This is a good article. Click here for more information.

Snake River

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Snake River
Lewis River, Shoshone River, Mad River, Saptin River, Yam-pah-pa, Lewis Fork
The Snake River flowing through the Palouse region about 10 miles (16 km) above its mouth on the Columbia River
Country United States
States Wyoming, Idaho, Oregon, Washington
Region Pacific Northwest
Tributaries
 - left Hoback River, Salt River, Portneuf River, Owyhee River, Malheur River, Powder River, Imnaha River, Grande Ronde River
 - right Henrys Fork, Malad River, Boise River, Payette River, Salmon River, Clearwater River, Palouse River
Cities Homedale, Idaho, Idaho Falls, Idaho, Twin Falls, Idaho, Lewiston, Idaho, Tri-Cities, Washington, Blackfoot, Idaho, Burley, Idaho, American Falls, Idaho
Source Rocky Mountains
 - location Yellowstone National Park, Wyoming
 - elevation 8,927 ft (2,721 m) [1]
 - coordinates Lua error in package.lua at line 80: module 'strict' not found. [2]
Mouth Columbia River
 - location Franklin / Walla Walla counties, near Burbank, Washington[3]
 - elevation 358 ft (109 m) [4]
 - coordinates Lua error in package.lua at line 80: module 'strict' not found. [2]
Length 1,078 mi (1,735 km) [5]
Basin 107,510 sq mi (278,450 km2) [6]
Discharge for Ice Harbor Dam, Washington, 9.5 miles (15.3 km) above the mouth
 - average 54,830 cu ft/s (1,550 m3/s) [7]
 - max 409,000 cu ft/s (11,580 m3/s) [8]
 - min 2,700 cu ft/s (80 m3/s)
Map of the Snake River watershed
Wikimedia Commons: Snake River
This article is about the river in the northwestern United States. For other uses, see Snake River (disambiguation).

The Snake River is a major river of the greater Pacific Northwest in the United States. At 1,078 miles (1,735 km) long, it is the largest tributary of the Columbia River, the largest North American river that empties into the Pacific Ocean.[9] Rising in western Wyoming, the river flows through the Snake River Plain of southern Idaho then through the rugged Hells Canyon area via northeastern Oregon and the rolling Palouse Hills to reach its mouth near the Washington Tri-Cities area, where it continues as part of the Columbia. Its drainage basin encompasses parts of six U.S. states, and its average discharge is over 54,000 cubic feet per second (1,500 m3/s).

Rugged mountains divided by rolling plains characterize the physiographically diverse watershed of the Snake River. The Snake River Plain was created by a volcanic hotspot which now lies underneath Yellowstone National Park, the headwaters of the Snake River. Gigantic glacial-retreat flooding episodes that occurred during the previous Ice Age carved out many topographical features including various canyons and ridges along the middle and lower Snake. Two of these catastrophic flooding events significantly affected the river and its surrounds.

More than 11,000 years ago, prehistoric Native Americans lived along the Snake. Salmon from the Pacific Ocean spawned in the millions in the river. These fish were central to the lives of the people along the Snake below Shoshone Falls. By the time Lewis and Clark crossed the Rockies and sighted the valley of a Snake tributary, the Nez Perce and Shoshone were the most powerful people in the region. Contact with Europeans introduced horses to some tribes, reshaping their lifestyles for the next few hundred years before outside settlement. Later explorers and fur trappers further changed and used the resources of the Snake River basin. At one point, a hand sign made by the Shoshones representing fish was misinterpreted to represent a snake, giving the Snake River its name.

By the middle 19th century, the Oregon Trail, a pioneer trail of which a major portion followed the Snake River, had been established. Steamboats and railroads moved agricultural products and minerals along the river throughout the 19th and early 20th centuries. The powerful, steep flow of the Snake River has been utilized since the 1890s to generate hydroelectricity, enhance navigation and provide irrigation water from fifteen major dams that have transformed the lower river into a series of reservoirs, several of which have been proposed for removal to restore some of the river's once-tremendous salmon runs.

Course

File:Snake River with Teton Range in background.jpg
The Snake River exits Jackson Lake and winds southwards through Jackson Hole.
File:Yellowstone tourist feels cold stream water on summer morning.jpg
Tourist feels cold waters of the Snake River in Grand Teton National Park (1974 photograph).

Formed by the confluence of three tiny headstreams on the southwest flank of Two Oceans Plateau in western Wyoming and Yellowstone National Park, the Snake starts out as a small river flowing west and south into Jackson Lake. Its first 50 miles (80 km) run through the valley of Jackson Hole, which cuts between the Teton Range and the Continental Divide. The Snake takes a large bend northwest through Snake River Canyon, cutting through the Snake River Range and into eastern Idaho, receiving first the Hoback and Greys Rivers before entering Palisades Reservoir where it is also met by the Salt River at the mouth of Star Valley. After passing through Palisades Dam, the Snake River empties onto the Snake River Plain, a vast physiographic province extending through southern Idaho across the massif of the Rocky Mountains and underlain by the Snake River Aquifer, one of the most productive aquifers in the United States.[10][11][12][13][14]

Southwest of the city of Rexburg, the Snake receives from the right the Henrys Fork, sometimes called the North Fork of the Snake River. The confluence with the Henrys Fork takes the river southwards through downtown Idaho Falls, rounding the Fort Hall Indian Reservation and into American Falls Reservoir, receiving the Portneuf River. The Portneuf River Valley is an overflow channel that in the last glacial period carried floodwaters from pluvial Lake Bonneville into the Snake River Plain, carving out many topographic features and significantly altering the Snake River landscape. The Snake River resumes its journey westwards, then enters the Snake River Canyon of Idaho, where it drops over Shoshone Falls, a waterfall that marks the historical upriver limit of migrating salmon,[10][15] and passing under the Perrine Bridge.[11][16] Close to Twin Falls, the Snake approaches the southernmost point in its entire course, after which it starts to flow generally northwest.[10][11][13][14]

The Clearwater River (left) joins the Snake River (center) at Lewiston

Shortly after it passes within 30 miles (48 km) of the Idaho state capital of Boise, the river surges past the state border into Oregon, close to where it meets the Owyhee River, Boise River and Payette River. The Snake River then begins to define the roughly 200-mile-long (320 km) Idaho-Oregon state border, which follows the river into Hells Canyon, a steep and spectacular gorge that cuts through the Salmon River Mountains and Blue Mountains of Idaho and Oregon. Hells Canyon is one of the most rugged and treacherous portions of the course of the Snake River, which pioneers on the Oregon Trail and steamboat operators in the 19th century had great difficulty negotiating. There were hundreds of rapids in Hells Canyon, some of which have been stilled by the three dams of the Hells Canyon Hydroelectric Project: Hells Canyon, Oxbow, and Brownlee.[10][13][14][17]

The Salmon River, the largest tributary of the Snake River, meets the river in one of the remotest areas of its entire course, nearly at the halfway point in Hells Canyon. From there, the Snake crosses into Washington and Idaho, receiving the Grande Ronde River from the west before receiving the Clearwater River at Lewiston, the uppermost major city on the navigable stretch of the Snake. As the Snake leaves Hells Canyon and spreads into the low-lying Palouse Hills of eastern Washington, the Lower Snake River Project's four dams have transformed the Snake River into a series of reservoirs. The confluence of the Snake and Columbia rivers has been submerged in Lake Wallula, the reservoir of McNary Dam. The Columbia River then flows about 325 miles (523 km) further to the Pacific Ocean, cutting through the Cascade Range by way of the Columbia River Gorge.[10][13][14]

Geology

As recently as 165 million years ago, most of western North America was still part of the Pacific Ocean. The nearly complete subduction of the Farallon Plate underneath the westward-moving North American Plate created the Rocky Mountains, which were pushed up by rising magma trapped between the sinking Farallon plate and the North American plate. As the North American Plate moved westwards over a stationary hotspot beneath the crust, a series of tremendous lava flows and volcanic eruptions carved out the Snake River Plain beginning about 12 million years ago, west of the Continental Divide.[18] Even larger lava flows of Columbia River basalts issued over eastern Washington, forming the Columbia Plateau southeast of the Columbia and the Palouse Hills in the lower Snake.[19] Separate volcanic activity formed the northwestern portion of the plain, an area far from the path of the hotspot which now lies beneath Yellowstone National Park.[18] At this point, the Snake River watershed was beginning to take shape.

Locations of the Yellowstone hotspot as it passed through the Snake River Plain

The Snake River Plain and the gap between the Sierra Nevada and Cascade Range formed a "moisture channel" running as far inland as the headwaters of the Snake River. Rainclouds from the Pacific Ocean blown into the moisture channel travel eastwards over 1,000 miles (1,600 km). When the Teton Range uplifted about 9 million years ago along a detachment fault running north–south through the central Rockies,[20] rainclouds began to encounter a barrier at the eastern end of the channel, gorging the headwaters of the Snake River with frequent rainfall. These rains fed the Snake River, helping it to cut through the Tetons, forming the Snake River Canyon of Wyoming. About 6 million years ago, the Salmon River Mountains and Blue Mountains at the far end of the plain began to rise, and as the river cut through the rising mountains, the ancestral Hells Canyon was formed. Lake Idaho, formed during the Miocene, covered a large portion of the Snake River Plain between Twin Falls and Hells Canyon, and its lava dam was finally breached about 2 million years ago.[21]

Shoshone Falls near Twin Falls, Idaho

Lava flowing from Cedar Butte in present southeast Idaho blocked the Snake River at Eagle Rock, about 42,000 years ago, near the present-day site of American Falls Dam. A 40-mile (64 km)-long lake, known as American Falls Lake, formed behind the barrier. The lake was stable and survived for nearly 30,000 years. About 14,500 years ago, pluvial Lake Bonneville in the Great Salt Lake area, formed in the last glacial period, spilled catastrophically down the Portneuf River into the Snake in an event known as the Bonneville Flood.[22] This was one of the first in a series of catastrophic flooding events in the Northwest known as the Ice Age Floods. The deluge caused American Falls Lake to breach its natural lava dam, which was rapidly eroded away with only the 50-foot (15 m)-high American Falls left in the end. The flood waters of Lake Bonneville, approximately twenty times the flow of the Columbia River or 5,300,000 cubic feet per second (150,000 m3/s), swept down the Snake River leaving debris and sediment deposits across southern Idaho. For miles on either side of the Snake flood waters stripped away soils and scoured the underlying basalt bedrock, in the process creating Shoshone Falls, Twin Falls, Crane Falls, and Swan Falls, while cutting and deepening gorges and canyons along the way.[23] The Bonneville flood waters continued through Hells Canyon. The flood widened Hells Canyon but did not deepen it.[24][25]

The extraordinarily flat and expansive Snake River Plain was the result of the Lake Bonneville floods and the Yellowstone Hotspot

As the Bonneville Floods rushed down the Snake River, the Missoula Floods occurred in the same period, but farther north. The Missoula Floods, which took place over 40 times in the time span from 15,000 to 13,000 years ago, were caused by Glacial Lake Missoula on the Clark Fork repeatedly being impounded by ice dams then breaking through, with the lake's water rushing over much of eastern Washington in massive surges far larger than the Lake Bonneville Flood. These floods pooled behind the Cascade Range into enormous lakes and spilled over the northern drainage divide of the Snake River watershed, carving deep canyons through the Palouse Hills. The Palouse River canyon was the largest of the many gorges cut through the Palouse Hills, and could not have become as large as it now is if it were not for the Missoula Floods. The Lake Bonneville floods and the Missoula Floods helped widen and deepen the Columbia River Gorge, a giant water gap which allows water from the Columbia and Snake rivers to take a direct route through the Cascade Range to the Pacific.[24][26][27]

The massive amounts of sediment deposited by the Lake Bonneville Floods in the Snake River Plain also had a lasting effect on most of the middle Snake River. The high hydraulic conductivity of the mostly-basalt rocks in the plain led to the formation of the Snake River Aquifer, one of the most productive aquifers in North America. Many rivers and streams flowing from the north side of the plain sink into the aquifer instead of flowing into the Snake River, a group of watersheds called the lost streams of Idaho.[28] The aquifer filled to hold nearly 100,000,000 acre feet (120 km3) of water, underlying about 10,000 square miles (26,000 km2) in a plume 1,300 feet (400 m) thick.[29] In places, water exits from rivers at rates of nearly 600 cubic feet per second (17 m3/s).[23] Much of the water lost by the Snake River as it transects the plain issues back into the river at its western end, by way of many artesian springs.[12][30][31]

Watershed

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

See also: Columbia River Basin
File:Snake River in Washington.jpg
The Snake River flows through an arid gorge nearing its mouth in Washington

The Snake River is the thirteenth longest river in the United States.[9] Its watershed is the 10th largest among North American rivers, and covers almost 108,000 square miles (280,000 km2) in portions of six U.S. states: Wyoming, Idaho, Nevada, Utah, Oregon, and Washington, with the largest portion in Idaho. Most of the Snake River watershed lies between the Rocky Mountains on the east and the Columbia Plateau on the northwest. The largest tributary of the Columbia River, the Snake River watershed makes up about 41% of the entire Columbia River Basin. Its average discharge at the mouth constitutes 31% of the Columbia's flow at that point.[32][33] Above the confluence, the Snake is slightly longer than the Columbia—1,078 miles (1,735 km)[5] compared to 928 miles (1,493 km)[34]—and its drainage basin is slightly larger—4% bigger than the upstream Columbia River watershed.[6][35]

The mostly semi-arid, even desert climate of the Snake River watershed on average, receives less than 12 inches (300 mm) of precipitation per year. However, precipitation in the Snake River watershed varies widely. At Twin Falls, in the center of the Snake River Plain, the climate is nearly desert, with an annual rainfall of just 9.24 inches (235 mm), although the average snowfall is 13.1 inches (330 mm).[36] This desert climate occupies the majority of the basin of the Snake River, so although it is longer than the Columbia River above the Tri-Cities, its discharge is on average significantly less. However, in the high Rockies of Wyoming, in the upper Jackson Hole area, the average precipitation is over 30 inches (760 mm), and snowfall averages 252 inches (6,400 mm).[37] Most of the Snake River basin consists of wide, arid plains and rolling hills, bordered by high mountains. In the upper parts of the watershed, however, the river flows through an area with a distinct alpine climate. There are also stretches where the river and its tributaries have incised themselves into tight gorges. The Snake River watershed includes parts of Yellowstone National Park, Grand Teton National Park, Hells Canyon National Recreation Area, and many other national and state parks.

Map of the Columbia River basin with the Snake River highlighted in yellow and the Columbia River in blue

Much of the area along the river, within a few miles of its banks, is irrigated farmland, especially in its middle and lower course. Irrigation dams include American Falls Dam, Minidoka Dam, and C.J. Strike Dam. Aside from water from the river, water is also pulled from the Snake River Aquifer for irrigation. Major cities along the river include Jackson in Wyoming, Twin Falls, Idaho Falls, Boise, and Lewiston in Idaho, and the Tri-Cities in Washington (Kennewick, Pasco and Richland). There are fifteen dams in total along the Snake River, which aside from irrigation, also produce electricity, maintain a navigation channel along part of the river's route, and provide flood control.[38] However, fish passage is limited to the stretch below Hells Canyon.[39]

The Snake River watershed is bounded by several other major North American watersheds, which drain both to the Atlantic or the Pacific, or into endorheic basins. On the southwest side a divide separates the Snake watershed from Oregon's Harney Basin, which is endorheic. On the south, the Snake watershed borders that of the Humboldt River in Nevada, and the watershed of the Great Salt Lake (the Bear, Jordan and Weber rivers) on the south.[40] The Snake River also shares a boundary with the Green River to the southeast; the Green River drains parts of Wyoming and Utah and is the largest tributary of the Colorado River. On the western extremity for a short stretch the Continental Divide separates the Snake watershed from the Bighorn River, a tributary of the Yellowstone River, which the Snake begins near. On the north the Snake River watershed is bounded by the Red Rock River, a tributary of the Beaverhead River, which flows into the Jefferson River and into the Missouri River, part of the Gulf of Mexico drainage basin.[40]

The rest of the Snake River watershed borders on several other major Columbia River tributaries - mostly the Spokane River to the north, but also Clark Fork in Montana to the northeast and the John Day River to the west. Of these, the Clark Fork (via the Pend Oreille River) and the Spokane join the Columbia above the Snake, while the John Day joins downstream of the Snake, in the Columbia River Gorge. It is of note that the northeastern divide of the Snake River watershed forms the Idaho-Montana boundary, so the Snake River watershed does not extend into Montana.[40]

Mountain ranges in the Snake watershed include the Teton Range, Bitterroot Range, Clearwater Mountains, Seven Devils Mountains, and the extreme northwestern end of the Wind River Range. Grand Teton is the highest point in the Snake River watershed, reaching 13,775 feet (4,199 m) in elevation. The elevation of the Snake River is 358 feet (109 m) when it joins the Columbia River.[2]

Pollution

Agricultural runoff from farms and ranches in the Snake River Plain and many other areas has severely hurt the ecology of the river throughout the 20th century. After the first irrigation dams on the river begun operation in the first decade of the 20th century, much of the arable land in a strip a few miles wide along the Snake River was cultivated or turned to pasture, and agricultural return flows began to pollute the Snake. Runoff from several feedlots was dumped into the river until laws made the practice illegal.[41] Fertilizer, manure and other chemicals and pollutants washed into the river greatly increase the nutrient load, especially of phosphorus, fecal coliforms and nitrogen. During low water, algae blooms occur throughout the calm stretches of the river, depleting its oxygen supply.[42]

File:Milner-dam-id-us.jpg
Dams like Milner Dam divert water from the Snake River for irrigation, which causes many of the pollution problems in the Snake.

Much of the return flows do not issue directly back into the Snake River, but rather feed the Snake River Aquifer underneath the Snake River Plain. Water diverted from the river for irrigation, after absorbing any surface pollutants, re-enters the ground and feeds the aquifer. Although the aquifer has maintained its level, it has become increasingly laced with contaminants. Water in the aquifer eventually travels to the west side of the Snake River Plain and re-enters the river as springs.[43] Throughout much of the Snake River Plain and Hells Canyon, excessive sediment is also a recurring problem.[44] In December 2007, the U.S. Environmental Protection Agency (EPA) issued a permit requiring owners of fish farms along the Snake River to reduce their phosphorus discharge by 40%. Pollutant levels in Hells Canyon upstream of the Salmon River confluence, including that of water temperature, dissolved nutrients, and sediment, are required to meet certain levels.[45]

Discharge

The Snake River's average flow is 54,830 cubic feet per second (1,553 m3/s). The United States Geological Survey recorded the river's discharge from a period of 1963–2000 at a stream gauge below Ice Harbor Dam. In that period, the largest average annual flow recorded was 84,190 cubic feet per second (2,384 m3/s) in 1997, and the lowest was 27,100 cubic feet per second (770 m3/s) in 1992.[7] The lowest recorded daily mean flow was 2,700 cubic feet per second (76 m3/s) on February 4, 1979. On August 27, 1965, there was temporarily no flow as a result of testing at Ice Harbor Dam. The highest recorded flow was 312,000 cubic feet per second (8,800 m3/s) on June 19, 1974.[7] The highest flow ever recorded on the Snake River was at a different USGS stream gauge near Clarkston, which operated from 1915 to 1972. This gauge recorded a maximum flow of 369,000 cubic feet per second (10,400 m3/s)—more than the Columbia's average discharge—on May 29, 1948. An even larger peak discharge, estimated at 409,000 cubic feet per second (11,600 m3/s), occurred during the flood of June 1894.[8]

The river's flow is also measured at several other points in its course. Above Jackson Lake, Wyoming, the discharge is about 885 cubic feet per second (25.1 m3/s) from a drainage area of 486 square miles (1,260 km2).[46] At Minidoka, Idaho, about halfway through the Snake River Plain, the river's discharge rises to 7,841 cubic feet per second (222.0 m3/s).[47] However, at Buhl, Idaho, only about 50 miles (80 km) downstream, the river's flow decreases to 4,908 cubic feet per second (139.0 m3/s) because of agricultural diversions and seepage.[48] But at the border of Idaho and Oregon, near Weiser at the beginning of Hells Canyon, the Snake's flow rises to 17,780 cubic feet per second (503 m3/s) after receiving several major tributaries such as the Payette, Owyhee and Malheur.[49] The discharge further increases to 19,530 cubic feet per second (553 m3/s) at Hells Canyon Dam on the border of Idaho and Oregon.[50] At Anatone, Washington, downstream of the confluence with the Salmon, one of the Snake's largest tributaries, the mean discharge is 34,560 cubic feet per second (979 m3/s).[51]

History

File:Snake River Scene 1920.jpg
Snake River Scene by L.T. Walter 1920

Name

Canadian explorer David Thompson first recorded the Native American name of the Snake River as Shawpatin when he arrived at its mouth by boat in 1800. When the Lewis and Clark Expedition crossed westwards into the Snake River watershed in 1805, they first gave it the name Lewis River, Lewis Fork or Lewis's Fork, as Meriwether Lewis was the first of their group to sight the river.[52] They also made note of the "Snake Indians" who lived along the river, who were actually the Shoshone tribe, and learned that the Native Americans called the river Ki-moo-e-nim or Yam-pah-pa (for an herb that grew prolifically along its banks).[53] Later American explorers, some of whom were originally part of the Lewis and Clark expedition, journeyed into the Snake River watershed and records show a variety of names have been associated with the river. The explorer Wilson Price Hunt of the Astor Expedition named the river as Mad River. Others gave the river names including Shoshone River (after the tribe) and Saptin River.[2] Eventually, the name Snake River was derived from an S-shaped gesture the Shoshone tribe made with their hands to represent swimming salmon. Explorers misinterpreted it to represent a snake, giving the river its present-day name.[54]

Early inhabitants

The Tetons - Snake River (1942) by Ansel Adams

People have been living along the Snake River for at least 11,000 years. Historian Daniel S. Meatte divides the prehistory of the western Snake River Basin into three main phases or "adaptive systems". The first he calls "Broad Spectrum Foraging", dating from 11,500 to 4,200 years before present. During this period people drew upon a wide variety of food resources. The second period, "Semisedentary Foraging", dates from 4,200–250 years before present and is distinctive for an increased reliance upon fish, especially salmon, as well as food preservation and storage. The third phase, from 250 to 100 years before present, he calls "Equestrian Foragers". It is characterized by large horse-mounted tribes that spent long amounts of time away from their local foraging range hunting bison.[55] In the eastern Snake River Plain there is some evidence of Clovis, Folsom, and Plano cultures dating back over 10,000 years ago.

Early fur traders and explorers noted regional trading centers, and archaeological evidence has shown some to be of considerable antiquity. One such trading center in the Weiser area existed as early as 4,500 years ago. The Fremont culture may have contributed to the historic Shoshones, but it is not well understood. Another poorly understood early cultural component is called the Midvale Complex. The introduction of the horse to the Snake River Plain around 1700 helped in establishing the Shoshone and Northern Paiute cultures.[56][57]

On the Snake River in southeastern Washington there are several ancient sites. One of the oldest and most well-known is called the Marmes Rockshelter, which was used from over 11,000 years ago to relatively recent times. The Marmes Rockshelter was flooded in 1968 by Lake Herbert G. West, the Lower Monumental Dam's reservoir.[58]

Eventually, two large Native American groups controlled most of the Snake River: the Nez Perce, whose territory stretched from the southeastern Columbia Plateau into northern Oregon and western Idaho, and the Shoshone, who occupied the Snake River Plain both above and below Shoshone Falls. Lifestyles along the Snake River varied widely. Below Shoshone Falls, the economy centered on salmon, who often came up the river in enormous numbers. Salmon were the mainstay of the Nez Perce and most of the other tribes below Shoshone Falls. Above the falls, life was significantly different. The Snake River Plain forms one of the only relatively easy paths across the main Rocky Mountains for many hundreds of miles, allowing Native Americans both east and west of the mountains to interact. As a result, the Shoshone centered on a trading economy.

According to legend, the Nez Perce tribe was first founded in the valley of the Clearwater River, one of the Snake River's lowermost major tributaries. At its height, there were at least 27 Nez Perce settlements along the Clearwater River and 11 more on the Snake between the mouth of the Clearwater and Imnaha Rivers. There were also villages on the Salmon River, Grande Ronde River, Tucannon River, and the lower Hells Canyon area. The Snake River's annual salmon run, which was estimated at that time to exceed four million in good years, supported the Nez Perce, who lived in permanent, well-defined villages, unlike the nomadic southeastern tribes along the Snake River. The Nez Perce also were involved in trade with the Flathead tribe to the north and other middle Columbia River tribes. However, they were enemies to the Shoshone and the other upstream Snake River tribes.[59]

The Shoshone or Shoshoni were characterized by nomadic groups that took their culture from the earlier Bitterroot culture and Great Basin tribes that migrated north via the Owyhee River. They were the most powerful tribe in the Rocky Mountains area, and were known to many Great Plains tribes as the "Snakes". In the 18th century, Shoshone territory extended beyond the Snake River Plain, extending over the Continental Divide into the upper Missouri River watershed and even further north into Canada.[60] A smallpox epidemic brought by European explorers and fur trappers was responsible for wiping out much of the Shoshone east of the Rocky Mountains, but the Shoshone continued to occupy the Snake River Plain. Eventually, the Shoshone culture merged with that of the Paiute and Bannock tribes, which came from the Great Basin and the Hells Canyon area, respectively. The Bannock brought with them the skill of buffalo hunting and horses they had acquired from Europeans, changing the Shoshone way of life significantly.[61]

Exploration and settling

The Lewis and Clark Expedition (1804–06) was the first American group to cross the Rocky Mountains and sail down the Snake and Columbia rivers to the Pacific Ocean.[62] Meriwether Lewis supposedly became the first American to sight the drainage basin of the Snake River after he crossed the mountains a few days ahead of his party on August 12, 1805, and sighted the Salmon River valley (a major Snake tributary) from Lemhi Pass, a few miles from the present-day site of Salmon, Idaho. The party later traveled north, descended the Lemhi River to the Salmon and attempted to descend it to the Snake, but found it impassable because of its violent rapids. The expedition named the Snake River the Lewis River, Lewis's River, or Lewis Fork, in his honor, and they traveled northwards to the Lochsa River, which they traveled via the Clearwater River into the lower Snake, and into the Columbia. They also referred to the Shoshone Indians as the "Snake Indians", which became the present-day name of the river.[63][64] The name "Lewis Fork", however, did not last.[62]

File:Snake River near Taylor's Bridge, by Jackson, William Henry, 1843-1942 cleaned.jpg
The Snake River near Jackson, Wyoming, in 1871

Later American explorers traveled throughout the Snake River area and up its major tributaries beginning in 1806, just after Lewis and Clark had returned. The first was John Ordway in 1806, who also explored the lower Salmon River. John Colter in 1808 was the first to sight the upper headwaters of the Snake River, including the Jackson Hole area.[65] In 1810, Andrew Henry, along with a party of fur trappers, discovered the Henrys Fork of the Snake River, which is now named after him. Donald Mackenzie sailed the lower Snake River in 1811, and later explorers included Wilson Price Hunt of the Astor Expedition (who gave the river the name "Mad River"),[66] Ramsay Crooks, Francisco Payelle, John Grey, Thyery Goddin, and many others after the 1830s.[65] Many of these later explorers were original members of the Lewis and Clark Expedition who had returned to map and explore the area in greater detail. Even later, American fur trappers scouted the area for beaver streams, but Canadian trappers from the British Hudson's Bay Company were by now a major competitor.

The Hudson's Bay Company first sent fur trappers into the Snake River watershed in 1819. The party of three traveled into the headwaters of the Owyhee River, a major southern tributary of the Snake, but disappeared.[67] Meanwhile, as American fur trappers kept coming to the region, the Hudson's Bay Company ordered the Canadian trappers to kill as many beavers as they could, eventually nearly eradicating the species from the Snake River watershed, under the "rationale [that] if there are no beavers, there will be no reason for the Yanks ([Americans]) to come."[67] Their goal was to eventually gain rights over the Oregon Territory, a region covering Washington, Oregon, Idaho, and parts of Montana and Wyoming (most of the present-day region called the Pacific Northwest).[68] However, the area was eventually annexed into the United States.

By the middle 19th century, the Oregon Trail had been established, generally following much of the Snake River. One crossing the trail made over the Snake River was near the present-day site of Ontario, Oregon. Several years later, a ferry was established at the site, replacing the old system where pioneers had to ford the wide, powerful and deep Snake. Another place where pioneers crossed the Snake was further upstream, at a place called "Three Island Crossing", near the mouth of the Boise River. This area has a group of three islands (hence the name) that splits the Snake into four channels each about 200 feet (61 m) wide. Some emigrants chose to ford the Snake and proceed down the west side and recross the river near Fort Boise into Hells Canyon, continue down the drier east side into the gorge, or float the Snake and Columbia to the Willamette River, the destination of the Oregon Trail. The reason for the Three Island Crossing was the better availability of grass and water access.[69] Numerous ferries have provided crossings of the upper Snake from the Brownlee Ferry at the head of Hell's Canyon[70] to Menor's Ferry,[71] which operates today at Moose, Wyoming. Sophistication varied from reed boats pulled by Indians on horse back at Snake Fort, Fort Boise, as described by Narcissa Whitman[72] in 1836 to an electric operated ferry, the Swan Falls Ferry,[73] at Swan Falls Dam of the early 20th century.

Steamboats

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

See also: Steamboats of the Columbia River
File:Steamboat coming up Snake River near Bishop landing 1898.JPG
An unknown steamboat sails up the Snake River in either Washington or Idaho in 1898.

Unlike the Columbia River, it was far more difficult for steamboats to navigate on the Snake. The Columbia River drops 2,690 feet (820 m) from source to mouth, while the Snake drops over 8,500 feet (2,600 m) in elevation over a length more than 200 miles (320 km) shorter. Still, from the 1860s to the 1940s, steamboats traveled on the Snake River from its mouth at the Columbia River to near the mouth of the Imnaha River in lower Hells Canyon.[74] However, most of the steamboats only sailed from the river's mouth to Lewiston, located at the confluence of the Snake and Clearwater rivers.[75] This stretch of the river is the easiest to navigate for watercraft since it has the least elevation change, although it still contained over 60 sets of rapids.[76]

Passenger and freight service downstream of Lewiston lasted throughout the late 19th century and persisted until the introduction of railroads in the Palouse Hills grain-growing region and ultimately, the construction of dams on the lower Snake to facilitate barge traffic, which caused the demise of both the steamboats and the railroad. Lewiston, 140 miles (230 km) from the confluence of the Snake and Columbia and 465 miles (748 km) from the mouth of the Columbia on the Pacific Ocean, became connected with Portland and other Pacific ports via steamboat service from the mouth of the Snake through the Columbia River Gorge.[77] A commonly traveled route was from Wallula, Washington, 120 miles (190 km) downstream of the Snake River's mouth, upstream to Lewiston.[78] The Oregon Steam Navigation Company launched the Shoshone at Fort Boise in 1866 which provided passenger and freight service on the upper Snake for the Boise and Owyhee mines.[79]

By the 1870s, the OSN Company, owned by the Northern Pacific Railroad, was operating seven steamboats for transporting wheat and grain from the productive Palouse region along the Snake and Columbia to lower Columbia River ports. These boats were the Harvest Queen, John Gates, Spokane, Annie Faxon, Mountain Queen, R.R. Thompson, and Wide West, all of which were built on the Columbia River.[80] However, there were more resources along the Snake River than wheat and grain. In the 1890s, a huge copper deposit was discovered at Eureka Bar in Hells Canyon. Several ships were built specifically to transport ore from there to Lewiston: these included Imnaha, Mountain Gem, and Norma.[81] In 1893 the Annie Faxon suffered a boiler explosion and sank on the Snake below Lewiston.[75][82]

River modifications

Dams

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Further information: List of dams of the Columbia River watershed and List of crossings of the Snake River

Many factors have influenced the construction of dams along the Snake River. A total of fifteen dams have been constructed along the Snake River for a multitude of different purposes, from its headwaters in the Rocky Mountains to its mouth on Lake Wallula, a slackwater reservoir formed behind McNary Dam on the Columbia River. Dams on the Snake can be grouped into three major categories. From its headwaters to the beginning of Hells Canyon, many small dams block the Snake to provide irrigation water. Between here and Hells Canyon, the first dam on the Snake, Swan Falls Dam, was built in 1901. In Hells Canyon, a cascade of dams produce hydroelectricity from the river's lofty decrease in elevation over a comparatively small distance. Finally, a third cascade of dams, from Hells Canyon to the mouth, facilitates navigation. Many different government and private agencies have worked to build dams on the Snake River, which now serve an important purpose for people living in the Snake's drainage basin and trade of agricultural products to Pacific seaports.

The Minidoka Irrigation Project of the U.S. Bureau of Reclamation, created with the passage of the Reclamation Act of 1902, involved the diversion of Snake River water into the Snake River Plain upstream of Shoshone Falls in order to irrigate approximately 1,100,000 acres (4,500 km2) in the Snake River Plain and store 4,100,000 acre feet (5.1 km3) of water in Snake River reservoirs.[83] The first studies for irrigation in the Plain were conducted by the United States Geological Survey in the late 19th century, and the project was authorized on April 23, 1904.[84] The first dam constructed for the project was Minidoka Dam in 1904; its power plant began operating in 1909, producing 7 MW of electricity. This capacity was revised to 20 MW in 1993.[85] However, Minidoka Dam was not the only dam constructed for the project. As far upstream as Jackson Lake in Wyoming, the Jackson Lake Dam was built in 1907 to raise the lake level for providing additional water storage for dry years. American Falls Dam, upstream of Minidoka, was completed in 1927 and replaced in 1978.[84] As the dams were constructed above Shoshone Falls, the historical upriver limit of salmon and also a total barrier to boats and ships, no provisions were made for fish passage or navigation. Several other irrigation dams were also built - including Twin Falls Dam and Palisades Dam.

Brownlee Dam, the uppermost dam of the Hells Canyon Project

The Hells Canyon Project was built and maintained by Idaho Power Company starting in the 1940s, and was the second of the three major water projects on the river. The three dams of the project, Brownlee Dam, Oxbow Dam and Hells Canyon Dam, are located in upper Hells Canyon. All three dams are primarily for power generation and flood control, and do not have fish passage or navigation locks.[86] Brownlee Dam, the most upriver dam, was constructed in 1959, and generates 728 MW of power. Oxbow Dam, the second dam in the project, was built in 1961 and generates 220 MW. The dam was named for a 3-mile (4.8 km)-wide bend in the Snake River, shaped like an oxbow, although not an oxbow lake. Hells Canyon Dam was the last and most downriver of the three, was constructed in 1967 and generates 450 MW.[38]

Downriver of the Hells Canyon is the Lower Snake River Project, authorized by the Rivers and Harbors Act of 1945, which was created by the U.S. Army Corps of Engineers to create a navigable channel on the Snake River from its mouth to the beginning of Hells Canyon.[87] These dams are, in downstream order: Lower Granite Lock and Dam, Little Goose Lock and Dam, Lower Monumental Lock and Dam, and Ice Harbor Lock and Dam. Dredging work was also done throughout the length of the navigation channel to facilitate ship passage. These dams form a cascade of reservoirs with no stretches of free-flowing river in between. Immediately below Ice Harbor Dam is Lake Wallula, formed by the construction of the McNary Dam on the Columbia River. (McNary Dam is not part of the Lower Snake River Project.) Above Lower Granite Dam, the river channel from Lewiston to Johnson Bar, just below Hells Canyon, is also maintained for jet-boats as this section is too rugged for ships.[88] These dams have been proposed for removal, and if they were to be removed, it would be the largest dam removal project ever undertaken in the United States.[89] The removal has been proposed on the grounds that it would restore salmon runs to the lower Snake River and the Clearwater River and other smaller tributaries, although there would be a loss of hydroelectric power generated by the dams.[90]

File:LGLandDam2.jpg
The Little Goose Lock and Dam

Navigation

In the 1960s and 1970s the U.S. Army Corps of Engineers built four dams and locks on the lower Snake River to facilitate shipping. The lower Columbia River has likewise been dammed for navigation. Thus a deep shipping channel through locks and slackwater reservoirs for heavy barges exists from the Pacific Ocean to Lewiston, Idaho. Most barge traffic originating on the Snake River goes to deep-water ports on the lower Columbia River, such as Portland. Grain, mostly wheat, is the main product shipped from the Snake, and nearly all of it is exported internationally from the lower Columbia River ports.

The shipping channel is authorized to be at least 14 feet (4.3 m) deep and 250 feet (76 m) wide. Where river depths were less than 14 feet (4 m), the shipping channel has been dredged in most places. Dredging and redredging work is ongoing and actual depths vary over time.[91] With a channel about 5 feet (1.5 m) deeper than the Mississippi River system, the Columbia and Snake rivers can float barges twice as heavy.[92] Agricultural products from Idaho and eastern Washington are among the main goods transported by barge on the Snake and Columbia rivers. Grain, mainly wheat, accounts for more than 85% of the cargo barged on the lower Snake River. In 1998, over Lua error in Module:Convert at line 1851: attempt to index local 'en_value' (a nil value). of grain were barged on the Snake. Before the completion of the lower Snake dams, grain from the region was transported by truck or rail to Columbia River ports around the Tri-Cities. Other products barged on the lower Snake River include peas, lentils, forest products, and petroleum.[91]

Biology

Columbia River Basin

The World Wide Fund for Nature (WWF) divides the Snake River's watershed into two freshwater ecoregions: the "Columbia Unglaciated" ecoregion and the "Upper Snake" ecoregion. Shoshone Falls marks the boundary between the two. The WWF placed the ecoregion boundary about 50 kilometres (31 mi) downriver from Shoshone Falls in order to include the Big Wood River (the main tributary of the Malad River) in the Upper Snake ecoregion, because the Wood River is biologically distinct from the rest of the downriver Snake. Shoshone Falls has presented a total barrier to the upstream movement of fish for 30,000 to 60,000 years. As a result, only 35% of the fish fauna above the falls, and 40% of the Wood River's fish fauna, are shared with the lower Snake River.[93][94]

The Upper Snake freshwater ecoregion includes most of southeastern Idaho and extends into small portions of Wyoming, Utah, and Nevada, including major freshwater habitats such as Jackson Lake. Compared to the lower Snake River and the rest of the Columbia River's watershed, the Upper Snake ecoregion has a high level of endemism, especially among freshwater molluscs such as snails and clams. There are at least 21 snail and clam species of special concern, including 15 that appear to exist only in single clusters. There are 14 fish species found in the Upper Snake region that do not occur elsewhere in the Columbia's watershed, but which do occur in Bonneville freshwater ecoregion of western Utah, part of the Great Basin and related to the prehistoric Lake Bonneville. The Wood River sculpin (Cottus leiopomus) is endemic to the Wood River. The Shoshone sculpin (Cottus greenei) is endemic to the small portion of the Snake River between Shoshone Falls and the Wood River.[95]

The Snake River below Shoshone Falls is home to thirty-five native fish species, of which twelve are also found in the Columbia River and four of which are endemic to the Snake: the relict sand roller (Percopsis transmontana) of the Percopsidae family, the shorthead sculpin (Cottus confusus), the maginated sculpin (Cottus marginatus), and the Oregon chub (Oregonichthys crameri). The Oregon chub is also found in the Umpqua River and nearby basins. The lower Snake River also supports seven species of salmon (Oncorhynchus). There are also high, often localized levels of mollusc endemism, especially in Hells Canyon and the basins of the Clearwater River, Salmon River, and middle Snake River. The mollusc richness extends into the lower Columbia River and tributaries such as the Deschutes River.[95]

Animals

Aside from aquatic species, much of the Snake River watershed supports larger animals including numerous species of mammals, birds, amphibians, and reptiles. Especially in the headwaters and the other mountainous areas strewn throughout the watershed, the gray wolf, grizzly bear, wolverine, mountain lion and Canada lynx are common. It has been determined that there are 97 species of mammals in the upper part of the Snake River, upstream from the Henrys Fork confluence.[11] Pronghorn and bighorn sheep are common in the area drained by the "lost streams of Idaho", several rivers and large creeks that flow south from the Rocky Mountains and disappear into the Snake River Aquifer. About 274 bird species, some endangered or threatened, use the Snake River watershed, including bald eagle, peregrine falcon, whooping crane, greater sage-grouse, and yellow-billed cuckoo. Barrow's goldeneye are a species of bird that occurs commonly along the lower section of the Snake River.[11]

File:Snakeriver.jpg
In the middle reaches of the Snake River as it flows through the Snake River Plain, introduced species have fared better than native species.

Ten amphibian and twenty species of reptiles inhabit the upper Snake River's wetland and riparian zones. Several species of frogs are common in the "lost streams" basin and the northeasternmost part of the Snake River watershed, including the inland tailed frog, northern leopard frog, western toad, Columbia spotted frog, long-toed salamander, spadefoot toad.[11] However, in the lower and middle portions of the Snake River watershed, several native species have been severely impacted by agriculture practices and the resulting non-native species supported by them. Introduced birds include the gray partridge, ring-necked pheasant, and chukar. Other non-native species include the bullfrog, brown-headed cowbird, and European starling, attracted by the construction of cities and towns.[96]

Plants

File:Oxbow Bend overlook of Snake River.JPG
The headwaters of the Snake River remain heavily forested, especially inside protected areas.

The Snake River watershed includes a diversity of vegetation zones both past and present.[11] A majority of the watershed was once covered with shrub-steppe grassland, most common in the Snake River Plain and also the Columbia Plateau in southeastern Washington. Riparian zones, wetlands and marshes once occurred along the length of the Snake River and its tributaries. In higher elevations, conifer forests, of which ponderosa pine is most common, dominate the landscape. The basin ranges from semi-desert to alpine climates, providing habitat for hundreds of species of plants. In the lowermost part of the watershed, in southeastern Washington, the Snake River is surrounded by an area called the Columbia Plateau Ecoprovince, which is now mostly occupied by irrigated farms. The rest of the Plateau area is characterized by low hills, dry lakes, and an arid, nearly desert climate.[96]

The headwaters of the Snake River and the high mountains elsewhere in the watershed were historically heavily forested. These include aspen, Douglas fir, and spruce fir, comprising about 20% of the historic watershed. At the base of mountains and in the Lost River basin, sagebrush was and is the predominant vegetation cover. Because of deforestation, up to one-fourth of the forests have been taken over by sagebrush, leaving the remaining forests to cover about 15% of the watershed. However, the lodgepole pine has increased in number, taking over historic stands of other conifers. There are also up to 118 species of rare or endemic plants that occur in the Snake River watershed.[11]

Salmon and other anadromous fish

The Snake River was once one of the most important rivers for the spawning of anadromous fish—which are hatched in the headwaters of rivers, live in the ocean for most of their lives, and return to the river to spawn—in the United States.[97][98] The river supported species including chinook salmon, coho salmon, and sockeye salmon, as well as steelhead, white sturgeon, and Pacific lamprey. It is known that before the construction of dams on the river, there were three major chinook salmon runs in the Snake River; in the spring, summer and fall, totaling about 120,000 fish, and the sockeye salmon run was about 150,000. The historical barrier to fish migration on the Snake River was Shoshone Falls, a waterfall that occurs as the Snake River passes through the Snake River Plain.[97]

Reaches such as this one in Hells Canyon are no longer accessible to salmon due to the construction of dams.

Since the early 20th century, when Swan Falls Dam was constructed on the middle Snake River upstream of Hells Canyon, the fifteen dams and reservoirs on the river have posed an increasing problem for migrating salmon. Agricultural lands and their resulting runoff have also had a significant impact on the success rate of migrating fish. Salmon can travel up the Snake River as far as Hells Canyon Dam, using the fish passage facilities of the four lower Snake River dams, leaving the Clearwater, Grande Ronde and Salmon river to sustain spawning salmon. Rising in several forks in the Clearwater Mountains of central Idaho, the Clearwater and Salmon River watersheds are nearly undeveloped with the enormous exception of Dworshak Dam on the North Fork Clearwater River. The watershed of the Grande Ronde in northeastern Oregon is also largely undeveloped. The four reservoirs formed by the lower Snake River dams—Lake Sacagawea, Lake Herbert G. West, Lake Bryan, and Lower Granite Lake—have also formed problems, as the downstream current in the pools is often not enough for the fish to sense, confusing their migration routes.[17][99]

At the confluence of the Snake and Clearwater Rivers, young salmon that swim down from spawning gravels in the headwaters of the Clearwater River often delay their migrations because of a significant temperature difference. (Prior to the removal of Lewiston Dam on the main Clearwater and Grangeville Dam on the South Fork Clearwater, the Clearwater was completely unusable by migrating salmon.[100]) Agricultural runoff and water held in reservoirs higher upstream on the Snake warm its waters as it flows through the Snake River Plain, so as the Snake meets the Clearwater, its average temperature is much higher. Directly below the confluence, the river flows into Lower Granite Lake, formed by Lower Granite Dam, the uppermost dam of the Lower Snake River Project. Paradoxically, the combination of these factors gives the young salmon further time to grow and to feed in Lower Granite Lake, so when they begin the migration to the Pacific Ocean, they often have a higher chance at survival, compared to those salmon who migrate to the ocean earlier.[99]

Lower Snake River dam removal

A controversy has erupted since the late 20th century over the four lower Snake River dams, with the primary argument being that removing the dams would allow anadromous fish to reach the lower Snake River tributaries—the Clearwater River, the Tucannon River and the Grande Ronde River—and spawn in much higher numbers. However, removal of the dams has been fiercely opposed by some groups in the Pacific Northwest.[101] Because much of the electricity in the Northwest comes from dams, removing the four dams would create a hole in the energy grid that would not be immediately replaceable.[102] Navigation on the lower Snake would also suffer, as submerged riffles, rapids and islands would be exposed by the removal of the dams. Irrigation pumps for fields in southeastern Washington would also have to reach further to access the water of the Snake River. However, aside from restoring salmon runs, dam removal proponents argue that the power is replaceable, that the grain transportation system could be replaced by railroads, and that only one of the four reservoirs supplies irrigation water. Irrigators in the Snake River Plain would likely need to allow less water into the Snake River during low flow in order to create a current in the four lower reservoirs, and recreation and tourism would likely benefit.[103]

In response to conflicts, a bill has been introduced in the U.S. Congress proposing the study of the feasibility of removing these four lower dams.[104][105] The issue of dam removal was not in the recovery plan set forth by the Obama administration in September 2009. The plan instead recommended monitoring the effects of climate change and expanding habitat improvement efforts, leaving dam removal as “a last resort” contingent upon a multiyear study of the dams.[106] In February 2010 U.S. Circuit Judge James Redden deemed this plan to be inadequate and gave NOAA three months to formulate a better plan.[107] The plan was resubmitted in May 2010 with few substantial changes[108] and has faced strong opposition from salmon advocates. A final decision from Judge Redden is expected in the spring of 2011.[109]

Tributaries

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

See also: List of tributaries of the Columbia River
The Clearwater River is the largest tributary of the Snake River.

The Salmon River is the second largest tributary. Although the Salmon has a larger drainage than the Clearwater, the Salmon drains much drier country and therefore has a smaller discharger than the Clearwater, about 8,000,000 acre feet (9.9 km3) annually compared to about 11,000,000 acre feet (14 km3) annually for the Clearwater River.

File:Us-id-henrys-fork.jpg
Henrys Fork is the largest tributary upstream of the Snake River Plain.
The Grande Ronde River meets the Snake near the middle part of Hells Canyon.
The Salmon River is the second largest tributary, joining the Snake in Hells Canyon.

The Snake River has over 20 major tributaries, most of which are in the mountainous regions of the basin. The largest by far is the Clearwater River, which drains 9,000 square miles (23,000 km2) in north central Idaho. Many of the rivers that flow into the Snake River Plain from the north sink into the Snake River Aquifer, but still contribute their water to the river. Aside from rivers, the Snake is fed by many significant springs, many of which arise from the aquifer on the west side of the plain.[11]

Name Length Watershed size Bank
Source to Wyoming-Idaho Border
Heart River 8.5 miles (13.7 km) Right
Lewis River 12 miles (19 km) Right
Gros Ventre River 642 square miles (1,660 km2) Left
Hoback River 55 miles (89 km) 600 square miles (1,600 km2) Left
Greys River 65 miles (105 km) 800 square miles (2,100 km2) Left
Salt River 70 miles (110 km) 890 square miles (2,300 km2) Left
Snake River Plain to Hells Canyon
Henrys Fork (Snake River) 110 miles (180 km) 3,212 square miles (8,320 km2) Right
Portneuf River 96 miles (154 km) 1,329 square miles (3,440 km2) Left
Raft River 1,506 square miles (3,900 km2) Left
Malad River 11.5 miles (18.5 km) 3,000 square miles (7,800 km2) Right
Salmon Falls Creek 218 miles (351 km) 2,082 square miles (5,390 km2) Left
Bruneau River 3,305 square miles (8,560 km2) Left
Boise River 75 miles (121 km) 4,100 square miles (11,000 km2) Right
Owyhee River 280 miles (450 km) 11,049 square miles (28,620 km2) Left
Malheur River 165 miles (266 km) 4,700 square miles (12,000 km2) Right
Payette River 62 miles (100 km) 3,240 square miles (8,400 km2) Right
Hells Canyon
Weiser River 90 miles (140 km) 1,660 square miles (4,300 km2) Right
Burnt River 50 miles (80 km) Left
Salmon River 425 miles (684 km) 14,000 square miles (36,000 km2) Right
Grande Ronde River 212 miles (341 km) 4,000 square miles (10,000 km2) Left
Clearwater River 80 miles (130 km) 9,645 square miles (24,980 km2) Right
Idaho-Washington border to mouth
Tucannon River 70 miles (110 km) 503 square miles (1,300 km2) Left
Palouse River 140 miles (230 km) 3,303 square miles (8,550 km2) Right
The Snake River bends through Hells Canyon on the Idaho–Oregon border, looking towards Idaho, with the Oxbow Dam in the background.

See also

<templatestyles src="Div col/styles.css"/>

References

  1. ↑ Google Earth elevation for GNIS source coordinates. Retrieved on April 29, 2007
  2. ↑ 2.0 2.1 2.2 2.3 Lua error in package.lua at line 80: module 'strict' not found.
  3. ↑ the road atlas. p. 109. 2009. ISBN 0-528-94200-X.
  4. ↑ Google Earth elevation for GNIS mouth coordinates. Retrieved on April 29, 2007
  5. ↑ 5.0 5.1 United States Geological Survey. National Hydrography Dataset high-resolution flowline data. The National Map, accessed May 4, 2011
  6. ↑ 6.0 6.1 Lua error in package.lua at line 80: module 'strict' not found.
  7. ↑ 7.0 7.1 7.2 Lua error in package.lua at line 80: module 'strict' not found.
  8. ↑ 8.0 8.1 Lua error in package.lua at line 80: module 'strict' not found.
  9. ↑ 9.0 9.1 Lua error in package.lua at line 80: module 'strict' not found.
  10. ↑ 10.0 10.1 10.2 10.3 10.4 Lua error in package.lua at line 80: module 'strict' not found.
  11. ↑ 11.0 11.1 11.2 11.3 11.4 11.5 11.6 11.7 11.8 Lua error in package.lua at line 80: module 'strict' not found.
  12. ↑ 12.0 12.1 Lua error in package.lua at line 80: module 'strict' not found.
  13. ↑ 13.0 13.1 13.2 13.3 Lua error in package.lua at line 80: module 'strict' not found.
  14. ↑ 14.0 14.1 14.2 14.3 Lua error in package.lua at line 80: module 'strict' not found.
  15. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  16. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  17. ↑ 17.0 17.1 Lua error in package.lua at line 80: module 'strict' not found.
  18. ↑ 18.0 18.1 Lua error in package.lua at line 80: module 'strict' not found.
  19. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  20. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  21. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  22. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  23. ↑ 23.0 23.1 Lua error in package.lua at line 80: module 'strict' not found.
  24. ↑ 24.0 24.1 Lua error in package.lua at line 80: module 'strict' not found.
  25. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  26. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  27. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  28. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  29. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  30. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  31. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  32. ↑ The percentage is calculated by adding the discharge at Priest Rapids Dam on the Columbia to the discharge at Ice Harbor Dam on the Snake. Priest Rapids is the closest USGS gauge upstream of the Snake confluence that has a reliable discharge record.
  33. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  34. ↑ Upstream Columbia mileage calculated by subtracting 325 (Snake River confluence mile) from 1243 (the length of the Columbia). 325 miles (523 km) below the Snake confluence comes from river mileage markers on USGS topo maps.
  35. ↑ The watershed of the Columbia upstream of the Snake River confluence is 97,190 square miles (251,700 km2), just slightly smaller than that of the Snake.
  36. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  37. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  38. ↑ 38.0 38.1 Lua error in package.lua at line 80: module 'strict' not found.
  39. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  40. ↑ 40.0 40.1 40.2 Lua error in package.lua at line 80: module 'strict' not found.
  41. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  42. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  43. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  44. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  45. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  46. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  47. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  48. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  49. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  50. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  51. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  52. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  53. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  54. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  55. ↑ Summary of Western Snake River Prehistory, Digital Atlas of Idaho
  56. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  57. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  58. ↑ "Marmes Rockshelter". HistoryLink. Retrieved 2013-06-24.
  59. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  60. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  61. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  62. ↑ 62.0 62.1 Gulick, p. 17
  63. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  64. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  65. ↑ 65.0 65.1 Lua error in package.lua at line 80: module 'strict' not found.
  66. ↑ Gulick (Snake River Country), p. 24
  67. ↑ 67.0 67.1 Lua error in package.lua at line 80: module 'strict' not found.
  68. ↑ Gulick (Snake River Country), p. 32
  69. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  70. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  71. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  72. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  73. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  74. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  75. ↑ 75.0 75.1 Lua error in package.lua at line 80: module 'strict' not found.
  76. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  77. ↑ Steamboats on Northwest Rivers, p. xiii
  78. ↑ Steamboats on Northwest Rivers, p. 93
  79. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  80. ↑ Steamboats on Northwest Rivers, p. 122
  81. ↑ Steamboats on Northwest Rivers, p. 162
  82. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  83. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  84. ↑ 84.0 84.1 Lua error in package.lua at line 80: module 'strict' not found.
  85. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  86. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  87. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  88. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  89. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  90. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  91. ↑ 91.0 91.1 Lua error in package.lua at line 80: module 'strict' not found.
  92. ↑ Harden, Blaine (1996) A River Lost: The Life and Death of the Columbia, W.W. Norton & Company. ISBN 0-393-31690-4
  93. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  94. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  95. ↑ 95.0 95.1 Lua error in package.lua at line 80: module 'strict' not found.
  96. ↑ 96.0 96.1 Lua error in package.lua at line 80: module 'strict' not found.
  97. ↑ 97.0 97.1 Lua error in package.lua at line 80: module 'strict' not found.
  98. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  99. ↑ 99.0 99.1 Lua error in package.lua at line 80: module 'strict' not found.
  100. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  101. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  102. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  103. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  104. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  105. ↑ H.R.3503 - Salmon Solutions and Planning Act (GovTrack)
  106. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  107. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  108. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  109. ↑ Lua error in package.lua at line 80: module 'strict' not found.

External links

Retrieved from "https://infogalactic.com/w/index.php?title=Snake_River&oldid=18401"