New York State Route 878

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

"Interstate 878" redirects here. For the I-878 designated from 1959 to 1970, see Interstate 878 (1959).

Interstate 878 markerNYS Route 878 marker

Interstate 878 and NYS Route 878
Nassau Expressway
290x172px
Map of western Long Island with NY 878 highlighted in red
Route information
Maintained by NYSDOT and NYCDOT
Length: 5.69 mi[3] (9.16 km)
History: Designated I-878 on January 1, 1970;[1] mostly redesignated NY 878 by 1991[2]
Northern segment
Length: 3.73 mi[3] (6.00 km)
West end: NY 27 / Belt Parkway and Conduit Avenue in Queens
Major
junctions:		 I-678 in Queens
East end: Farmers / Rockaway Boulevards in Queens
Southern segment
Length: 1.96 mi[3] (3.15 km)
North end: Burnside Avenue / Rockaway Boulevard in Inwood
South end: Atlantic Beach Bridge / Seagirt Boulevard in Lawrence
Location
Counties: Queens, Nassau
Highway system
← x20px NY 840 I-878 I-890 →

New York State Route 878 (NY 878) is a state highway in the U.S. state of New York, forming the Nassau Expressway. The route exists in two sections connected by Rockaway Boulevard and Rockaway Turnpike, maintained in part by New York City, the New York State Department of Transportation (NYSDOT) (as NY 909G), and Nassau County.[4][5] The termini of the combined route are the Belt Parkway and Conduit Avenue (NY 27) in Ozone Park, southern Queens, and the Atlantic Beach Bridge in Lawrence, southwestern Nassau County.

The 0.70 miles (1.13 km) of NY 878 from I-678 east to the JFK Expressway is designated but not signed as Interstate 878 (I-878).

Route description

Northern segment

The 3.73-mile (6.00 km) northwest section in Queens is mostly built to freeway standards and lies along the north edge of John F. Kennedy Airport, just south of the Belt Parkway and Conduit Avenue (NY 27). Officially it stretches from the interchange between the Belt Parkway, Conduit Avenue (NY 27) and Cross Bay Boulevard east to the intersection of Rockaway Boulevard and Farmers Boulevard.[6][7] The eastbound freeway does in fact begin in the median of Conduit Avenue just west of Cross Bay Boulevard – but it carries NY 27 until a point between the IND Rockaway Line underpass and Lefferts Boulevard. The separate NY 878 begins at that split, and carries eastbound one-way traffic only until the junction with I-678 (Van Wyck Expressway). There it becomes two-way, continuing east past the JFK Expressway; the freeway ends at traffic light at North Hangar Road. NY 878 ends soon after at Rockaway Boulevard and Farmers Boulevard, the second traffic signal after North Hangar Road. (The first is Rockaway Boulevard south-eastbound.)

The 0.70 miles (1.13 km) stretch from I-678 (Van Wyck Expressway) east to the JFK Expressway is designated but not signed as I-878 by the Federal Highway Administration,[7][8] making it the shortest three-digit Interstate Route in the Interstate Highway System.[9] This designation is not signed or used internally by the New York State Department of Transportation (NYSDOT); in fact, this section of NY 878 is only signed eastbound, not on the shorter westbound side.[10]

Between the two halves of NY 878, traffic uses Rockaway Boulevard in Queens and Rockaway Turnpike in Nassau County. From the end of NY 878 to near Guy R. Brewer Boulevard, the road is maintained by the New York City Department of Transportation. From there to just short of the city line is NY 909G; the last 0.07 miles (0.11 km) are again city-maintained.[7][11] The part of Rockaway Turnpike that helps connect NY 878 is maintained by Nassau County.[5][12]

Southern segment

The 2.40-mile (3.86 km) southeast section of NY 878 is a surface expressway, with only two bridges – over the Far Rockaway Branch of the Long Island Rail Road and under Seagirt Boulevard at a trumpet interchange.[13] As signed, NY 878 runs from the split with Rockaway Turnpike south to the toll plaza of the Atlantic Beach Bridge.[10][14] However, only the 1.96-mile (3.15 km) piece from Burnside Avenue in Inwood south to the Atlantic Beach Bridge toll plaza in Lawrence is actually considered NY 878 by NYSDOT;[3] the road is county-maintained from Rockaway Turnpike to Burnside Avenue.[2][6][12][13]

History

File:NY 878 Northbound in Nassau County.jpg
Heading north from the Atlantic Beach Bridge on NY 878 in Nassau County

The portion of Rockaway Boulevard and Rockaway Turnpike between NY 27 and the Atlantic Beach Bridge was originally designated as NY 104 in the early 1930s.[15] This designation was removed by 1932.[16]

From 1959 to 1970, the I-878 designation was used for a section of what is now I-278 (Bruckner Expressway) between the Sheridan Expressway (I-895) and the Cross Bronx Expressway (I-95) in the Bronx.[17] I-278 was routed north on the Sheridan, while its present route was taken by I-878.

At that time, the northwest piece of present NY 878 was to be part of I-78, which would have continued from the Holland Tunnel along the Lower Manhattan Expressway, Williamsburg Bridge and Bushwick Expressway to reach the Nassau Expressway at Cross Bay Boulevard.[17] Northeast of Kennedy Airport, I-78 was to turn north onto the Clearview Expressway, using the Throgs Neck Bridge and Cross Bronx Expressway to end at the Bruckner Interchange.[17]

The one-way eastbound section of the Nassau Expressway from Cross Bay Boulevard to the Van Wyck Expressway was built in the late 1960s as part of I-78.[18] I-78 through New York City was canceled in March 1971, but the Nassau Expressway continued to be signed as I-78.[citation needed] However, effective January 1, 1970, the Nassau Expressway and unbuilt Cross Brooklyn Expressway, stretching from I-278 at the Verrazano-Narrows Bridge east to the Atlantic Beach Bridge, was officially designated I-878 by the New York State Department of Transportation.[1] The Nassau Expressway was redesignated as NY 878 by 1991.[2]

Until 2005, the southern terminus of the southern portion of NY 878 was at Meadow Causeway.[19] At the time, the portion of the Nassau Expressway from Meadow Causeway to the Seagirt Boulevard interchange was maintained by Nassau County[2] while the section between the Seagirt Boulevard interchange and the Atlantic Beach Bridge toll barrier was maintained by the New York State Department of Transportation as NY 900V, a 0.25-mile (0.40 km) long reference route.[13] In 2005, NY 878 was extended south to its present terminus at the Atlantic Beach Bridge toll barrier, resulting in an overlap with NY 900V.[20] The NY 900V designation, now redundant to NY 878, was removed by October 2007.[21]

Major intersections

The northern segment of NY 878 is a limited-access highway; the southern segment is a surface road with at-grade intersections. Exit numbers on NY 878's northern segment are only signed eastbound.

County Location mi[3] km Exit Destinations Notes
Queens Ozone Park 0.00 0.00 Belt Parkway west – Verrazano Narrows Bridge Westbound exit and eastbound entrance
NY 27 west (North Conduit Avenue) – Kennedy Airport Westbound exit and eastbound entrance
Lefferts Boulevard – Long-term parking Eastbound exit and entrance
2.22 3.57 1S Van Wyck Expressway south – Kennedy Airport No westbound entrance; westbound exit is combined with NY 27 west
1N I-678 north (Van Wyck Expressway) – Whitestone Bridge No westbound entrance
2.76 4.44 2S JFK Expressway – Kennedy Airport No westbound exit
2N Belt Parkway east / NY 27 east (South Conduit Avenue) Eastbound exit only
East end of freeway section
3 North Hangar Road / North Boundary Road – Kennedy Airport Intersection with westbound jughandle
3.73 6.00 Rockaway Boulevard / Farmers Boulevard
Gap in designation
Nassau Inwood 0.00 0.00 Burnside Avenue
Lawrence 1.71 2.75 Seagirt Boulevard Trumpet interchange
1.96 3.15 Atlantic Beach Bridge toll barrier
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

See also

References

  1. ↑ 1.0 1.1 Lua error in package.lua at line 80: module 'strict' not found.
  2. ↑ 2.0 2.1 2.2 2.3 Lua error in package.lua at line 80: module 'strict' not found.
  3. ↑ 3.0 3.1 3.2 3.3 3.4 Lua error in package.lua at line 80: module 'strict' not found.
  4. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  5. ↑ 5.0 5.1 Lua error in package.lua at line 80: module 'strict' not found.
  6. ↑ 6.0 6.1 Lua error in package.lua at line 80: module 'strict' not found.
  7. ↑ 7.0 7.1 7.2 Lua error in package.lua at line 80: module 'strict' not found.
  8. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  9. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  10. ↑ 10.0 10.1 Lua error in package.lua at line 80: module 'strict' not found.
  11. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  12. ↑ 12.0 12.1 Lua error in package.lua at line 80: module 'strict' not found.
  13. ↑ 13.0 13.1 13.2 Lua error in package.lua at line 80: module 'strict' not found.
  14. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  15. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  16. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  17. ↑ 17.0 17.1 17.2 Lua error in package.lua at line 80: module 'strict' not found.
  18. ↑ National Bridge Inventory, a database compiled by the United States Department of Transportation Federal Highway Administration, available at www.nationalbridges.com.
  19. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  20. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  21. ↑ Lua error in package.lua at line 80: module 'strict' not found.

External links

 
Search Wikimedia Commons
   Wikimedia Commons has media related to:

Script error: No such module "Attached KML".

Retrieved from "https://infogalactic.com/w/index.php?title=New_York_State_Route_878&oldid=4106086"