Bradfield Highway (Sydney)

From Infogalactic: the planetary knowledge core
(Redirected from Bradfield Highway, Sydney)
Jump to: navigation, search
Bradfield Highway
New South Wales
Cahill expressway from bridge.jpg
Bradfield Highway, south-westerly aspect
General information
Type Highway
Length 2.4 km (1.5 mi)
Opened 1932
Former
route number
<templatestyles src="Plainlist/styles.css"/>
  • National Route 1 (1955–1992)[1]
  • No Shield (1992–1993)
  • Metroad 2 (1993–2006)[2]
  • Entire Route
Major junctions
North end <templatestyles src="Plainlist/styles.css"/>
South end <templatestyles src="Plainlist/styles.css"/>
Highway system
Highways in Australia
National HighwayFreeways in Australia
Highways in New South Wales

The Bradfield Highway is a highway in Sydney, New South Wales, Australia. At 2.4 kilometres (1.5 mi) long it is one of the shortest highways in Australia.

The highway was named after Dr John Bradfield, who oversaw the tendering process for the construction of the Sydney Harbour Bridge.

The Bradfield Highway opened in 1932 and begins at the end of the Western Distributor in the Sydney CBD, crosses the Sydney Harbour Bridge and ends at the Warringah Freeway in North Sydney (just North of the Pacific Highway intersection). In 2001, 159,587 vehicles a day used the highway.[3]

The Bradfield Highway carries six lanes of traffic across the eight lane Sydney Harbour Bridge. The other two traffic lanes on the Sydney Harbour Bridge are used for the Cahill Expressway, which run only southbound on the bridge. During peak periods three out of the six lanes are reversed, giving a 2 × 4, 3 × 3 or 5 × 1 flow. The default is 4 × 2. (Four north, two south) The direction of the lanes is indicated by electronic signage above each lane. The lanes are numbered one to six from west to east. Lane six was also reversed prior to 1990 during the evening rush hour, giving a 6 × 0 flow, but this no longer occurs because of changes made to the Warringah Freeway to accommodate the Sydney Harbour Tunnel.

In August 1992, the Sydney Harbour Tunnel opened, which helped to relieve congestion on the Bradfield Highway.[4]

Exits and Interchanges

Lua error in package.lua at line 80: module 'strict' not found.

LGA Location km mi Destinations Notes
North Sydney North Sydney 0 0 x20px Warringah Freeway (M1) – North Sydney, Newcastle, Brisbane
Sydney Harbour 1 0.6 Sydney Harbour Bridge
Sydney Sydney CBD 2.4 1.5 x20px Western Distributor (A4) south / Cahill Expressway east – Ashfield, Parramatta Bradfield Highway continues as Western Distributor; Cahill Expressway westbound merges to Bradfield Highway northbound; no connection to Cahill Expressway eastbound
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

See also

Australian Roads portal

References

Script error: No such module "Attached KML".

  1. Sydney Harbour Crossings, Ozroads, Retrieved on 3 June 2013.[self-published source]
  2. Former Alignment of Metroad 2, Ozroads, Retrieved on 3 June 2013.[self-published source]
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.

<templatestyles src="Asbox/styles.css"></templatestyles>