Stahlhelm

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Stahlhelm (plural Stahlhelme) is German for "steel helmet". The Imperial German Army began to replace the traditional boiled leather Pickelhaube (spiked combat helmet) with the Stahlhelm during World War I in 1916. The term Stahlhelm refers both to a generic steel helmet, and more specifically to the distinctive (and iconic) German design.

The Stahlhelm, with its distinctive "coal scuttle" shape, was an instantly recognizable icon for military imagery and became a common element of military propaganda on both sides, just like the Pickelhaube before it.

Its name was also used by the Stahlhelm, a paramilitary nationalist organization established at the end of 1918.

German Stahlhelm from WWII.

Background

At the beginning of World War I, none of the combatants were issued with any form of protection for the head other than cloth and leather caps, designed at most to protect against saber cuts. When trench warfare began, the number of casualties on all sides suffering from severe head wounds (more often caused by shrapnel bullets or shell fragments than by gunfire) increased dramatically, since the head was typically the most exposed part of the body when in a trench. The French were the first to see a need for more protection—in late 1915 they began to issue Adrian helmets to their troops.[1][2] The British and Commonwealth troops followed with the Brodie helmet (a development of which was also later worn by US forces) and the Germans with the Stahlhelm.

As the German army behaved hesitantly in the development of an effective head protection, some units developed provisional helmets in 1915. Stationed in the rocky area of the Vosges the Army Detachment „Gaede“ recorded significantly more head injuries caused by stone and shell splinters than did troops in other sectors of the front. The artillery workshop of the Army Detachment developed a helmet that consisted of a leather cap with a steel plate (6mm thickness). The plate protected not only the forehead but also the eyes and nose.[3][4]

Origin

World War I German stormtrooper on the Western Front wearing the Stahlhelm.

The design of the Stahlhelm was carried out by Dr. Friedrich Schwerd of the Technical Institute of Hanover. In early 1915, Schwerd had carried out a study of head wounds suffered during trench warfare and submitted a recommendation for steel helmets, shortly after which he was ordered to Berlin. Schwerd then undertook the task of designing and producing a suitable helmet[5] broadly based on the 15th century sallet, which provided good protection for the head and neck.[6]

After lengthy development work, which included testing a selection of German and Allied headgear, the first Stahlhelms were tested in November 1915 at the Kummersdorf Proving Ground and then field tested by the 1st Assault Battalion. Thirty thousand examples were ordered, but it was not approved for general issue until New Year 1916, hence it is most usually referred to as the "Model 1916". In February 1916 it was distributed to troops at Verdun, following which the incidence of serious head injuries fell dramatically. The first German troop who had to use this helmet had been the stormtroopers of the Sturm-Bataillon Nr. 5 (Rohr) which had been commanded by captain Rohr.

In contrast to the Hadfield steel used in the British Brodie helmet, the Germans used a harder martensitic silicon/nickel steel. As a result, and also due to the helmet's form, the Stahlhelm had to be formed in heated dies at a greater unit cost than the British helmet, which could be formed in one piece.[7]

Models

The different Stahlhelm designs are named for their year of introduction. For example, the Modell 1942 which was introduced in 1942 is commonly known as M1942 or simply M42. Here, they are referred to by their M19XX names.

M1916 and M1917

1916 Stahlhelm with 1918 camouflage pattern applied in the field. (Musée de l'Armée)

The Stahlhelm was introduced into regular service during the Verdun campaign in early 1916.

The M1916 design had side-mounted horn-like ventilator lugs which were intended to be support for an additional steel brow plate or Stirnpanzer, which only ever saw limited use by snipers and trench raiding parties, as it was too heavy for general use.[8]

The shell came in different sizes, from 60 to 68, with some size 70s reported. Helmet weight varied from 0.98 kg to 1.4 kg, depending on shell size. The suspension, or liner, consisted of a headband with three segmented leather pouches, each holding padding materials, and leather or fabric cords could be adjusted to provide a comfortable fit. The one-piece leather chin strap was attached to the shell by M1891 chinstrap lugs, the same kind used in the Pickelhaube helmet.

The M1916 design provided excellent protection: Reserve Lieutenant Walter Schulze of 8th Company Reserve Infantry Regiment 76 described his combat introduction to the helmet on the Somme, 29 July 1916:

"... suddenly, with a great clanging thud, I was hit on the forehead and knocked flying onto the floor of the trench... a shrapnel bullet had hit my helmet with great violence, without piercing it, but sufficiently hard to dent it. If I had, as had been usual up until a few days previously, been wearing a cap, then the Regiment would have had one more man killed."[9]

But the helmet was not without its flaws. The ventilator horns often let cold air in during the winter, requiring the wearer to block the vents with mud or fabric. The large, flared skirt tended to make it difficult for soldiers to hear, distorting surrounding sounds and creating an echo when the wearer spoke.

Originally painted Feldgrau (field grey), the Stahlhelm was often camouflaged by troops in the field using mud, foliage, cloth covers, and paint. Official issue cloth covers in white and grey appeared in late 1916 and early 1917. Camouflage paint was not formally introduced until July 1918, when German Army Order II, No 91 366, signed by General Erich Ludendorff on 7 July 1918, outlined official standards for helmet camouflage. The order stipulated that helmets should be painted in several colors, separated by a finger-wide black line. The colors should be relevant to the season, such as using green, brown and ochre in summer.[8]

After the effectiveness of the M1916 design was validated during the 1916 campaigns, incremental improvements were subsequently made. The M1917 version saw improvements to the liner, but was otherwise identical to the original design.

M1918

World War I Stahlhelm and anti-shrapnel body armour.

Extensive redesigns were made for the M1918 model. A new two-piece chin strap was introduced, and was attached directly to the helmet liner rather than the shell. Certain examples of the M1918 had cutouts in the rim along the sides of the helmet. It has incorrectly been said that these cutouts were to accommodate using headphones while wearing the helmet. These cutouts were actually done to improve hearing and to reduce echo created by the large, flared skirt.

The M1918 Stahlhelm can be distinguished from the M1916, as the M1918 shell lacks the chinstrap rivet on the lower side of the helmet skirt found on earlier models.

Austro-Hungarian variants

Austro-Hungarian soldiers at the Isonzo front with Stahlhelms.
The Austrian Berndorfer variant.

Austria-Hungary purchased about 416,000 German helmets from November 1916 till the end of the war and also began its own licensed production starting in May 1917. Around a million Stahlhelms of all variants were issued till the end of the war.[10]

Austrian M17

The Austrian M17 helmet was similar to the German M16, but was colored golden-brown (known as Isonzo-braun), had a cloth chinstrap and had the chinstrap rivet located higher up on the steel shell. From May 1917 till the end of WWI 534,013 were produced,[10] many of which were manufactured at the Krupp in Berndorf, Lower Austria. Other production locations included:

Hungarian M18

The Hungarian M18 variant was similar to the Austrian M17 design, but the chinstrap rivet was smaller in size and located even higher up than the Austrian version. It was colored in golden-brown (known as Isonzo-braun). These were manufactured at the Krupp in Berndorf, Lower Austria.

Berndorfer variant

There was also a quite different, domestically developed Berndorfer variant. 139,968 were produced from May till November 1917 at the Krupp in Berndorf, Lower Austria[10]

Ottoman variant

Germany delivered 5,400 visorless versions of the M1918 helmet for the Ottoman Empire. The missing front visor was thought by the Germans to be for religious reasons,[12] and it was claimed that it was to allow Turkish soldiers to touch their foreheads to the ground during prayer, without removing their helmets. However, this story has been disputed. The Turks rejected any more than the 5,400 delivered and an unknown number from the overrun were issued to German armed forces and were used by German Freikorps units after the war.

M1933

German SS wearing the M1933 Stahlhelm version.
German Reichswehr soldiers wearing the M1933 Stahlhelm.

In 1932 the Army High Command ordered the testing of a new prototype helmet intended to replace the older models. It was made entirely from a composite plastic material called "Vulkanfiber". The Model 1933 Vulkanfiber helmet kept the basic form of previous helmets, but was much lighter. It was put into limited production following favourable field tests in early 1933 and small numbers were issued to Reichswehr infantry, artillery and communications units. It was removed from service following the introduction of the M1935 helmet and most of the remaining stock were reissued to civil organizations such as fire brigades and police forces.[13] Some examples were also retained for parade use by senior officers, who were not generally issued with the Stahlhelm.

M1935

Chinese Nationalist Army soldiers were wearing M1935 helmets during WWII.

In 1934 tests began on an improved Stahlhelm, whose design was a development of World War I models. The Eisenhüttenwerke company[clarification needed] of Thale carried out prototype design and testing, with Dr. Friedrich Schwerd once again taking a hand.

The new helmet was pressed from sheets of molybdenum steel in several stages. The size of the flared visor and skirt was reduced, and the large projecting lugs for the obsolete armor shield were eliminated. The ventilator holes were retained, but were set in smaller hollow rivets mounted to the helmet's shell. The edges of the shell were rolled over, creating a smooth edge along the helmet. Finally, a completely new leather suspension, or liner, was incorporated that greatly improved the helmet's safety, adjustability, and comfort for each wearer. These improvements made the new M1935 helmet lighter, more compact, and more comfortable to wear than the previous designs.

The Army's Supreme Command officially accepted the new helmet on June 25, 1935 and it was intended to replace all other helmets in service.[13]

More than 1 million M1935 helmets were manufactured in the first two years after its introduction, and millions more were produced until 1940 when the basic design and production methods were changed.

M1940

The M1935 design was slightly modified in 1940 to simplify its construction, the manufacturing process now incorporating more automated stamping methods. The principal change was to stamp the ventilator hole mounts directly onto the shell, rather than utilizing separate fittings. In other respects, the M1940 helmet was identical to the M1935. The Germans still referred to the M1940 as the M1935, while the M1940 designation were given by collectors.[14]

Fallschirmjäger version

Fallschirmjäger in 1943/1944

A variant of the M1935 helmet with a shell lacking the projecting visor and deep, flared rim was issued to Fallschirmjäger (German paratrooper) units. It was so designed in order to lessen the risk of head injury on landing after a parachute jump; also to reduce the significant wind resistance and resulting neck trauma. Early Fallschirmjäger helmets were manufactured from existing M1935 helmets by removing the undesirable projections, which were omitted when the new design entered full production.[15] The modified shell also incorporated a completely different and more substantial liner and chinstrap design that provided far more protection for German airborne troops. The chinstrap featured a four-point retention system that has come into use again by modern combat helmets such as the MICH since the late 1990s.

M1942

The M1942 design was a result of wartime demands. The rolled edge on the shell was eliminated, creating an unfinished edge along the rim. This edge slightly flared out, along the base of the skirt. The elimination of the rolled edge expedited the manufacturing process and reduced the amount of metal used in each helmet. Shell paint colors were typically matte gray-green (army) or gray-blue (Luftwaffe), and the decals were eliminated in 1943 to speed up production and reduce the helmet's combat visibility. Greater manufacturing flaws were also observed in M1942 helmets made late in the war.[16]

M1944

A simpler variant, designed in 1944 by Prof. Dr.-Ing. Fry and his collaborator Dr. Hansel from the Institute for Defense Technical Materials Science in Berlin, was also stamped out of one piece of metal, but with sloped sides. Similar in appearance to the British 1944 Type Mk III helmet.[17] Allegedly personally rejected by Hitler as being too foreign.[18]

M1945

There have been reports of a variant manufactured in the last months of the war. The M1945 was reported to have been similar to the M1942 design, but did away completely with the ventilator. These helmets are reported to be extremely rare. Many collectors and historians are of the opinion that the M1945 helmet is either just a regular M1942 helmet that lacked the vents simply because of machine malfunctions in the factory, or unfinished M1942 that were completed in the post-war era.[16]

M1954

A variant of the M1944 with a modified suspension system, developed further into the M1956.

M1956

M1956 East German Stahlhelm

The East German M-56 helmet was originally designed in 1942 as a replacement for the M1935/M1940 model Stahlhelms. The design was never progressed and was unused until the requirement for a new German helmet for the Volkspolizei and the National People's Army arose, it being realized that the reintroduction of the traditional Stahlhelm would not have been tolerated by the Soviet Union.[19] The 1942 design was likely chosen because it was the most similar of all German designs to the most recognizable Soviet helmets, in particular the iconic SSh-40 design. Indeed, the M-56 was similar enough in appearance to the SSh-40 that some Westerners failed to realize its German origins altogether and assumed the East Germans had adopted a Soviet design.

The M-56 helmet came in three basic versions, Mod 1 or I/56, Mod 2 or I/57 and Mod 3 or I/71, and was widely sold (or given) to Third World armies.

Decals and insignia

Third Reich helmet decals of the army.
The Chinese Nationalist Insignia
Insignia of the Bolivian Army Colorados regiment, showing a Stahlhelm and two crossed bayonets

After Stahlhelm shells were painted, the colours of which varied by organization, small identification or insignia decals usually were affixed to one or both sides of the helmet. Almost every military, naval, and political organization had its own distinctive insignia, which was applied as decals to the sides of helmets.[20] The right side of early M35 helmets bore the tricolored shield of black, white, and red stripes, the traditional national colors of Imperial Germany (cf. the black, red, and gold of today's Germany, harking back to the 1848 Revolt). The left side of the shell often received decal insignia denoting the branch of the armed forces, or Wehrmacht, or an organization within the Nazi Party.

The Wehrmacht consisted of the Heer (army), the Kriegsmarine (navy), and the Luftwaffe (air force). While not technically part of the Wehrmacht, the Waffen-SS ("Armed-SS") tactically operated as such and was considered part of Germany's armed forces during the war. The same was true of some Sturmabteilung (SA) units, along with other subsidiary organizations, which functioned as part of the armed forces particularly towards the end of the war. Wehrmacht branches typically displayed distinctive emblems in the form of decals on their helmets. The Heer, or army, displayed a black shield bearing the frontal view of a silver-colored German eagle holding a swastika in its talons (known as the Reichsadler), while the navy used the same eagle emblem in gold. Luftwaffe decals displayed the side view of an eagle in flight, also holding a swastika. The SS was both a paramilitary and a political organization, and its black runic initials on a silver-colored shield (normally applied to the right side of the shell) looked like twin lightning bolts. Other military, political, and civil or defense organizations used similar decal insignia to distinguish their helmets. Such visible identification devices were gradually abandoned as the war progressed, however, so that by war's end most Wehrmacht helmet insignia had been eliminated to reduce the wearer's visibility in combat.

For the Chinese Nationalist Army soldiers, their M35 helmets were printed with the Chinese Nationalist Insignia in both sides.

Stahlhelm use in other countries

Chinese Nationalist Army soldiers wearing the M1935 helmet.
Polish resistance fighters of the Polish Home Army during the Warsaw Uprising.

Germany exported versions of the M1935 helmet to various countries. Versions of the M1935 Stahlhelm were sent to Republic of China from 1935 to 1936 and M1935 helmet was the main helmet of the Chinese Nationalist Army during WWII. Spain also received shipments of the helmet. During the inter-war years several military missions were sent to South America under the command of Hans Kundt, after Chaco War the Bolivian army used to wear the helmet up until recently. The exported M1935 helmets were similar to the German issue, except for a different liner. Hungary produced its own 35M helmet; it was a modified German M1935 helmet. Hungary used a variation of the M1942 helmet that had a metal belt loop on the back of the shell. Some countries manufactured their own helmets using the M1935 design, and this basic design was in use in various nations as late as the 1970s.

After the end of World War I Poland seized large quantities of M1918 helmets. Most of those were later sold to various countries, including Spain. However, at the end of the 1930s it was discovered that the standard Polish wz. 31 helmet was unsuitable for tank troops and motorized units; while offering decent protection, it was too large and heavy. As a stop-gap measure before a new helmet was developed, the General Staff decided to issue M1918 helmets to the 10th Motorized Cavalry Brigade, which used them during the Polish Defensive War.

During the time of the Warsaw Uprising the helmet was also worn by the members of the Polish Home Army and it was during this time that the helmet became the symbol of the resistance, as every Stahlhelm worn by the soldier of the underground army signified a dead German occupier it was taken from.

During the inter-war years, the Irish Defence Forces equipped its troops with a copy of the M1918 helmet manufactured by Vickers. At the outbreak of World War II, Ireland remained neutral, but in 1940 Ireland's rapidly expanding Army replaced this helmet with British-style helmets as Vickers had stopped manufacturing the helmet. Switzerland used a helmet that was roughly similar to the M1916, but had a shallower, more rounded crown and skirt. This was to protect against the harsh winter winds of the alpine regions.

Swiss Model 1918 Helmet

The Argentine Army adopted a similar model during World War II, reflecting the traditional sympathy towards Germany found in many of the officers.

In the Socialist Federal Republic of Yugoslavia, due to large quantities captured by World War II Partisans, the Stahlhelm was used in Yugoslav People's Army up to the 1959, when was phased out and replaced by M 59 steel helmet.

Postwar

Chilean honor guard next to U.S. Admiral Michael G. Mullen in March 2009
German firefighting helmet

After World War II, West Germany's Bundesgrenzschutz border guards and some West German police units kept the Stahlhelm in their inventories (police units can be seen wearing them during footage of the Black September hostage crisis in 1972), and the Fallschirmjäger variant was used for some time by the GSG 9. With the re-armament of West Germany the Bundeswehr introduced the United States Army M1 Helmet which was replaced by a Kevlar helmet (Gefechtshelm), similar to the modern US helmets, in the 1990s. German firefighter units today still use Stahlhelm-shaped helmets in a fluorescent color.

East Germany's National People's Army M-56 helmet was modelled on an unused 1942 German design with a more conical shape.[19] The Chilean Army still uses the Stahlhelm design for ceremonial purposes, as well as the Bolivian Army. There are also some Japanese bicycle helmets (with accompanying goggles) that resemble the Stahlhelm.

The U.S. Army's 1980s and 1990s era Kevlar Personnel Armor System for Ground Troops Helmet was sometimes called the "Fritz helmet" for its resemblance to the Stahlhelm. The U.S. Army and Marines have continued to use a design akin to the PASGT helmet with the MICH TC-2000 Combat Helmet and Lightweight Helmet, respectively.

The Chinese People's Liberation Army soldiers still used M1935 helmets which were captured from the Chinese Nationalist Army during the Chinese Civil War until the 1970s.

Since 2012, El Salvador's Policia Nacional Civil use a navy/indigo blue-colored helmet that strongly rembles the Stahlhelm; this helmet is used by some members of the riot-control unit and rarely used by the Police's assault teams.

User (M1935, M1940 and M1942)

A Chinese Nationalist Army soldier wearing the German M35 helmet during WWII.

See also

Notes

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. https://www.jonsmith-modellbau.com/de/products/weapons-equipment-spare-parts/individual-parts/german-headdress/
  4. http://www.zib-militaria.de/Gaede-Stahlhelm
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. [1] Archived August 28, 2008 at the Wayback Machine
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. 8.0 8.1 Lua error in package.lua at line 80: module 'strict' not found.
  9. Quoted in Sheldon, German Army on the Somme, page 219. Sheldon quotes and translates from Gropp, History of IR 76, p 159.
  10. 10.0 10.1 10.2 Lua error in package.lua at line 80: module 'strict' not found.
  11. http://www.alexanderandsonsrestorations.com/About-WWI&WWII-helmets/
  12. Tubbs, p. 24
  13. 13.0 13.1 Lua error in package.lua at line 80: module 'strict' not found.
  14. Lua error in package.lua at line 80: module 'strict' not found.
  15. Lua error in package.lua at line 80: module 'strict' not found.
  16. 16.0 16.1 Lua error in package.lua at line 80: module 'strict' not found.
  17. Hancock, M. Donald. The Bundeswehr and the National People's Army: A Comparative Study of German Civil-Military Polity. University of Denver, 1973. p 25.
  18. Army Uniforms Since 1945 - Blandford Colour Series, Digby; Illustrated by Chappell, Michael Smith, Blandford Press (1984), ASIN: B000JZF5MY
  19. 19.0 19.1 Tubbs, p. 80-81
  20. Lua error in package.lua at line 80: module 'strict' not found.

References

External links