Nemi ships

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
The remains of the hull of one of the two ships recovered from Lake Nemi. Workers in the foreground give an indication of scale.
Reconstruction of the Nemi Ship A

The Nemi Ships were two ships, one ship larger than the other, built by the Roman emperor Caligula in the 1st century AD at Lake Nemi. Although the purpose of the ships is only speculated upon, the larger ship was essentially an elaborate floating palace, which contained quantities of marble, mosaic floors, heating and plumbing and amenities such as baths. Both ships featured technology thought to have been developed historically much later. It has been stated that the emperor was influenced by the lavish lifestyles of the Hellenistic rulers of Syracuse and Ptolemaic Egypt. Recovered from the lake bed in 1929, the ships were destroyed by artillery fire during World War II in 1944 though the History Channel attributes their destruction to German soldiers.

Location

View of Lake Nemi from the Sacred Way

Lake Nemi (Italian: Lago di Nemi , Latin: Nemorensis Lacus) is a small circular volcanic lake in the Lazio region of Italy, 30 km (19 mi) south of Rome. It has a surface of 1.67 km2 (0.64 sq mi) and a maximum depth of 33 meters (108 ft).

There is considerable speculation regarding why the emperor Caligula chose to build two large ships on such a small lake. From the size of the ships it was long held that they were pleasure barges, though, as the lake was sacred, no ship could sail on it under Roman law (Pliny the Younger, Litterae VIII-20) implying a religious exemption.[1]

Caligula particularly favoured the Egyptian Isis cult which he had established in Rome and also supported that of Diana Nemorensis whom, in the Roman tradition of syncretism, he likely viewed as an aspect of Isis.

Situated on opposite sides of the lake and atop the crater walls are the towns of Genzano and Nemi. Genzano was dedicated by the Romans to the goddess Cynthia, a cult associated with that of Diana Nemorensis. Nemi did not exist in Roman times. The name Nemi derives from the Latin nemus Aricinum (grove of Ariccia), Ariccia being an important nearby town associated with the worship of Diana and the god Virbius.[note 1] Located at Nemi are the ruins of an ancient temple dedicated to Diana, which was connected by the Via Virbia to the Via Appia (the Roman road between Rome and Brindisi).[2]

During the time of the Roman Empire, the area around Genzano was used by wealthy Roman citizens for its clean air, uncontaminated water and cooler temperatures during the hot summer months. The lake has its own microclimate and is protected from wind by the crater walls. Johann Wolfgang von Goethe, Lord Byron and Charles Gounod all lived in Nemi and saw the magical reflection of the Moon seen in the center of the lake during summer. This phenomenon is the source of the Roman name for the lake, Speculum Dianae (Diana's Mirror).[2]

Recovery

Local fishermen had always been aware of the existence of the wrecks, and had explored them and removed small artifacts, often using grappling hooks to pull up pieces, which they sold to tourists. In 1446, Cardinal Prospero Colonna and Leon Battista Alberti followed up on the stories regarding the remains and discovered them lying at a depth of 18.3 meters (60 ft), which at that time was too deep for effective salvage. They caused significant damage to the ships by using ropes with hooks to tear planks from them. Alberti learned little more than the type of wood and that it was covered in lead sheathing. In 1535, Francesco De Marchi dove on the wreck using a diving bell. His finds included bricks, marble paving stones, bronze, copper, lead artefacts and a great number of timber beams. He had all of the wood made into items such as walking sticks and boxes. De Marchi apparently sold everything he collected to the nobility and foreign visitors who visited the site to watch his work. From material recovered he added the knowledge that mortise and tenon joints had been used in their construction. Despite the successful salvage of entire structures and parts, there was no academic interest in the ships, so no further research was performed. The objects recovered were lost and their fate remains unknown.[2]

By 1827, interest had revived and it had become a widespread belief that earlier material recovered had either been part of a temple to Diana or was from the villa of Julius Caesar cited by Suetonius. Annesio Fusconi built a floating platform from which to raise the wrecks. However, several of his cables broke, so he called a halt until he could find stronger cables. When he returned, he found that the locals had dismantled his platform to make wine barrels. This led him to abandon the project.[2]

In 1895, with the support of the Ministry of Education, Eliseo Borghi began a systematic study of the wreck site and discovered that the site contained two wrecks instead of the one expected. Among the material Borghi recovered was the bronze tiller head of one of the rudders and many bronze heads of wild animals. Borghi placed all of his finds in his own museum and offered to sell the collection to the Government. The timbers he recovered were discarded and lost while no contextual referencing was documented for any of his finds. Felice Barnabei, director general of the Dept of Antiquity and Fine Art claimed all of the artefacts for the National Museum and submitted a report requesting the recovery cease due to the "devastation of the two wrecks". An engineer from the Regia Marina (the Italian Royal Navy) surveyed the site to determine the feasibility of recovering the two ships intact. The engineer concluded that the only viable way was to partially drain the lake.[2]

In 1927, the Italian dictator Benito Mussolini ordered Guido Ucelli to drain the lake and recover the ships. With the help of the Regia Marina, the Italian Army, industry, and private individuals, an ancient Roman underground water conduit linking the lake to farms outside the crater was reactivated. After connecting the conduit to a floating pumping platform, on 20 October 1928, the lake level began dropping. By 28 March 1929, the water level had dropped 5 meters (16 ft), and the first ship (prima nave) broke the surface. By 10 June 1931, the prima nave had been recovered and the second ship (seconda nave) was exposed. By this time the water level had dropped more than 20 meters (66 ft) with over 40 million cubic meters of water removed. As a result of the weight reduction, on 21 August 1931, 500,000 cubic meters of mud erupted from the underlying strata causing 30 hectares (74 acres) of the lake floor to subside. Work ceased and, while the risks of continuing the project were debated, the lake began refilling. As the seconda nave had already partially dried out, the submersion caused considerable damage. On 10 November 1931, the Minister of Public Works ordered the project and all research abandoned.[2]

On 19 February 1932, the Navy Ministry, which had been a partner in the recovery, petitioned the Prime Minister Mussolini to resume the project. Joining with the Ministry of Education they received permission to take over responsibility and pumping to drain the lake recommenced on 28 March. Around this time a small boat was found, about 10 meters (33 ft) long. The boat had a pointed bow and a square stern. It had been loaded with stones in order to sink it. It is believed to be contemporaneous with the ships. Due to technical problems, the seconda nave could not be recovered until October 1932. A purpose built museum constructed over both ships was inaugurated in January 1936.[2]

Construction

Stern-mounted rudder of a Roman boat, 1st century AD (RG-Museum, Cologne)
File:Testate di bagli in bronzo da nemi, epoca di caligola, 37-41 dc..JPG
Brass rings recovered in 1895. These were fitted to the ends of cantilevered beams that supported each rowing position on the seconda nave.

Both vessels were constructed using the Vitruvian method, a shell first building technique used by the Romans.[1]

  • Step 1: construction of the profile.
  • Step 2: construction of the keel and the flat bottom up to the second order of cincti, in two phases.
  • Step 3: construction of the shell up to the third wale (topgallant bulwarks).
  • Step 4: Insertion of the ribs, first those with trabes (crossbeam bracing) and then those without.

The hull had been sheathed in three layers of lead sheeting to protect the timbers from shipworms; as there are none in fresh water lakes, this design feature was not only costly but useless. It is evidence that the ships hulls were constructed following standardized Roman shipbuilding techniques rather than being purpose-built. The topside timbers were protected by paint and tarred wool with many surfaces decorated with marble, mosaics and gilded copper roof tiles. There was a lack of coordination between the structure of the hull and that of the superstructures, which suggests that naval architects designed the hulls, while civil architects then designed the superstructure to use the space available after the hulls were completed.[1] After their recovery, the ships hulls were found to be completely empty and unadorned.

They were steered using 11.3 meters (37 ft) long quarter oars, with the seconda nave equipped with four, two off each quarter and two from the shoulders while the prima nave was equipped with two. Similar pairs of steering leeboards appear frequently in early 2nd century depictions of ships.[3]

The seconda nave was almost certainly powered by oars, as structural supports for the rowing positions protrude along the sides of the hull. The prima nave had no visible means of propulsion so was likely towed to the center of the lake when in use.[2]

A lead pipe found on one of the wrecks had Property of Gaius Caesar Augustus Germanicus stamped on it while many tiles had dates of manufacture. Together it leaves little doubt as to when the ships were built or for whom.[3]

Seutonius describes two ships built by Caligula; "...ten banks of oars...the poops of which blazed with jewels...they were filled with ample baths, galleries, and saloons, and supplied with a great variety of vines and fruit trees." It is reasonable to speculate that the Nemi ships were equipped to a comparable standard. One year after being launched, the ships were stripped of precious objects, ballasted, and then intentionally sunk. The sinking followed the assassination of Caligula (24 January 41).[2]

Prima nave

The first ship recovered was 70 meters (230 ft) long with a beam (width) of 20 meters (66 ft).

The hull was divided into three "active" or main sections. The general shape of the hull appears wider at the stern and narrower at the bow; in fact, the main section is not amidships but is displaced towards the stern. The superstructures appear to have been made of two main blocks of two buildings each, connected by stairs and corridors, built on raised parts of the deck at either end. This distribution gives the ship a discontinuous look and has no similarity to any other ancient construction.[1]

Seconda nave

The second ship recovered was the larger at 73 meters (240 ft) in length and with a beam of 24 meters (79 ft).

The superstructure appears to have been made with a main section amidships, a heavy building at the stern and a smaller one at the prow. Although nothing remains of the stern and prow buildings their existence is indicated by the shorter spacing of the decks supporting cross beams and distribution of ballast.[1] The arrangement of the seconda nave superstructures is comparable to that of the shrines depicted on an Isian lamp held by the Museum of Ostia. If not coincidental, this is further evidence of Isis worship rather than Diana.[1]

Technology

File:Nemi 060 museo delle Navi.jpg
Wooden Nemi anchor with iron tipped flukes and lead stock

The discovery proved that the Romans were capable of building large ships. Before the recovery of the Nemi ships, scholars often ridiculed the idea that the Romans were capable of building a ship as big as some ancient sources reported the Roman grain carriers were.[4]

For centuries large numbers of lead bars have been found on the Mediterranean seabed, and there was debate over whether they were anchor stocks or not. It was argued by some that iron tipped wooden anchors secured by ropes were not heavy enough to be effective so they had to have metal stocks and there was considerable academic controversy over the issue. The Nemi ships, constructed during the transition period when iron anchors were replacing wooden ones, were the first Roman wrecks found to have intact anchors, and confirmed that the lead bars were indeed anchor stocks.[5] Two types of anchor were found, one of oak with iron-tipped flukes and a stock of lead while the other was of iron with a folding timber stock that closely matched the design of the Admiralty pattern anchor re-invented in 1841. In the 1960s, a similar anchor was found in Pompeii and in 1974 another was found buried near Aberdarewllyn in Gwynedd, Wales. These further discoveries confirmed that these technologically advanced anchors were a standard Roman design.[5]

Both ships had several hand-operated bilge pumps that worked like a modern bucket dredge, the oldest example of this type of bilge pump ever found. The pumps were also operated by what may have been the oldest crank handles yet discovered;[6] the reconstruction of the cranked pump which was assembled from fragments, including a wooden disk and an eccentric peg, has been dismissed as "archaeological fantasy".[7]

Piston pumps (ctesibica machina: Vitruvius X.4?7) supplied the two ships with hot and cold running water via lead pipes. The hot water supplied baths while the cold operated fountains and supplied drinking water. This plumbing technology was later lost and only re-discovered in the Middle Ages.

Each ship contained a rotating statue platform. One platform was mounted on caged bronze balls and is the earliest example of the thrust ball bearing previously believed to have been first envisioned by Leonardo da Vinci but only developed much later. Previous Roman ball bearing finds (used for water wheel axles in thermal baths) had a lenticular shape. The second platform was almost identical in design but used cylindrical bearings. Although consensus is that the platforms were meant for displaying statues, it has also been suggested that they may have been platforms for deck cranes used to load supplies.[8]

Destruction

The ships were destroyed by fire in World War II on the night of May 31, 1944.[9] Several shells of the United States Army hit the Museum around 8 pm, causing little damage but forcing the German artillery to leave the area. Around two hours later, smoke was seen coming from the Museum. There are conflicting views on which side was responsible for the destruction:

At that time, Allied forces were pursuing the retreating German army northward through the Alban Hills toward Rome. On May 28, a German artillery post was established within 400 feet (120 m) of the museum … An official report filed in Rome later that year described the tragedy as a willful act on the part of the German soldiers. A German editorial blamed the destruction on American artillery fire. The true story of what happened that night will probably never be known.[9]

Only the bronzes, a few charred timbers, and some material stored in Rome survived the fire. Due to the destruction, research effectively stopped until the 1980s. The museum was restored and reopened in 1953. One-fifth scale models of the ships were built in the Naples naval dockyard and these along with the remaining artifacts are housed there.

Project Diana

Photographs, the drawings made for the Italian Navy survey, and those made by the archaeologist G. Gatti survived, allowing reconstructions to be made of the two ships.

In 1995, the Association Dianae Lacus (Lake of Diana Association) was founded to preserve the cultural and history of the Nemi Lake area. The Association initiated Project Diana, which involved constructing a full-size replica of the Roman prima nave (first ship) of Lake Nemi. Since no record is known to exist of the shape and size of the buildings and temples built on the deck, the replica was to be constructed to deck level only and when completed would be moored on the lake in front of the museum.

On 18 July 1998, the town council of Nemi voted to fund the construction of the forward section and work commenced in the Torre del Greco shipyards. This section was completed in 2001 with the section transported to the Nemi museum where the rest of the vessel was to be constructed. The estimated final cost of the reconstruction was 7.2 million Euros (US$10.7 million).[2]

On 15 November 2003, Assimpresa, the second largest confederation of employers and businesses in Italy, announced it would sponsor the project by supplying all the timber required. No press releases have been made since 2004. The Dianae Lacus web site was deleted on 1 October 2011.

See also

Notes

  1. Virbius is the Latin name for Hyppolytus, a young man whom Diana loved.

References

  1. 1.0 1.1 1.2 1.3 1.4 1.5 Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 Lua error in package.lua at line 80: module 'strict' not found.
  3. 3.0 3.1 Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. 5.0 5.1 Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. White, Jr. 1962, pp. 105f.; Oleson 1984, pp. 230f.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. 9.0 9.1 Deborah N. Carlson, "Caligula's Floating Palaces." Archaeology. May/June 2002, Vol. 55, Issue 3, p. 26

Sources

  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.

External links

Lua error in package.lua at line 80: module 'strict' not found.