File:PlasticsInjectionMoulder-die.jpg
From Infogalactic: the planetary knowledge core
Size of this preview: 800 × 575 pixels. Other resolutions: 320 × 230 pixels | 1,869 × 1,344 pixels.
Original file (1,869 × 1,344 pixels, file size: 297 KB, MIME type: image/jpeg)
Summary
Photo shows one half of a die producing a decorative paperclip (approx 50mm x 100mm), mounted to the movable platen in the workarea of an injection moulder. The injector nozzle is shown retracted at the right side of the photo. The limit switch to control the closing position of the hydraulics (that opens and closes the die ) is visible in the foreground, mounted on the fixed platen.
Licensing
Lua error in package.lua at line 80: module 'strict' not found.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 20:05, 12 January 2017 | | 1,869 × 1,344 (297 KB) | 127.0.0.1 (talk) | <p>Photo shows one half of a die producing a decorative paperclip (approx 50mm x 100mm), mounted to the movable platen in the workarea of an injection moulder. The injector nozzle is shown retracted at the right side of the photo. The limit switch to control the closing position of the hydraulics (that opens and closes the die ) is visible in the foreground, mounted on the fixed platen. </p> |
- You cannot overwrite this file.
File usage
The following 2 pages link to this file:
