Quadrant roadway intersection

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
A single quadrant roadway intersection.

A quadrant roadway intersection adds an additional "quadrant roadway" between two legs of the intersection. This roadway adds two three-way intersections in addition to the original four-way intersection moving all left turns (in right-hand traffic countries) or right turns (in left-hand traffic countries) from the main intersection. The design is intended to improve traffic flow by reducing signal timing phases from four to two in the main intersection. The design is intended for intersections where large artery routes meet in an area of dense development and high pedestrian volume.[1][2]

Proponents also point to a reduction in places where accidents could occur from vehicles potentially crossing paths as well as a low development cost compared to roundabouts or the more complex single-point urban interchange designs.[1][3][4] Opponents point to the increase in points where accidents could occur with merging traffic as well as the non-traditional nature of the design which has the potential to confuse drivers. Opponents also refute low cost claims pointing to right-of-way and construction costs of the quadrant road.[1][3]

Variants

Single quadrant intersections (pictured above) feature a single quadrant road. Double quadrant intersections add an additional quadrant road placed opposite of the other quadrant road. Another variant links grade-separated roads via the quadrant road, typically to bring together a faster road with denser traffic with an overpass (or flyover) over a less traveled, slower road. This design is also referred to as a single-loop intersection.[4]

A One Quadrant Interchange uses an overpass and two T-intersections.[5] This is the only and very common one quadrant variant in Germany, where it is called a "Partial At-grade Intersection" (German: Teilplangleicher Verkehrsknoten).[6]

Examples

Canada

The single-loop variant is used frequently in the Thornhill area, in the Greater Toronto Area in Ontario, Canada, examples include:

United States

Germany

  • [13] Dortmund, Northrhein-Westphalia, Ardey-/Hagener Straße and Stockumer Straße

References

  1. 1.0 1.1 1.2 Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.[dead link]
  3. 3.0 3.1 Lua error in package.lua at line 80: module 'strict' not found.
  4. 4.0 4.1 Lua error in package.lua at line 80: module 'strict' not found.
  5. [1]
  6. Institut für Straßen- und Eisenbahnwesen am KIT: Entwurf und Bau von Straßen – Teil: Straßenentwurf. (PDF; 8,44 MB) Abgerufen am 7. September 2013.
  7. Lua error in package.lua at line 80: module 'strict' not found.