.
  18. 18.0 18.1 Lua error in package.lua at line 80: module 'strict' not found.
  19. 19.0 19.1 19.2 Lua error in package.lua at line 80: module 'strict' not found.
  20. 20.0 20.1 Lua error in package.lua at line 80: module 'strict' not found.
  21. Lua error in package.lua at line 80: module 'strict' not found.
  22. Lua error in package.lua at line 80: module 'strict' not found.

External links