2010–11 Australian region cyclone season

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
2010–11 Australian region cyclone season
Season summary map
First system formed 28 October 2010
Last system dissipated 20 April 2011
Strongest storm1 Yasi – 929 hPa (mbar), 205 km/h (125 mph) (10-minute sustained)
Tropical lows 28
Tropical cyclones 10
Severe tropical cyclones 5
Total fatalities 3 total
Total damage $3.64 billion (2011 USD)
1Strongest storm is determined by lowest pressure
Australian region tropical cyclone seasons
2008–09, 2009–10, 2010–11, 2011–12, 2012–13
Related articles

The 2010–11 Australian region cyclone season was a near average tropical cyclone season, with eleven tropical cyclones forming compared to an average of 12. The season began on 1 November 2010 and ended on 30 April 2011, although the first tropical cyclone formed on 28 October. The Australian region is defined as being to south of the equator, between the 90th meridian east and 160th meridian east. Tropical cyclones in this area are monitored by five Tropical Cyclone Warning Centres (TCWC's): Jakarta, Port Moresby, Perth, Darwin, and Brisbane, each of which have the power to name a tropical cyclone. The TCWC's in Perth, Darwin, and Brisbane are run by the Bureau of Meteorology, who designate significant tropical lows with a number and the U suffix. The Joint Typhoon Warning Center also issues unofficial warnings for the region, designating significant tropical cyclones with the "S" suffix when they form west of 135°E, and the "P" suffix when they form east of 135°E.

Seasonal forecasts

TSR forecasts
Date		 Tropical
storms		 Severe Tropical
cyclones		 Landfalling
cyclones		 ACE Ref
Average (1975/76—2009/10) 10.5 5.5 4.5 79 [1][2]
5 May 2010 9.3 4.9 4 -- [1]
6 July 2010 12.5 6.7 5.2 -- [3]
6 September 2010 15.1 8.1 6.1 108 [4]
9 November 2010 15.4 8.3 6.2 111 [5]
6 December 2010 15.5 8.3 6.2 111 [2]
Region Average Chance of
Above average		 Predicted
activity		 Actual activity Ref
Whole 12 98% 20-22 10
Western 7 93% 11-12 6
North-Western 4 67% 5 5
Northern 6 75% 7-8 0
Eastern 4 87% 6-7 4
Forecast
Center		 Tropical
lows		 Tropical
cyclones		 Severe tropical
cyclones		 Ref
Actual activity: BoM 28 10 5
Actual activity: JTWC 13 13 6

Ahead of the cyclone season, the Australian Bureau of Meteorology (BoM), the New Zealand National Institute of Water and Atmospheric Research (NIWA) and various other Pacific Meteorological services, all contributed towards the Island Climate Update tropical cyclone outlook that was released during October 2010.[6] The outlook took into account the moderate-strong La Nina conditions that had been observed across the Pacific and analogue seasons that had La Nina conditions occurring during the season.[6][7] The outlook called for a normal or above average number of tropical cyclone occurring during the season, with nine to twelve named tropical cyclones, to occur between 135°E and 120°W compared to an average of nine.[6] At least three of the tropical cyclones were expected to become category 3 severe tropical cyclones, while one was expected to become a category 4 severe tropical cyclone.[6] In addition to contributing towards the Island Climate Update outlook, the BoM issued seven seasonal forecasts during October 2010, for the Australian region and the Southern Pacific with each forecast covering the whole tropical cyclone year.[8] Each forecast issued took into account the La Nina conditions that had developed over the region and were forecasted to persist during the season.[8]

For the Australian region as a whole it was predicted that the season could be the most active season since 1983–84 and that between 20 - 22 tropical cyclones would either develop within or move into the basin compared to an average of 12 cyclones.[8][9] For the Western region between 90°E and 125°E, the BoM forecast that the area would see between 11 and 12 tropical cyclones compared to the average of 7, it was also noted that the region had a 93% chance of an above average cyclone season.[8] For the North-Western subregion between 105°E and 130°E, it was predicted that activity would be above average, with 5 tropical cyclones and a 67% chance of above average tropical cyclone activity.[8] TCWC Perth also noted that there was a likelihood of two tropical cyclones and a significant likelihood of at least one severe tropical cyclone impacting Western Australia.[10] It was also noted that there was an increased chance of an early season cyclone and a system impacting Western Australia before Christmas 2010.[10] It was predicted that the Northern Territory between 125°E and 142.5°E had a 75% chance of an above average season, and that the first cyclone of the season over the Territory and the monsoon onset would be expected to be earlier than normal.[8][11] The Eastern region between 142.5°E and 160°E had a 87% chance of an above average season, with 7-8 tropical cyclones predicted for the region compared to an average of 6.[8][12] The BoM also issued forecasts for the Western Southern Pacific region, between 142.5°E and 165°E and the Eastern Southern Pacific region between 165°E and 120°W.[13] It was predicted that the Western Southern Pacific would have a 79% chance of having an above average season with 7-8 tropical cyclones occurring within the region, compared to an average of 5 tropical cyclones.[13] The Eastern Southern Pacific region was predicted to have a 33% chance of having an above average season and 5-6 tropical cyclones compared to an average of 7 tropical cyclones.[13]

The Guy Carpenter Asia-Pacific Climate Impact Centre (GCACIC) at the City University of Hong Kong and the Tropical Storm Risk Consortium (TSR) at the University College London also issued seasonal forecasts for the region.[14][15]

Seasonal summary

Storms

Tropical Low Anggrek

Tropical low (Australian scale)
Tropical storm (SSHWS)
Duration 28 October – 4 November
Peak intensity 75 km/h (45 mph) (10-min)  995 hPa (mbar)

On 28 October, TCWC Perth and TCWC Jakarta reported that Tropical Low 01U had developed to the southwest of Sumatra in Indonesia.[16][17] Over the next few days as the low drifted towards the west, the system's low level circulation centre gradually developed further. Before late on 30 October, the JTWC started issuing advisories on the low as Tropical Cyclone 02S. During the next day TCWC Perth and TCWC Jakarta both reported that the low had developed into a category 1 tropical cyclone on the Australian scale, with the latter naming it Anggrek. Later that day, as Anggrek moved into TCWC Perths area of responsibility it was reported that Anggrek had further intensified into a Category 2 Tropical Cyclone. Anggrek then passed to the east of the Cocos (Keeling) Islands early on 2 November. Later that day, after passing to the east of the Cocos (Keeling) Islands, TCWC Perth reported that Tropical Cyclone Anggrek had weakened into a Category 1 Cyclone. Anggrek continued to weaken, and on 4 November, the TCWC Perth reported Anggrek had become a Tropical Low, and issued their final advisory on the system.

On November 5, the remnants of Anggrek entered the south-west Indian Ocean as a convectiveless circulation center.[18]

Throughout the Cocos (Keeling) Islands, heavy rain and gusty winds were experienced as Cyclone Anggrek passed. Only minor damage was reported, with several trees and power lines brought down. No deaths were reported across the islands. In post storm analysis, TCWC Perth declassified Anggrek as a tropical cyclone because gale force winds never extended more than halfway around the system center.[19]

Tropical Cyclone Abele

Category 2 tropical cyclone (Australian scale)
Category 1 tropical cyclone (SSHWS)
Duration 3 December (Entered basin) – 4 December
Peak intensity 95 km/h (60 mph) (10-min)  987 hPa (mbar)

Early on 3 December, TCWC Perth reported that Tropical Cyclone Abele had moved into the Australian Region from the South-West Indian Ocean as a category 2 tropical cyclone.[19][20] As it entered the region the system was located well to the southwest of the Cocos (Keeling) Islands, with the JTWC reporting that the system was equivalent to a category 1 hurricane with 1-minute sustained windspeeds of 120 km/h (75 mph).[20][21] Over the next day Abele weakened further because of cooler sea surface temperatures and increasing vertical wind shear, before it was last noted by both the JTWC and TCWC Perth during 4 December.[19][20][21]

Tropical Low 03U

Tropical low (Australian scale)
Duration 15 December – 20 December
Peak intensity 55 km/h (35 mph) (10-min)  989 hPa (mbar)

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

See also: 2010 Gascoyne River flood

On 15 December a monsoonal low developed about 500 km north-west of Exmouth, Western Australia. The system drifted slowly to the south-east. Gales and heavy rain reached areas far from the centre of the system which crossed the coast near Coral Bay on 18 December. However, shortly after landfall the system turned sharply to the south-west and reached the Indian Ocean west of Carnarvon on 19 December. It moved away from the coast and dissipated late on 20 December some 500 km west of Geraldton.[22]

In the catchment basin of the Gascoyne River heavy precipitation fell from 16 to 19 December and triggered one of the worst floods along the Gascoyne River in history. The rain also affected other river basins in the area, such as Wooramel, Murchison, Lyndon-Minilya, and Ashburton rivers. For the period from 16 to 20 December some stations reported up to 300 mm cumulated precipitation which is equivalent to the normal annual rainfall amount. The highest 24 hours rainfall was reported at Carnarvon Airport on 17 December. During that day 207.8 mm fell which set an all-time record since recording began in 1883 with the previous record 119.4 mm set on 24 March 1923.[22]

Preliminary estimates placed damage at A$100 million (US$100.4 million) with at least 2000 head of cattle lost in the flood.[22]

Tropical Cyclone Tasha

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Main article: Cyclone Tasha
Category 1 tropical cyclone (Australian scale)
Tropical storm (SSHWS)
Duration 20 December – 25 December
Peak intensity 75 km/h (45 mph) (10-min)  993 hPa (mbar)

In late December, a low pressure area was tracked for several days moving westwards towards Queensland. Early on Christmas Day (local time) it strengthened rapidly and was designated Tropical Cyclone Tasha when it was 95 km (59 mi) east northeast of Cairns. The cyclone crossed the coast between Cairns and Innisfail at about 5:30 am, with wind gusts of up to 105 km/h (65 mph) recorded off the coast. Rainfall of about 100 mm was recorded in the space of an hour.[23] Damage from associated flooding was estimated at A$1 billion.[24][25]

Tropical Low 06U

Tropical low (Australian scale)
Duration 30 December – 4 January
Peak intensity 55 km/h (35 mph) (10-min)  993 hPa (mbar)

At the end of December, a Tropical Low developed inland over the Top End of Western Australia. On 30 December, the TCWC Perth initiated cyclone advisories, as the system was initially forecasted to move off the coast of Western Australia, and strengthen into a Tropical Cyclone. Later on the same day, Tropical Low 06U moved off the coast of Western Australia, as expected, and slowly began to strengthen. After that, the low continued to strengthen, as it moved farther out west in the Indian Ocean. However, before it could reach Tropical Cyclone intensity, Tropical Low 06U dissipated completely on 4 January, and the BoM issued its final advisory on the system.

Tropical Cyclone Vince

Category 1 tropical cyclone (Australian scale)
Tropical storm (SSHWS)
Duration 10 January – 15 January
Peak intensity 75 km/h (45 mph) (10-min)  986 hPa (mbar)

At midnight on 10 January, the Bureau of Meteorology (BoM) reported that a Tropical Low had developed off the coast of Western Australia.[26] The system gradually intensified and became a Category 1 tropical cyclone on 12 January, receiving the name "Vince".[27] The cyclone was initially expected to reach Category 2 status, but it became less well organised and lost cyclone intensity on 14 January.[28]

Severe Tropical Cyclone Zelia

Category 4 severe tropical cyclone (Australian scale)
Category 2 tropical cyclone (SSHWS)
Duration 12 January – 16 January (Out of basin)
Peak intensity 185 km/h (115 mph) (10-min)  943 hPa (mbar)

On 12 January, TCWC Brisbane started monitoring Tropical Low 10U that had developed, over the Coral Sea to the northeast of Townsville in Queensland, Australia.[19][29]

Tropical Cyclone Anthony

Category 2 tropical cyclone (Australian scale)
Tropical storm (SSHWS)
Duration 22 January – 31 January
Peak intensity 100 km/h (65 mph) (10-min)  984 hPa (mbar)

During 22 January TCWC Brisbane reported that Tropical Low 11U had developed within the northwestern Coral Sea to the northeast of Cairns, Australia.[30] Over the next day atmospheric convection developed and organised over the systems low level circulation, as it moved southeastwards away from the Queensland Coast under the influence of an upper level trough of low pressure.[30] The JTWC subsequently initiated advisories on the system early on 23 January and designated it as Tropical Cyclone 09P, before TCWC Brisbane reported that the system had developed into a category 1 tropical cyclone and named it Anthony.[30][31] During that day the system may have become a category 2 tropical cyclone as radar and microwave imagery showed that Anthony had a well defined circulation and was forming a partial eyewall.[30] The system subsequently moved into an area of higher vertical windshear and weakened into a tropical low during 24 January as it moved into the South Pacific basin.[30]

The system moved back into the Australian region during 25 January but remained a tropical low over the next few days, as it moved north-westwards across the Coral Sea as a low level circulation centre with little or no associated convection.[30] During 28 January TCWC Brisbane briefly reported that Anthony had re-intensified into a category 1 tropical cyclone, after wind shear over the system reduced due to a possible Fujiwara interaction with a secondary circulation to the east of Anthony and Severe Tropical Cyclone Wilma.[30] However, later that day the system turned and started moving towards the north-west as the secondary system moved to its north, which meant that Anthony became sheared again and weakened into a tropical low.[30] The system remained a sheared tropical low until late on 29 January, when convection began to increase and organize as a result of weakening upper atmospheric wind shear.[30] During the next day as Anthony moved towards the southwest and the Queensland coast, the JTWC re-initiated advisories on the system, before reporting that it had peaked with 1-minute sustained wind speeds of 100 km/h (65 mph).[32][33] TCWC Brisbane also reported that the system had re-intensified into a category 1 tropical cyclone during that day, before reporting that it had become a category 2 tropical cyclone with peak 10-minute sustained wind speeds of 100 km/h (65 mph).[30] The system subsequently made landfall on the Queensland east coast near Bowen and rapidly weakened over land.[30]

Ahead of Anthony's landfall on the Queensland east coast, tropical cyclone watches and warnings were issued for the region between Innisfail, St Lawrence and Charters Towers.[30] Townsville and Mackay were pre-emptively declared disaster areas in order to aid the recovery response, while the ports of Townsville, Mackay, Hay Point and Abbott Point were closed.[30]

Severe Tropical Cyclone Bianca

Category 4 severe tropical cyclone (Australian scale)
Category 2 tropical cyclone (SSHWS)
Duration 23 January – 30 January
Peak intensity 175 km/h (110 mph) (10-min)  949 hPa (mbar)

Early on 21 January TCWC Darwin reported that Tropical Low 12U had developed within the Gulf of Carpentaria.[34] Gradual strengthening took place and on 25 January, the Joint Typhoon Warning Center (JTWC) began monitoring the system as Tropical Cyclone 10P.[35] A few hours later, TCWC Perth upgraded the low into a Category 1 Tropical Cyclone, naming it Bianca.[36] Early on the next day, TCWC Perth further upgraded Bianca to a Category 2 Tropical Cyclone.[37] Intensification continued and late on the same day, TCWC Perth upgraded Bianca into a Category 3 Severe Tropical Cyclone.[38] The system continued to intensify and became a Category 4 severe tropical cyclone on 28 January.[39] On the same day, the system started weakening rapidly and TCWC Perth downgraded Bianca into a Category 3 Severe Tropical Cyclone.[40]

Rain and strong winds were experienced along the Kimberley coast on 25 January. On 26 January, Bianca moved away from Kimberley and weather conditions started to improve.[41] Bianca disrupted operations in Australia's major iron ore port and several oil facilities.[42] In Western Australia, preparations were underway as the system was soon expected to approach land.[43] As soon as Bianca became a category 3 Severe tropical cyclone, strong winds lashed through Pilbara suspending oil and gas production and port facilities.[44] Though Bianca was moving away and the level of risk was going down, coastal communities between Onslow and Exmouth remained on a red alert as the system intensified.[45] On 28 January, according to the media, there was a chance for Bianca to start weakening, as it was moving further south into a colder, high pressure zone.[46]

The last cyclone to track south of Perth was Cyclone Ned in 1989.[47]

Severe Tropical Cyclone Bianca was expected to make landfall around Mandurah as a weak Category 1 or strong Tropical Low late on 30 January. A Cyclone Warning was issued for the area between just north of Jurien Bay and Albany, including Perth. However, the warnings were cancelled on 30 January as Bianca dissipated south of Western Australia in the afternoon of 30 January.[48] The airmass around Bianca was responsible for giving Perth and the Southwest of WA a taste of the tropics with severe thunderstorms, unrelated to Bianca, springing up on Saturday 29th causing damage in the Geraldton region.[49] Two deaths were attributed to damaging severe thunderstorms that formed along the storm's outer rainbands.[50]

Severe Tropical Cyclone Yasi

Category 5 severe tropical cyclone (Australian scale)
Category 4 tropical cyclone (SSHWS)
150px 150px
Duration 31 January (Entered basin) – 3 February
Peak intensity 205 km/h (125 mph) (10-min)  929 hPa (mbar)

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Main article: Cyclone Yasi

Yasi entered the Australian region from the South Pacific basin on 31 January. By the time Yasi crossed into the basin, preparations for the storm were under way. Media outlets referred to the storm as "what could be the state's worst cyclone in history." Many feared that the tropical cyclone could cause damage more severe than Cyclone Larry in 2006 and Cyclone Tracy, which nearly destroyed Darwin, in 1974.[51] Thousands of residents in the path of the storm were urged to evacuate by Premier Anna Bligh.[52]

Yasi crossed the Queensland coast near Mission Beach shortly after midnight (local time) on 3 February. At that time, the large destructive core around the eye extended between Innisfail and Cardwell, Queensland.[53] Yasi was the second costliest tropical cyclone in Australia's history after Cyclone Tracy, as well as the costliest without inflation. Yasi caused at least 3.6 billion (2011 USD) in damage.[citation needed] One death occurred due to asphyxiation in Ingham.[54]

Tropical Low 15U

Tropical low (Australian scale)
Tropical storm (SSHWS)
Duration 8 February – 13 February
Peak intensity 55 km/h (35 mph) (10-min)  996 hPa (mbar)

A low formed off the Western Australian coast on 8 February and drifted steadily west south west for the next few days.[55] On 11 February, the Bureau of Meteorology identified the system as Tropical Low 15U and began monitoring the system for further development.[56] Later that day, the JTWC began issuing advisories on the system under the name 14S.[57] The storm was expected to reach minimal category 1 cyclone intensity (Australian scale) on 12 February but high shear, cool sea temperatures and poor organisation saw the system stay as a low.[58]

Severe Tropical Cyclone Dianne

Category 3 severe tropical cyclone (Australian scale)
Category 1 tropical cyclone (SSHWS)
Duration 14 February – 22 February
Peak intensity 130 km/h (80 mph) (10-min)  962 hPa (mbar)

On 14 February TCWC Perth reported that Tropical Low 14U had developed to the northwest of Port Hedland, Western Australia.[59] Over the next few days the system remained well offshore and drifted towards the west southwest while slowly intensifying.[59]

A Cyclone watch had been issued for the coastal communities between Onslow to Coral Bay.[60] Late on 16 February, the low formed into Tropical Cyclone Dianne whilst 445 km NW of Exmouth.[61] Dianne intensified as expected and was upgraded to a Category 2 cyclone on 18 February whilst slowly moving towards the SSW.[62] On 19 February the system intensified into a Category 3 severe tropical cyclone.[63] By late 21 February the system lost its strength as it moved into colder waters and was downgraded to a Category 1 Tropical Cyclone,[64] and by 22 February it was classified as an ex-Tropical low.[65]

Severe Tropical Cyclone Carlos

Category 3 severe tropical cyclone (Australian scale)
Category 1 tropical cyclone (SSHWS)
Duration 14 February – 27 February
Peak intensity 120 km/h (75 mph) (10-min)  969 hPa (mbar)

On 14 February the Tropical Cyclone Warning Centre (TCWC) in Darwin reported that a tropical low formed near latitude 13.2S, longitude 130.7E, about 40 km (25 mi) west southwest of Batchelor. A severe weather warning was issued for northwest Darwin-Daly District and the Tiwi Islands.[66] Heavy rain pounded the area on 15 February with reports of Marrara recording 179.4 mm (7.06 in) and Darwin International Airport 131.0 mm (5.16 in) of rain.[67] This was later followed by 339.6 mm (13.37 in) of rain in just 24 hours, which is the highest 24-hour rainfall for the city on record.[68]

On 16 February the slow moving system strengthened into Tropical Cyclone Carlos causing localised flooding and damage to homes, with fallen trees.[69] Schools in Darwin, Darwin International Airport and East Arm Wharf were closed.[69] After looping around the Darwin area overnight and back over land the system weakened on 17 February and BOM downgraded it to a Tropical low.[70] A record three day total of 684.8 mm (26.96 in) rain was recorded at Darwin International Airport due to the lingering of the system.[71]

The system moved slowly southwest on 18 February moving towards the Northern Territory/Western Australian border with a possibility of restrengthening.[72] The community of Daly River received 442 mm (17.4 in) of rainfall.[72] On 19 February the system passed into the Northern Kimberley region. Rainfall totals were not as large as in previous days. Wyndham recorded 90 mm (3.5 in) while Kalumburu recorded 80 mm (3.1 in) of rainfall.[73]

In the early hours of 21 February the system returned to the open waters of the Indian Ocean, causing it to redevelop back into a cyclone.[74] The system was located 75 km (47 mi) northwest of Broome.[75] The cyclone continued to track southwest at a relatively fast pace and produced a squall line that generated four tornadoes in the mining town of Karratha[76] which damaged 38 homes as well as numerous cars, buildings and a school.[77] It also strengthened steadily to become a category 2 cyclone.[78]

On 22 February the system moved parallel to the Pilbara coast. Varanus Island recorded 59 mm (2.3 in) of rainfall and the highest wind gust recorded in the area was 120 km/h (75 mph) at Bedout Island.[77] The system became more organised and on 23 February the record rainfall amount of 283 mm (11.1 in) was recorded at Barrow Island. The strongest gusts of 139 km/h (86 mph) recorded at Varanus Island.[79] The cyclone crossed the North West Cape and lashed Onslow and Exmouth with high winds up to 155 km/h (96 mph) and rain.[80]

As Carlos moved away from the western coast of Australia on 24 February it strengthened into a Severe Tropical Cyclone. Carlos also bought a mini tornado to Ellenbrook, Perth, Western Australia on February 28. [81]

Tropical Low 18U

Tropical low (Australian scale)
Clockwise vortex
Duration 23 February – 28 February
Peak intensity 55 km/h (35 mph) (10-min)  992 hPa (mbar)

On 25 February, the Tropical Cyclone Warning Centre (TCWC) in Perth reported that a tropical low formed estimated to be 75 km (47 mi) west northwest of Kalumburu and 445 km (277 mi) northeast of Derby and moving slowly southwest parallel to the north Kimberly coast.[82] In the early hours of 28 February the tropical low moved inland from King Sound. Heavy rainfall was reported on the Dampier Peninsula east and southeast of Port Hedland, including Telfer and parts of the De Grey catchment.[83] Derby recorded 83 mm (3.3 in) of rain while Camballin received 142 mm (5.6 in) and the aboriginal community of Looma had 105 mm (4.1 in).[84] The tropical low continued moving overland and the BOM issued their final advisory on 28 February.

Tropical Low 21U

Tropical low (Australian scale)
Clockwise vortex
Duration 7 March – 8 March (Out of basin)
Peak intensity 45 km/h (30 mph) (10-min)  1004 hPa (mbar)

On 7 March, the BoM reported that Tropical Low 21U had developed within the Coral Sea, about 1,000 km (620 mi) to the northwest of Yeppoon, Queensland, Australia.[85] During that day, the low tracked eastwards, and gradually intensified. On 8 March it continued eastwards. Later that day, the low moved out of the Australian region, entered theSouth Pacific and was assigned the new designation 12F.

Tropical Low 23U (Cherono)

Tropical low (Australian scale)
Duration 10 March – 14 March (Out of basin)
Peak intensity Winds unknown  1006 hPa (mbar)

On 10 March TCWC Perth reported that Tropical Low 23U, had developed within TCWC Jakarta's area of responsibility about 1,640 km (1,020 mi) to the east of Jakarta, Indonesia.[86][87] Over the next couple of days the low remained slow moving. On 13 March, the low briefly moved into TCWC Perth's area of responsibility, before crossing 90°E and moving out of the Australian region and into the South-West Indian Ocean. It later developed into Tropical Storm Cherono.

Tropical Low 25U

Tropical low (Australian scale)
Tropical storm (SSHWS)
Duration 26 March – 6 April
Peak intensity 55 km/h (35 mph) (10-min)  994 hPa (mbar)

On 26 March TCWC Darwin reported that Tropical Low 25U had developed in the western Arafura Sea, to the north of the Tiwi Islands.[19][88] Over the next few days the system slowly moved around the Arafura Sea, before TCWC Darwin initiated advisories on the low during 30 March as atmospheric convection surrounding the system organised further.[89][90]

Tropical Low 27U

Tropical low (Australian scale)
Clockwise vortex
Duration 26 March – 2 April
Peak intensity Winds unknown  1006 hPa (mbar)

On 26 March, TCWC Perth reported that a weak tropical low had developed about 315 km (195 mi) to the northwest of the Cocos islands. Over the next couple of days the low moved towards the west and briefly moved into the South West Indian Ocean. However, on 2 April, Tropical Low 27U dissipated completely over open waters.

Tropical Cyclone Errol

Category 2 tropical cyclone (Australian scale)
Tropical storm (SSHWS)
Duration 12 April – 18 April
Peak intensity 105 km/h (65 mph) (10-min)  986 hPa (mbar)

During 12 April the Australian Bureau of Meteorology reported that Tropical Low 29U, had developed over the Timor Sea to the south of Timor-Leste.[19][91] Over the next couple of days the system moved southwards towards the Australian state of Kimberly and intensified gradually before it was declared a category 1 tropical cyclone and named Errol by the BoM early on 15 April.[19][91]

Other storms

Lua error in package.lua at line 80: module 'strict' not found.

Season effects

Name Dates active Peak classification Sustained
wind speeds		 Pressure Land areas affected Damages
(AUD)		 Damages
(USD)		 Deaths Refs
Anggrek 28 October — 4 November Tropical low 75 km/h (45 mph) 995 hPa (29.39 inHg) Cocos (Keeling) Islands None None None [16]
Abele 3 — 4 December Category 2 tropical cyclone 95 km/h (60 mph) 987 hPa (29.15 inHg) None None None None [20]
03U 15 December — 20 December Tropical low 65 km/h (40 mph) 989 hPa (29.21 inHg) Western Australia $100 million $101 million None
04U 22 — 24 December Tropical low Not Specified Not Specified None None None None
Tasha 20 — 25 December Category 1 tropical cyclone 75 km/h (45 mph) 993 hPa (29.32 inHg) Queensland Unknown Unknown 1 [nb 1]
06U 29 December — 4 January Tropical low 55 km/h (35 mph) 993 hPa (29.32 inHg) Northern Territory, Western Australia None None None
07U January Tropical low Not Specified Not Specified None None None None
08U January Tropical low Not Specified Not Specified None None None None
Vince 10 — 15 January Category 1 tropical cyclone 75 km/h (45 mph) 986 hPa (29.12 inHg) None None None None
Zelia 13 - 16 January Category 4 severe tropical cyclone 185 km/h (115 mph) 943 hPa (27.85 inHg) None None None None
Anthony 21 — 30 January Category 2 tropical cyclone 100 km/h (65 mph) 984 hPa (29.06 inHg) Queensland Minor Minor None [30]
Bianca 21 — 30 January Category 4 severe tropical cyclone 165 km/h (105 mph) 945 hPa (27.91 inHg) Western Australia Unknown Unknown 2
13U January Tropical low Not Specified Not Specified None None None None
Yasi 31 January - 3 February Category 5 severe tropical cyclone 205 km/h (125 mph) 929 hPa (27.43 inHg) Solomon Islands, Queensland, Northern Territory, South Australia $3.5 billion $3.54 billion 1
15U/14S 8–13 February Tropical low 55 km/h (35 mph) 1,000 hPa (29.53 inHg) None None None None
Dianne 11–22 February Category 3 severe tropical cyclone 130 km/h (80 mph) 965 hPa (28.50 inHg) Western Australia Minimal Minimal None
Carlos 12–27 February Category 3 severe tropical cyclone 120 km/h (75 mph) 968 hPa (28.59 inHg) Northern Territory, Western Australia $16 million $16.2 million None
18U 23–28 February Tropical low 55 km/h (35 mph) 992 hPa (29.29 inHg) None None None None
19U 24 February – Unknown Tropical low Not Specified Not Specified None None None None
20U 26 February – Unknown Tropical low Not Specified Not Specified None None None None
21U 7 – 8 March Tropical low 45 km/h (30 mph) 1,004 hPa (29.65 inHg) None None None None
22U 10 – 15 March Tropical low Not Specified Not Specified None None None None
23U 10 – 14 March Tropical low Not Specified Not Specified None None None None
25U/20S 26 March – 6 April Tropical low 55 km/h (35 mph) 994 hPa (29.35 inHg) None None None None
26U 26 March – 2 April Tropical low Not Specified 1,006 hPa (29.71 inHg) None None None None
27U/08 26 March – 2 April Tropical low Not Specified 1,006 hPa (29.71 inHg) None None None None
28U April – April Tropical low Not Specified Not Specified None None None None
Errol 10 – 20 April Category 2 tropical cyclone 105 km/h (65 mph) 986 hPa (29.12 inHg) Indonesia, Western Australia None None None
Season Aggregates
28 systems 28 October – 20 April 205 km/h (125 mph) 929 hPa (27.44 inHg) $3.6 billion $3.64 billion 4


See also

Notes

  1. ↑ Damage from Tropical Cyclones Tasha and Anthony are not known as they both contributed to the 2010–11 Queensland floods, which caused over A$ 30 billion.

References

  1. ↑ 1.0 1.1 Lua error in package.lua at line 80: module 'strict' not found.
  2. ↑ 2.0 2.1 Lua error in package.lua at line 80: module 'strict' not found.
  3. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  4. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  5. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  6. ↑ 6.0 6.1 6.2 6.3 Lua error in package.lua at line 80: module 'strict' not found.
  7. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  8. ↑ 8.0 8.1 8.2 8.3 8.4 8.5 8.6 Lua error in package.lua at line 80: module 'strict' not found.
  9. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  10. ↑ 10.0 10.1 Lua error in package.lua at line 80: module 'strict' not found.
  11. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  12. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  13. ↑ 13.0 13.1 13.2 Lua error in package.lua at line 80: module 'strict' not found.
  14. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  15. ↑ http://www.tropicalstormrisk.com/docs/TSRAUSForecastMay2010.pdf
  16. ↑ 16.0 16.1 Lua error in package.lua at line 80: module 'strict' not found.
  17. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  18. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  19. ↑ 19.0 19.1 19.2 19.3 19.4 19.5 19.6 Lua error in package.lua at line 80: module 'strict' not found. A guide on how to read the database is available here.
  20. ↑ 20.0 20.1 20.2 20.3 Lua error in package.lua at line 80: module 'strict' not found.
  21. ↑ 21.0 21.1 Lua error in package.lua at line 80: module 'strict' not found.
  22. ↑ 22.0 22.1 22.2 Lua error in package.lua at line 80: module 'strict' not found.
  23. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  24. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  25. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  26. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  27. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  28. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  29. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  30. ↑ 30.00 30.01 30.02 30.03 30.04 30.05 30.06 30.07 30.08 30.09 30.10 30.11 30.12 30.13 Lua error in package.lua at line 80: module 'strict' not found.
  31. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  32. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  33. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  34. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  35. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  36. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  37. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  38. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  39. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  40. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  41. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  42. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  43. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  44. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  45. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  46. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  47. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  48. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  49. ↑ [1]
  50. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  51. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  52. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  53. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  54. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  55. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  56. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  57. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  58. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  59. ↑ 59.0 59.1 Lua error in package.lua at line 80: module 'strict' not found.
  60. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  61. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  62. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  63. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  64. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  65. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  66. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  67. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  68. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  69. ↑ 69.0 69.1 Lua error in package.lua at line 80: module 'strict' not found.
  70. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  71. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  72. ↑ 72.0 72.1 Lua error in package.lua at line 80: module 'strict' not found.
  73. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  74. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  75. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  76. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  77. ↑ 77.0 77.1 Lua error in package.lua at line 80: module 'strict' not found.
  78. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  79. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  80. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  81. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  82. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  83. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  84. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  85. ↑ http://www.webcitation.org/5x0BfmJmR
  86. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  87. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  88. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  89. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  90. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  91. ↑ 91.0 91.1 Lua error in package.lua at line 80: module 'strict' not found.

External links

Retrieved from "https://infogalactic.com/w/index.php?title=2010–11_Australian_region_cyclone_season&oldid=714183265"