|There is a Wikipedia Book on 3D printing|
|Part of a series on the|
|History of printing|
3D printing, also known as additive manufacturing (AM), refers to various processes used to synthesize a three-dimensional object. In 3D printing, successive layers of material are formed under computer control to create an object. These objects can be of almost any shape or geometry, and are produced from a 3D model or other electronic data source. A 3D printer is a type of industrial robot.
Futurologists such as Jeremy Rifkin  believe that 3D printing signals the beginning of a third industrial revolution, succeeding the production line assembly that dominated manufacturing starting in the late 19th century. Using the power of the Internet, it may eventually be possible to send a blueprint of any product to any place in the world to be replicated by a 3D printer with "elemental inks" capable of being combined into any material substance of any desired form.
3D printing in the term's original sense refers to processes that sequentially deposit material onto a powder bed with inkjet printer heads. More recently, the meaning of the term has expanded to encompass a wider variety of techniques such as extrusion and sintering-based processes. Technical standards generally use the term additive manufacturing for this broader sense.
- 1 History
- 2 General principles
- 3 Processes
- 4 Printers
- 5 Manufacturing applications
- 6 Industrial applications
- 7 Sociocultural applications
- 8 Legal aspects
- 9 Impact
- 10 See also
- 11 References
- 12 Further reading
- 13 External links
Terminology and methods
Early Additive Manufacturing (or AM) equipment and materials were developed in the 1980s. In 1981, Hideo Kodama of Nagoya Municipal Industrial Research Institute invented two AM fabricating methods of a three-dimensional plastic model with photo-hardening polymer, where the UV exposure area is controlled by a mask pattern or the scanning fiber transmitter. Then in 1984, Chuck Hull of 3D Systems Corporation developed a prototype system based on a process known as stereolithography, in which layers are added by curing photopolymers with ultraviolet light lasers. Hull defined the process as a "system for generating three-dimensional objects by creating a cross-sectional pattern of the object to be formed," but this had been already invented by Kodama. Hull's contribution is the design of the STL (STereoLithography) file format widely accepted by 3D printing software as well as the digital slicing and infill strategies common to many processes today. The term 3D printing originally referred to a process employing standard and custom inkjet print heads. The technology used by most 3D printers to date—especially hobbyist and consumer-oriented models—is fused deposition modeling, a special application of plastic extrusion.
AM processes for metal sintering or melting (such as selective laser sintering, direct metal laser sintering, and selective laser melting) usually went by their own individual names in the 1980s and 1990s. At the time, nearly all metal working was produced by casting, fabrication, stamping, and machining; although plenty of automation was applied to those technologies (such as by robot welding and CNC), the idea of a tool or head moving through a 3D work envelope transforming a mass of raw material into a desired shape layer by layer was associated by most people only with processes that removed metal (rather than adding it), such as CNC milling, CNC EDM, and many others. But AM-type sintering was beginning to challenge that assumption. By the mid 1990s, new techniques for material deposition were developed at Stanford and Carnegie Mellon University, including microcasting and sprayed materials. Sacrificial and support materials had also become more common, enabling new object geometries.
The umbrella term additive manufacturing gained wider currency in the decade of the 2000s. As the various additive processes matured, it became clear that soon metal removal would no longer be the only metalworking process done under that type of control (a tool or head moving through a 3D work envelope transforming a mass of raw material into a desired shape layer by layer). It was during this decade that the term subtractive manufacturing appeared as a retronym for the large family of machining processes with metal removal as their common theme. However, at the time, the term 3D printing still referred only to the polymer technologies in most minds, and the term AM was likelier to be used in metalworking contexts than among polymer/inkjet/stereolithography enthusiasts. The term subtractive has not replaced the term machining, instead complementing it when a term that covers any removal method is needed.
By the early 2010s, the terms 3D printing and additive manufacturing developed senses in which they were synonymous umbrella terms for all AM technologies. Although this was a departure from their earlier technically narrower senses, it reflects the simple fact that the technologies all share the common theme of sequential-layer material addition/joining throughout a 3D work envelope under automated control. (Other terms that have appeared, which are usually used as AM synonyms (although sometimes as hypernyms), have been desktop manufacturing, rapid manufacturing [as the logical production-level successor to rapid prototyping], and on-demand manufacturing [which echoes on-demand printing in the 2D sense of printing].) The 2010s were the first decade in which metal parts such as engine brackets and large nuts would be grown (either before or instead of machining) in job production rather than obligately being machined from bar stock or plate.
3D printable models may be created with a computer aided design (CAD) package, via a 3D scanner or by a plain digital camera and photogrammetry software. 3D printed models created with CAD results in reduced errors and can be corrected before printing, allowing verification in the design of the object before it is printed.
The manual modeling process of preparing geometric data for 3D computer graphics is similar to plastic arts such as sculpting. 3D scanning is a process of collecting digital data on the shape and appearance of a real object, creating a digital model based on it.
Before printing a 3D model from an STL file, it must first be examined for errors. In fact, most of the CAD softwares produced errors in the STL files: holes, faces normals, self-intersections, noise shells or manifold errors. This step being called "repair", as the original model is needed to be fixed. Generally STLs that have been produced from a model obtained through 3D scanning often have more of these errors. This is due to how 3D scanning works : as it's often point to point acquisition, reconstruction will include errors in most cases.
Once completed, the STL file needs to be processed by a piece of software called a "slicer," which converts the model into a series of thin layers and produces a G-code file containing instructions tailored to a specific type of 3D printer (FDM printers). This G-code file can then be printed with 3D printing client software (which loads the G-code, and uses it to instruct the 3D printer during the 3D printing process).
Printer resolution describes layer thickness and X-Y resolution in dots per inch (dpi) or micrometers (µm). Typical layer thickness is around 100 µm (250 DPI), although some machines can print layers as thin as 16 µm (1,600 DPI). X-Y resolution is comparable to that of laser printers. The particles (3D dots) are around 50 to 100 µm (510 to 250 DPI) in diameter.
Construction of a model with contemporary methods can take anywhere from several hours to several days, depending on the method used and the size and complexity of the model. Additive systems can typically reduce this time to a few hours, although it varies widely depending on the type of machine used and the size and number of models being produced simultaneously.
Traditional techniques like injection moulding can be less expensive for manufacturing polymer products in high quantities, but additive manufacturing can be faster, more flexible and less expensive when producing relatively small quantities of parts. 3D printers give designers and concept development teams the ability to produce parts and concept models using a desktop size printer.
Though the printer-produced resolution is sufficient for many applications, printing a slightly oversized version of the desired object in standard resolution and then removing material with a higher-resolution subtractive process can achieve greater precision.
Some printable polymers such as ABS, allow the surface finish to be smoothed and improved using chemical vapor processes.
Some additive manufacturing techniques are capable of using multiple materials in the course of constructing parts. These techniques are able to print in multiple colors and color combinations simultaneously, and would not necessarily require painting.
Some printing techniques require internal supports to be built for overhanging features during construction. These supports must be mechanically removed or dissolved upon completion of the print.
All of the commercialized metal 3D printers involve cutting the metal component off of the metal substrate after deposition. A new process for the GMAW 3D printing allows for substrate surface modifications to remove aluminum or steel.
Several 3D printing processes have been invented since the late 1970s. The printers were originally large, expensive, and highly limited in what they could produce.
A large number of additive processes are now available. The main differences between processes are in the way layers are deposited to create parts and in the materials that are used. Some methods melt or soften the material to produce the layers, for example. selective laser melting (SLM) or direct metal laser sintering (DMLS), selective laser sintering (SLS), fused deposition modeling (FDM), or fused filament fabrication (FFF), while others cure liquid materials using different sophisticated technologies, such as stereolithography (SLA). With laminated object manufacturing (LOM), thin layers are cut to shape and joined together (e.g., paper, polymer, metal). Each method has its own advantages and drawbacks, which is why some companies offer a choice of powder and polymer for the material used to build the object. Others sometimes use standard, off-the-shelf business paper as the build material to produce a durable prototype. The main considerations in choosing a machine are generally speed, costs of the 3D printer, of the printed prototype, choice and cost of the materials, and color capabilities.
Printers that work directly with metals are generally expensive. However less expensive printers can be used to make a mold, which is then used to make metal parts.
Fused deposition modeling (FDM), derives from automatic polymeric foil hot air welding system, hot-melt glueing and automatic gasket deposition. Such principle has been further developed by S. Scott Crump in the late 1980s and was commercialized in 1990 by Stratasys. After the patent on this technology expired, a large open-source development community developed and both commercial and DIY variants utilizing this type of 3D printer appeared. As a result, the price of this technology has dropped by two orders of magnitude since its creation.
In fused deposition modeling the model or part is produced by extruding small beads of material which harden immediately to form layers. A thermoplastic filament or metal wire that is wound on a coil is unreeled to supply material to an extrusion nozzle head (3D printer extruder). The nozzle head heats the material and turns the flow on and off. Typically stepper motors or servo motors are employed to move the extrusion head and adjust the flow. The printer usually has 3 axes of motion. A computer-aided manufacturing (CAM) software package is used to generate the G-Code that is sent to a microcontroller which controls the motors.
Various polymers are used, including acrylonitrile butadiene styrene (ABS), polycarbonate (PC), polylactic acid (PLA), high density polyethylene (HDPE), PC/ABS, polyphenylsulfone (PPSU) and high impact polystyrene (HIPS). In general, the polymer is in the form of a filament fabricated from virgin resins. There are multiple projects in the open-sourced community aimed at processing post-consumer plastic waste into filament. These involve machines used to shred and extrude the plastic material into filament. Additionally, fluoropolymers such as PTFE tubing are used in the process due to the material's ability to withstand high temperatures. This ability is especially useful in transferring filaments.
FDM is somewhat restricted in the variation of shapes that may be fabricated. For example, FDM usually cannot produce stalactite-like structures, since they would be unsupported during the build. Otherwise, a thin support must be designed into the structure, which can be broken away during finishing. Fused deposition modeling is also referred to as fused filament fabrication (FFF) by companies who do not hold the original patents like Stratasys does.
Binding of granular materials
Another 3D printing approach is the selective fusing of materials in a granular bed. The technique fuses parts of the layer and then moves upward in the working area, adding another layer of granules and repeating the process until the piece has built up. This process uses the unfused media to support overhangs and thin walls in the part being produced, which reduces the need for temporary auxiliary supports for the piece. A laser is typically used to sinter the media into a solid. Examples include selective laser sintering (SLS), with both metals and polymers (e.g., PA, PA-GF, Rigid GF, PEEK, PS, Alumide, Carbonmide, elastomers), and direct metal laser sintering (DMLS).
Selective Laser Sintering (SLS) was developed and patented by Dr. Carl Deckard and Dr. Joseph Beaman at the University of Texas at Austin in the mid-1980s, under sponsorship of DARPA. A similar process was patented without being commercialized by R. F. Housholder in 1979.
Selective laser melting (SLM) does not use sintering for the fusion of powder granules but will completely melt the powder using a high-energy laser to create fully dense materials in a layer-wise method that has mechanical properties similar to those of conventional manufactured metals.
Electron beam melting (EBM) is a similar type of additive manufacturing technology for metal parts (e.g. titanium alloys). EBM manufactures parts by melting metal powder layer by layer with an electron beam in a high vacuum. Unlike metal sintering techniques that operate below melting point, EBM parts are void-free.
Another method consists of an inkjet 3D printing system. The printer creates the model one layer at a time by spreading a layer of powder (plaster, or resins) and printing a binder in the cross-section of the part using an inkjet-like process. This is repeated until every layer has been printed. This technology allows the printing of full color prototypes, overhangs, and elastomer parts. The strength of bonded powder prints can be enhanced with wax or thermoset polymer impregnation.
In some printers, paper can be used as the build material, resulting in a lower cost to print. During the 1990s some companies marketed printers that cut cross sections out of special adhesive coated paper using a carbon dioxide laser and then laminated them together.
In 2005 Mcor Technologies Ltd developed a different process using ordinary sheets of office paper, a tungsten carbide blade to cut the shape, and selective deposition of adhesive and pressure to bond the prototype.
There are also a number of companies selling printers that print laminated objects using thin plastic and metal sheets.
Stereolithography was patented in 1986 by Chuck Hull. Photopolymerization is primarily used in stereolithography (SLA) to produce a solid part from a liquid. This process was a dramatic departure from the "photosculpture" method of François Willème (1830–1905) developed in 1860 and the photopolymerization of Mitsubishi's Matsubara in 1974.
The "photosculpture" method consisted of photographing a subject from a variety of equidistant angles and projecting each photograph onto a screen, where a pantograph was used to trace the outline onto modeling clay. In photo-polymerization, a vat of liquid polymer is exposed to controlled lighting under safelight conditions. The exposed liquid polymer hardens. Polymerization occurs when photopolymers are exposed to light when photopolymers contain chromophores, otherwise, the addition of molecules that are photosensitive are utilized to react with the solution to begin polymerization. Polymerization of monomers lead to cross-linking, which creates a polymer. Through these covalent bonds, the property of the solution is changed. The build plate then moves down in small increments and the liquid polymer is again exposed to light. The process repeats until the model has been built. The liquid polymer is then drained from the vat, leaving the solid model. The EnvisionTEC Perfactory is an example of a DLP rapid prototyping system.
Inkjet printer systems like the Objet PolyJet system spray photopolymer materials onto a build tray in ultra-thin layers (between 16 and 30 µm) until the part is completed. Each photopolymer layer is cured with UV light after it is jetted, producing fully cured models that can be handled and used immediately, without post-curing. The gel-like support material, which is designed to support complicated geometries, is removed by hand and water jetting. It is also suitable for elastomers.
Ultra-small features can be made with the 3D micro-fabrication technique used in multiphoton photopolymerisation. This approach uses a focused laser to trace the desired 3D object into a block of gel. Due to the nonlinear nature of photo excitation, the gel is cured to a solid only in the places where the laser was focused while the remaining gel is then washed away. Feature sizes of under 100 nm are easily produced, as well as complex structures with moving and interlocked parts.
In Mask-image-projection-based stereolithography a 3D digital model is sliced by a set of horizontal planes. Each slice is converted into a two-dimensional mask image. The mask image is then projected onto a photocurable liquid resin surface and light is projected onto the resin to cure it in the shape of the layer. The technique has been used to create objects composed of multiple materials that cure at different rates. In research systems, the light is projected from below, allowing the resin to be quickly spread into uniform thin layers, reducing production time from hours to minutes. Commercially available devices such as Objet Connex apply the resin via small nozzles.
Metal wire processes
Laser-based wirefeed systems, such as Laser Metal Deposition-wire (LMD-w), feed wire through a nozzle that is melted by a laser using inert gas shielding in either an open environment (gas surrounding the laser), or in a sealed chamber. Electron beam freeform fabrication uses an electron beam heat source inside a vacuum chamber.
It is also possible to use conventional gas metal arc welding attached to a 3D stage to 3-D print metals such as steel and aluminum. Low-cost open source RepRap-style 3-D printers have been outfitted with Arduino-based sensors and demonstrated reasonable metallurgical properties from conventional welding wire as feedstock.
This section requires expansion. (August 2015)
As of October 2012, additive manufacturing systems were on the market that ranged from $2,000 to $500,000 in price and were employed in industries including aerospace, architecture, automotive, defense, and medical replacements, among many others. For example, General Electric uses the high-end model to build parts for turbines. Many of these systems are used for rapid prototyping, before mass production methods are employed.
Several projects and companies are making efforts to develop affordable 3D printers for home desktop use. Much of this work has been driven by and targeted at DIY/Maker/enthusiast/early adopter communities, with additional ties to the academic and hacker communities.
RepRap Project is one of the longest running projects in the desktop category. The RepRap project aims to produce a free and open source hardware (FOSH) 3D printer, whose full specifications are released under the GNU General Public License, and which is capable of replicating itself by printing many of its own (plastic) parts to create more machines. RepRaps have already been shown to be able to print circuit boards and metal parts.
Because of the FOSH aims of RepRap, many related projects have used their design for inspiration, creating an ecosystem of related or derivative 3D printers, most of which are also open source designs. The availability of these open source designs means that variants of 3D printers are easy to invent. The quality and complexity of printer designs, however, as well as the quality of kit or finished products, varies greatly from project to project. This rapid development of open source 3D printers is gaining interest in many spheres as it enables hyper-customization and the use of public domain designs to fabricate open source appropriate technology. This technology can also assist initiatives in sustainable development since technologies are easily and economically made from resources available to local communities.
The cost of 3D printers has decreased dramatically since about 2010, with machines that used to cost $20,000 now costing less than $1,000. For instance, as of 2013, several companies and individuals are selling parts to build various RepRap designs, with prices starting at about €400 / US$500. The open source Fab@Home project has developed printers for general use with anything that can be squirted through a nozzle, from chocolate to silicone sealant and chemical reactants. Printers following the project's designs have been available from suppliers in kits or in pre-assembled form since 2012 at prices in the US$2000 range. The Kickstarter funded Peachy Printer is designed to cost $100 and several other new 3D printers are aimed at the small, inexpensive market including the mUVe3D and Lumifold. Rapide 3D has designed a professional grade crowdsourced 3D-printer costing $1499 which has no fumes nor constant rattle during use. The 3Doodler, "3D printing pen", raised $2.3 million on Kickstarter with the pens selling at $99, though the 3D Doodler has been criticized for being more of a crafting pen than a 3D printer.
As the costs of 3D printers have come down they are becoming more appealing financially to use for self-manufacturing of personal products. In addition, 3D printing products at home may reduce the environmental impacts of manufacturing by reducing material use and distribution impacts.
In addition, several RecycleBots such as the commercialized Filastruder have been designed and fabricated to convert waste plastic, such as shampoo containers and milk jugs, into inexpensive RepRap filament. There is some evidence that using this approach of distributed recycling is better for the environment.
The development and hyper-customization of the RepRap-based 3D printers has produced a new category of printers suitable for small business and consumer use. Manufacturers such as Solidoodle, Robo 3D, RepRapPro and Pirx 3D have introduced models and kits priced at less than $1,000, thousands less than they were in September 2012. Depending on the application, the print resolution and speed of manufacturing lies somewhere between a personal printer and an industrial printer. A list of printers with pricing and other information is maintained. Most recently delta robots, like the TripodMaker, have been utilized for 3D printing to increase fabrication speed further. For delta 3D printers, due to its geometry and differentiation movements, the accuracy of the print depends on the position of the printer head.
Some companies are also offering software for 3D printing, as a support for hardware manufactured by other companies.
Large 3D printers
Large 3D printers have been developed for industrial, education, and demonstrative uses. A large delta-style 3D printer was built in 2014 by SeeMeCNC. The printer is capable of making an object with diameter of up to 4 feet (1.2 m) and up to 10 feet (3.0 m) in height. It also uses plastic pellets as the raw material instead of the typical plastic filaments used in other 3D printers.
Another type of large printer is Big Area Additive Manufacturing (BAAM). The goal is to develop printers that can produce a large object in high speed. A BAAM machine of Cincinnati Incorporated can produce an object at the speeds 200-500 times faster than typical 3D printers available in 2014. Another BAAM machine is being developed by Lockheed Martin with an aim to print long objects of up to 100 feet (30 m) to be used in aerospace industries.
Microscale and nanoscale 3D printing
Microelectronic device fabrication methods can be employed to perform the 3D printing of nanoscale-size objects. Such printed objects are typically grown on a solid substrate, e.g. silicon wafer, to which they adhere after printing as they're too small and fragile to be manipulated post-construction.
In one technique, 3D nanostructures can be printed by physically moving a dynamic stencil mask during the material deposition process, somewhat analogous to the extrusion method of traditional 3D printers. Programmable-height nanostructures with resolutions as small as 10 nm have been produced in this fashion, by metallic physical vapor deposition through a piezo-actuator controlled stencil mask having a milled nanopore in a silicon nitride membrane.
Another method enhances the photopolymerization process on a much smaller scale, using finely-focused lasers controlled by adjustable mirrors. This method has produced objects with feature resolutions of 100 nm.
Three-dimensional printing makes it as cheap to create single items as it is to produce thousands and thus undermines economies of scale. It may have as profound an impact on the world as the coming of the factory did....Just as nobody could have predicted the impact of the steam engine in 1750—or the printing press in 1450, or the transistor in 1950—it is impossible to foresee the long-term impact of 3D printing. But the technology is coming, and it is likely to disrupt every field it touches.
AM technologies found applications starting in the 1980s in product development, data visualization, rapid prototyping, and specialized manufacturing. Their expansion into production (job production, mass production, and distributed manufacturing) has been under development in the decades since. Industrial production roles within the metalworking industries achieved significant scale for the first time in the early 2010s. Since the start of the 21st century there has been a large growth in the sales of AM machines, and their price has dropped substantially. According to Wohlers Associates, a consultancy, the market for 3D printers and services was worth $2.2 billion worldwide in 2012, up 29% from 2011. There are many applications for AM technologies, including architecture, construction (AEC), industrial design, automotive, aerospace, military, engineering, dental and medical industries, biotech (human tissue replacement), fashion, footwear, jewelry, eyewear, education, geographic information systems, food, and many other fields.
Additive manufacturing's earliest applications have been on the toolroom end of the manufacturing spectrum. For example, rapid prototyping was one of the earliest additive variants, and its mission was to reduce the lead time and cost of developing prototypes of new parts and devices, which was earlier only done with subtractive toolroom methods such as cnc milling and turning, and precision grinding, far more accurate than 3d printing with accuracy down to 0.00005" and creating better quality parts faster, but sometimes too expensive for low accuracy prototype parts. With technological advances in additive manufacturing, however, and the dissemination of those advances into the business world, additive methods are moving ever further into the production end of manufacturing in creative and sometimes unexpected ways. Parts that were formerly the sole province of subtractive methods can now in some cases be made more profitably via additive ones. In addition, new developments in RepRap technology allow the same device to perform both additive and subtractive manufacturing by swapping magnetic-mounted tool heads.
Cloud-based additive manufacturing
Additive manufacturing in combination with cloud computing technologies allows decentralized and geographically independent distributed production. Cloud-based additive manufacturing refers to a service-oriented networked manufacturing model in which service consumers are able to build parts through Infrastructure-as-a-Service (IaaS), Platform-as-a-Service (PaaS), Hardware-as-a-Service (HaaS), and Software-as-a-Service (SaaS). Distributed manufacturing as such is carried out by some enterprises; there is also a services like 3D Hubs that put people needing 3D printing in contact with owners of printers.
Some companies offer on-line 3D printing services to both commercial and private customers, working from 3D designs uploaded to the company website. 3D-printed designs are either shipped to the customer or picked up from the service provider.
Companies have created services where consumers can customize objects using simplified web based customisation software, and order the resulting items as 3D printed unique objects. This now allows consumers to create custom cases for their mobile phones. Nokia has released the 3D designs for its case so that owners can customize their own case and have it 3D printed.
Advances in RP technology have introduced materials that are appropriate for final manufacture, which has in turn introduced the possibility of directly manufacturing finished components. One advantage of 3D printing for rapid manufacturing lies in the relatively inexpensive production of small numbers of parts.
Rapid manufacturing is a new method of manufacturing and many of its processes remain unproven. 3D printing is now entering the field of rapid manufacturing and was identified as a "next level" technology by many experts in a 2009 report. One of the most promising processes looks to be the adaptation of selective laser sintering (SLS), or direct metal laser sintering (DMLS) some of the better-established rapid prototyping methods. As of 2006[update], however, these techniques were still very much in their infancy, with many obstacles to be overcome before RM could be considered a realistic manufacturing method. ,l,/.
Industrial 3D printers have existed since the early 1980s and have been used extensively for rapid prototyping and research purposes. These are generally larger machines that use proprietary powdered metals, casting media (e.g. sand), plastics, paper or cartridges, and are used for rapid prototyping by universities and commercial companies.
3D printing can be particularly useful in research labs due to its ability to make specialized, bespoke geometries. In 2012 a proof of principle project at the University of Glasgow, UK, showed that it is possible to use 3D printing techniques to assist in the production of chemical compounds. They first printed chemical reaction vessels, then used the printer to deposit reactants into them. They have produced new compounds to verify the validity of the process, but have not pursued anything with a particular application.
Cornell Creative Machines Lab announced in 2012 that it was possible to produce customized food with 3D Hydrocolloid Printing. Additive manufacturing of food is currently being developed by squeezing out food, layer by layer, into three-dimensional objects. A large variety of foods are appropriate candidates, such as chocolate and candy, and flat foods such as crackers, pasta, and pizza. NASA has considered the versatility of the concept, awarding a contract to the Systems and Materials Research Consultancy to study the feasibility of printing food in space. One of the problem with food printing is the nature of the texture of a food. For example, foods that are not strong enough to be filed are not appropriate for 3D printing for now.
Professor Leroy Cronin of Glasgow University proposed in a 2012 TED Talk that it was possible to use chemical inks to print medicine. Similarly, 3D printing has been considered as a method of implanting stem cells capable of generating new tissues and organs in living humans.
3D printing has entered the world of clothing with fashion designers experimenting with 3D-printed bikinis, shoes, and dresses. In commercial production Nike is using 3D printing to prototype and manufacture the 2012 Vapor Laser Talon football shoe for players of American football, and New Balance is 3D manufacturing custom-fit shoes for athletes.
3D printing has come to the point where companies are printing consumer grade eyewear with on-demand custom fit and styling (although they cannot print the lenses). On-demand customization of glasses is possible with rapid prototyping.
However, comment has been made in academic circles as to the potential limitation of the human acceptance of such mass customised apparel items due to the potential reduction of brand value communication.
In early 2014, the Swedish supercar manufacturer, Koenigsegg, announced the One:1, a supercar that utilizes many components that were 3D printed. In the limited run of vehicles Koenigsegg produces, the One:1 has side-mirror internals, air ducts, titanium exhaust components, and even complete turbocharger assemblies that have been 3D printed as part of the manufacturing process.
Urbee is the name of the first car in the world car mounted using the technology 3D printing (his bodywork and his car windows were "printed"). Created in 2010 through the partnership between the US engineering group Kor Ecologic and the company Stratasys (manufacturer of printers Stratasys 3D), it is a hybrid vehicle with futuristic look.
3D printing is also being utilized by air forces to print spare parts for planes. In 2015, a Royal Air Force Eurofighter Typhoon fighter jet flew with printed parts. The United States Air Force has begun to work with 3D printers, and the Israeli Air Force has also purchased a 3D printer to print spare parts.
Until recent years models were built by hand, often taking a long time. Thus, architects are often forced to show their clients drawings of their projects. According to Erik Kinipper, clients usually need to see the product from all possible viewpoints in space to get a clearer picture of the design and make an informed decision. In order to get these scale models to clients in a small amount of time, architects and architecture firms tend to rely on 3D printing. Using 3D printing, these firms can reduce lead times of production by 50 to 80 percent, producing scale models up to 60 percent lighter than the machined part while being sturdy. Thus, the designs and the models are only limited by a person's imagination.
The improvements on accuracy, speed and quality of materials in 3D printing technology have opened new doors for it to move beyond the use of 3D printing in the modeling process and actually move it to manufacturing strategy. A good example is Dr. Behrokh Khoshnevis’ research at the University of Southern California which resulted in a 3D printer that can build a house in 24 hours .The process is called Contour Crafting. Khoshnevis, Russell, Kwon, & Bukkapatnam, define contour crafting as an additive manufacturing process which uses computer controlled systems to repeatedly lay down layers of materials such as concrete. Bushey also discussed Khoshnevis's robot which comes equipped with a nozzle that spews out concrete and can build a home based on a set computer pattern. Contour Crafting technology has great potential for automating the construction of whole structures as well as sub-components. Using this process, a single house or a colony of houses, each with possibly a different design, may be automatically constructed in a single run, embedded in each house all the conduits for electrical, plumbing and air-conditioning.
In 2012, the US-based group Defense Distributed disclosed plans to "[design] a working plastic gun that could be downloaded and reproduced by anybody with a 3D printer." Defense Distributed has also designed a 3D printable AR-15 type rifle lower receiver (capable of lasting more than 650 rounds) and a 30 round M16 magazine The AR-15 has multiple receivers (both an upper and lower receiver), but the legally controlled part is the one that is serialized (the lower, in the AR-15's case). Soon after Defense Distributed succeeded in designing the first working blueprint to produce a plastic gun with a 3D printer in May 2013, the United States Department of State demanded that they remove the instructions from their website. After Defense Distributed released their plans, questions were raised regarding the effects that 3D printing and widespread consumer-level CNC machining may have on gun control effectiveness.
In 2014, a man from Japan became the first person in the world to be imprisoned for making 3D printed firearms. Yoshitomo Imura posted videos and blueprints of the gun online and was sentenced to jail for two years. Police found at least two guns in his household that were capable of firing bullets.
This section is outdated.(February 2015)
3D printing has been used to print patient specific implant and device for medical use. Successful operations include a titanium pelvis implanted into a British patient, titanium lower jaw transplanted to a Belgian patient, and a plastic tracheal splint for an American infant. The hearing aid and dental industries are expected to be the biggest area of future development using the custom 3D printing technology. In March 2014, surgeons in Swansea used 3D printed parts to rebuild the face of a motorcyclist who had been seriously injured in a road accident. Research is also being conducted on methods to bio-print replacements for lost tissue due to arthritis and cancer.
The things we are printing are becoming more personal and intimate overtime. This is especially true even in medicine: increasingly, what we are printing is ourselves. 3D printing is a great technological advancement in the medical field. 3D printing technology can now be used to make exact replicas of organs. Doctors can use these to plan out surgeries a lot more accurately. While, medical students may even be able to perform practice operations. The printer uses images from patients' MRI or CT scan images as a template and lays down layers of rubber or plastic. These types of procedures are becoming more and more common among doctors and medical researchers everywhere. Many have begun to use 3D printing in order to accurately undergo surgical procedures. This helps that may have been considered inoperable before have the opportunity to have a successful surgery. The hope is that these printers will eventually be able to produce actual organs that can be transplanted into patients by replacing the rubber and plastic printer "ink" with human cells. "The printer and software usually cost in the range of $100,000." Which happens to be less than a CT scan or MRI setup. Rader said "He predicts that interest in the technology will continue to grow as research shows how using simulated organs leads to better surgical outcomes and shorter operating times." This will also help the patients feel at ease as they can be provided with a live model to better explain surgical procedures and put the patient at ease.
In October 24, 2014, a five-year-old girl born without fully formed fingers on her left hand became the first child in the UK to have a prosthetic hand made with 3D printing technology. Her hand was designed by US-based E-nable, an open source design organisation which uses a network of volunteers to design and make prosthetics mainly for children. The prosthetic hand was based on a plaster cast made by her parents. A boy named Alex was also born with a missing arm from just above the elbow. The team was able to use 3D printing to upload an e-NABLE Myoelectric arm that runs off of servos and batteries that are actuated by the electromyography muscle. With the use of 3D printers, E-NABLE has so far distributed more than 400 plastic hands to children.
Printed prosthetics have been used in rehabilitation of crippled animals. In 2013, a 3D printed foot let a crippled duckling walk again. In 2014 a chihuahua born without front legs was fitted with a harness and wheels created with a 3D printer. 3D printed hermit crab shells let hermit crabs inhabit a new style home. A prosthetic beak was another tool developed by the use of 3D printing to help aid a bald eagle named Beauty, whose beak was severely mutilated from a shot in the face. Since 2014, commercially available titanium knee implants made with 3D printer for dogs have been used to restore the animal mobility. Over 10,000 dogs in Europe and United States have been treated after only one year.
In February 2015, FDA approved the marketing of a surgical bolt which facilitates less-invasive foot surgery and eliminates the need to drill through bone. The 3D printed titanium device, 'FastForward Bone Tether Plate' is approved to use in correction surgery to treat bunion.
As of 2012[update], 3D bio-printing technology has been studied by biotechnology firms and academia for possible use in tissue engineering applications in which organs and body parts are built using inkjet techniques. In this process, layers of living cells are deposited onto a gel medium or sugar matrix and slowly built up to form three-dimensional structures including vascular systems. The first production system for 3D tissue printing was delivered in 2009, based on NovoGen bioprinting technology. Several terms have been used to refer to this field of research: organ printing, bio-printing, body part printing, and computer-aided tissue engineering, among others. The possibility of using 3D tissue printing to create soft tissue architectures for reconstructive surgery is also being explored.
In 2013, Chinese scientists began printing ears, livers and kidneys, with living tissue. Researchers in China have been able to successfully print human organs using specialized 3D bio printers that use living cells instead of plastic. Researchers at Hangzhou Dianzi University designed the "3D bio printer" dubbed the "Regenovo". Xu Mingen, Regenovo's developer, said that it takes the printer under an hour to produce either a mini liver sample or a four to five inch ear cartilage sample. Xu also predicted that fully functional printed organs may be possible within the next ten to twenty years. In the same year, researchers at the University of Hasselt, in Belgium had successfully printed a new jawbone for an 83-year-old Belgian woman.
The first pill manufactured by 3D printing was approved by the FDA in August 2015. Binder-jetting into a powder bed of the drug allows very porous pills to be produced, which enables high drug doses in a single pill which dissolves quickly and can be ingested easily. This has been demonstrated for Spritam, a reformulation of levetiracetam for the treatment of epilepsy.
Computers and robots
3D printing can also be used to make laptops and other computers and cases. For example, Novena and VIA OpenBook standard laptop cases. I.e. a Novena motherboard can be bought and be used in a printed VIA OpenBook case.
Open-source robots are built using 3D printers. Double Robotics grant access to their technology (an open SDK). On the other hand, 3&DBot is an Arduino 3D printer-robot with wheels and ODOI is a 3D printed humanoid robot.
The Zero-G Printer, the first 3D printer designed to operate in zero gravity, was built under a joint partnership between NASA Marshall Space Flight Center (MSFC) and Made In Space, Inc. In September 2014, SpaceX delivered the zero-gravity 3D printer to the International Space Station (ISS). On December 19, 2014, NASA emailed CAD drawings for a socket wrench to astronauts aboard the ISS, who then printed the tool using its 3D printer. Applications for space offer the ability to print parts or tools on-site, as opposed to using rockets to bring along pre-manufactured items for space missions to human colonies on the moon, Mars, or elsewhere. The European Space Agency plans to deliver its new Portable On-Board 3D Printer (POP3D for short) to the International Space Station by June 2015, making it the second 3D printer in space.
Furthermore, the Sinterhab project is researching a lunar base constructed by 3D printing using lunar regolith as a base material. Instead of adding a binding agent to the regolith, researchers are experimenting with microwave sintering to create solid blocks from the raw material.
In 2005, a rapidly expanding hobbyist and home-use market was established with the inauguration of the open-source RepRap and Fab@Home projects. Virtually all home-use 3D printers released to-date have their technical roots in the ongoing RepRap Project and associated open-source software initiatives. In distributed manufacturing, one study has found that 3D printing could become a mass market product enabling consumers to save money associated with purchasing common household objects. For example, instead of going to a store to buy an object made in a factory by injection molding (such as a measuring cup or a funnel), a person might instead print it at home from a downloaded 3D model.
In 2005, academic journals had begun to report on the possible artistic applications of 3D printing technology. By 2007 the mass media followed with an article in the Wall Street Journal and Time Magazine, listing a 3D printed design among their 100 most influential designs of the year. During the 2011 London Design Festival, an installation, curated by Murray Moss and focused on 3D Printing, was held in the Victoria and Albert Museum (the V&A). The installation was called Industrial Revolution 2.0: How the Material World will Newly Materialize.
Some of the recent developments in 3D printing were revealed at the 3DPrintshow in London, which took place in November 2013 and 2014. The art section had in exposition artworks made with 3D printed plastic and metal. Several artists such as Joshua Harker, Davide Prete, Sophie Kahn, Helena Lukasova, Foteini Setaki showed how 3D printing can modify aesthetic and art processes. One part of the show focused on ways in which 3D printing can advance the medical field. The underlying theme of these advances was that these printers can be used to create parts that are printed with specifications to meet each individual. This makes the process safer and more efficient. One of these advances is the use of 3D printers to produce casts that are created to mimic the bones that they are supporting. These custom-fitted casts are open, which allow the wearer to scratch any itches and also wash the damaged area. Being open also allows for open ventilation. One of the best features is that they can be recycled to create more casts.
The use of 3D scanning technologies allows the replication of real objects without the use of moulding techniques that in many cases can be more expensive, more difficult, or too invasive to be performed, particularly for precious or delicate cultural heritage artifacts where direct contact with the moulding substances could harm the original object's surface.
Critical making refers to the hands on productive activities that link digital technologies to society. It is invented to bridge the gap between creative physical and conceptual exploration. The term was popularized by Matt Ratto, an Assistant Professor and director of the Critical Making lab in the Faculty of Information at the University of Toronto. Ratto describes one of the main goals of critical as "to use material forms of engagement with technologies to supplement and extend critical reflection and, in doing so, to reconnect our lived experiences with technologies to social and conceptual critique". The main focus of critical making is open design, which includes, in addition to 3D printing technologies, also other digital software and hardware. People usually reference spectacular design when explaining critical making.
Employing additive layer technology offered by 3D printing, Terahertz devices which act as waveguides, couplers and bends have been created. The complex shape of these devices could not be achieved using conventional fabrication techniques. Commercially available professional grade printer EDEN 260V was used to create structures with minimum feature size of 100 µm. The printed structures were later DC sputter coated with gold (or any other metal) to create a Terahertz Plasmonic Device.
As of 2012, domestic 3D printing was mainly practiced by hobbyists and enthusiasts. However, little was used for practical household applications, for example, ornamental objects. Some practical examples include a working clock and gears printed for home woodworking machines among other purposes. Web sites associated with home 3D printing tended to include backscratchers, coat hooks, door knobs, etc.
The open source Fab@Home project has developed printers for general use. They have been used in research environments to produce chemical compounds with 3D printing technology, including new ones, initially without immediate application as proof of principle. The printer can print with anything that can be dispensed from a syringe as liquid or paste. The developers of the chemical application envisage both industrial and domestic use for this technology, including enabling users in remote locations to be able to produce their own medicine or household chemicals.
3D printing is now working its way into households, and more and more children are being introduced to the concept of 3D printing at earlier ages. The prospects of 3D printing are growing, and as more people have access to this new innovation, new uses in households will emerge.
Education and research
3D printing, and open source RepRap 3D printers in particular, are the latest technology making inroads into the classroom. 3D printing allows students to create prototypes of items without the use of expensive tooling required in subtractive methods. Students design and produce actual models they can hold. The classroom environment allows students to learn and employ new applications for 3D printing. RepRaps, for example, have already been used for an educational mobile robotics platform.
Some authors have claimed that RepRap 3D printers offer an unprecedented "revolution" in STEM education. The evidence for such claims comes from both the low cost ability for rapid prototyping in the classroom by students, but also the fabrication of low-cost high-quality scientific equipment from open hardware designs forming open-source labs. Engineering and design principles are explored as well as architectural planning. Students recreate duplicates of museum items such as fossils and historical artifacts for study in the classroom without possibly damaging sensitive collections. Other students interested in graphic designing can construct models with complex working parts. 3D printing gives students a new perspective with topographic maps. Science students can study cross-sections of internal organs of the human body and other biological specimens. And chemistry students can explore 3D models of molecules and the relationship within chemical compounds.
According to a recent paper by Kostakis et al., 3D printing and design can electrify various literacies and creative capacities of children in accordance with the spirit of the interconnected, information-based world.
In Bahrain, large-scale 3D printing using a sandstone-like material has been used to create unique coral-shaped structures, which encourage coral polyps to colonize and regenerate damaged reefs. These structures have a much more natural shape than other structures used to create artificial reefs, and, unlike concrete, are neither acid nor alkaline with neutral pH.
In the last several years 3D printing has been intensively used by in the cultural heritage field for preservation, restoration and dissemination purposes. Many Europeans and North American Museums have purchased 3D printers and actively recreate missing pieceс of their of relics.
The Metropolitan Museum of Art and the British Museum have started using their 3D printers to create museum souvenirs that are available in the museum shops. Other museums, like the National Museum of Military History and Varna Historical Museum, have gone further and sell through the online platform Threeding digital models of their artifacts in 3D printing friendly file format, which everyone can 3D print at home.
Consumer grade 3D printing has resulted in new materials that have been developed specifically for 3D printers. For example, filament materials have been developed to imitate wood, in its appearance as well as its texture. Furthermore, new technologies, such as infusing carbon fiber into printable plastics, allowing for a stronger, lighter material. In addition to new structural materials that have been developed due to 3D printing, new technologies have allowed for patterns to be applied directly to 3D printed parts. Iron oxide-free Portland cement powder has been used to create architectural structures up to 9 feet in height.
3D printing has existed for decades within certain manufacturing industries where many legal regimes, including patents, industrial design rights, copyright, and trademark may apply. However, there is not much jurisprudence to say how these laws will apply if 3D printers become mainstream and individuals and hobbyist communities begin manufacturing items for personal use, for non-profit distribution, or for sale.
Any of the mentioned legal regimes may prohibit the distribution of the designs used in 3D printing, or the distribution or sale of the printed item. To be allowed to do these things, where an active intellectual property was involved, a person would have to contact the owner and ask for a licence, which may come with conditions and a price. However, many patent, design and copyright laws contain a standard limitation or exception for 'private', 'non-commercial' use of inventions, designs or works of art protected under intellectual property (IP). That standard limitation or exception may leave such private, non-commercial uses outside the scope of IP rights.
Patents cover inventions including processes, machines, manufactures, and compositions of matter and have a finite duration which varies between countries, but generally 20 years from the date of application. Therefore, if a type of wheel is patented, printing, using, or selling such a wheel could be an infringement of the patent.
Copyright covers an expression in a tangible, fixed medium and often lasts for the life of the author plus 70 years thereafter. If someone makes a statue, they may have copyright on the look of that statue, so if someone sees that statue, they cannot then distribute designs to print an identical or similar statue.
When a feature has both artistic (copyrightable) and functional (patentable) merits, when the question has appeared in US court, the courts have often held the feature is not copyrightable unless it can be separated from the functional aspects of the item. In other countries the law and the courts may apply a different approach allowing, for example, the design of a useful device to be registered (as a whole) as an industrial design on the understanding that, in case of unauthorized copying, only the non-functional features may be claimed under design law whereas any technical features could only be claimed if covered by a valid patent.
Gun legislation and administration
The US Department of Homeland Security and the Joint Regional Intelligence Center released a memo stating that "significant advances in three-dimensional (3D) printing capabilities, availability of free digital 3D printable files for firearms components, and difficulty regulating file sharing may present public safety risks from unqualified gun seekers who obtain or manufacture 3D printed guns," and that "proposed legislation to ban 3D printing of weapons may deter, but cannot completely prevent their production. Even if the practice is prohibited by new legislation, online distribution of these 3D printable files will be as difficult to control as any other illegally traded music, movie or software files."
Internationally, where gun controls are generally stricter than in the United States, some commentators have said the impact may be more strongly felt, as alternative firearms are not as easily obtainable. European officials have noted that producing a 3D printed gun would be illegal under their gun control laws, and that criminals have access to other sources of weapons, but noted that as the technology improved the risks of an effect would increase. Downloads of the plans from the UK, Germany, Spain, and Brazil were heavy.
Attempting to restrict the distribution over the Internet of gun plans has been likened to the futility of preventing the widespread distribution of DeCSS which enabled DVD ripping. After the US government had Defense Distributed take down the plans, they were still widely available via The Pirate Bay and other file sharing sites. Some US legislators have proposed regulations on 3D printers, to prevent them being used for printing guns. 3D printing advocates have suggested that such regulations would be futile, could cripple the 3D printing industry, and could infringe on free speech rights, with early pioneer of 3D printing Professor Hod Lipson suggesting that gunpowder could be controlled instead.
Additive manufacturing, starting with today's infancy period, requires manufacturing firms to be flexible, ever-improving users of all available technologies to remain competitive. Advocates of additive manufacturing also predict that this arc of technological development will counter globalization, as end users will do much of their own manufacturing rather than engage in trade to buy products from other people and corporations. The real integration of the newer additive technologies into commercial production, however, is more a matter of complementing traditional subtractive methods rather than displacing them entirely.
Since the 1950s, a number of writers and social commentators have speculated in some depth about the social and cultural changes that might result from the advent of commercially affordable additive manufacturing technology. Amongst the more notable ideas to have emerged from these inquiries has been the suggestion that, as more and more 3D printers start to enter people's homes, so the conventional relationship between the home and the workplace might get further eroded. Likewise, it has also been suggested that, as it becomes easier for businesses to transmit designs for new objects around the globe, so the need for high-speed freight services might also become less. Finally, given the ease with which certain objects can now be replicated, it remains to be seen whether changes will be made to current copyright legislation so as to protect intellectual property rights with the new technology widely available.
As 3D printers became more accessible to consumers, online social platforms have developed to support the community. This includes websites that allow users to access information such as how to build a 3D printer, as well as social forums that discuss how to improve 3D print quality and discuss 3D printing news, as well as social media websites that are dedicated to share 3D models. RepRap is a wiki based website that was created to hold all information on 3d printing, and has developed into a community that aims to bring 3D printing to everyone. Furthermore, there are other sites such as Pinshape, Thingiverse and MyMiniFactory, which was created initially to allow users to post 3D files for anyone to print, allowing for decreased transaction cost of sharing 3D files. These websites have allowed for greater social interaction between users, creating communities dedicated around 3D printing.
Some  call attention to the conjunction of Commons-based peer production with 3D printing and other low-cost manufacturing techniques. The self-reinforced fantasy of a system of eternal growth can be overcome with the development of economies of scope, and here, the civil society can play an important role contributing to the raising of the whole productive structure to a higher plateau of more sustainable and customized productivity. Further, it is true that many issues, problems and threats rise due to the large democratization of the means of production, and especially regarding the physical ones. For instance, the recyclability of advanced nanomaterials is still questioned; weapons manufacturing could become easier; not to mention the implications on counterfeiting  and on IP. It might be maintained that in contrast to the industrial paradigm whose competitive dynamics were about economies of scale, Commons-based peer production and 3D printing could develop economies of scope. While the advantages of scale rest on cheap global transportation, the economies of scope share infrastructure costs (intangible and tangible productive resources), taking advantage of the capabilities of the fabrication tools. And following Neil Gershenfeld  in that "some of the least developed parts of the world need some of the most advanced technologies", Commons-based peer production and 3D printing may offer the necessary tools for thinking globally but act locally in response to certain problems and needs.
Larry Summers wrote about the "devastating consequences" of 3D printing and other technologies (robots, artificial intelligence, etc.) for those who perform routine tasks. In his view, "already there are more American men on disability insurance than doing production work in manufacturing. And the trends are all in the wrong direction, particularly for the less skilled, as the capacity of capital embodying artificial intelligence to replace white-collar as well as blue-collar work will increase rapidly in the years ahead." Summers recommends more vigorous cooperative efforts to address the "myriad devices" (e.g., tax havens, bank secrecy, money laundering, and regulatory arbitrage) enabling the holders of great wealth to "avoid paying" income and estate taxes, and to make it more difficult to accumulate great fortunes without requiring "great social contributions" in return, including: more vigorous enforcement of anti-monopoly laws, reductions in "excessive" protection for intellectual property, greater encouragement of profit-sharing schemes that may benefit workers and give them a stake in wealth accumulation, strengthening of collective bargaining arrangements, improvements in corporate governance, strengthening of financial regulation to eliminate subsidies to financial activity, easing of land-use restrictions that may cause the real estate of the rich to keep rising in value, better training for young people and retraining for displaced workers, and increased public and private investment in infrastructure development—e.g., in energy production and transportation.
Michael Spence wrote that "Now comes a … powerful, wave of digital technology that is replacing labor in increasingly complex tasks. This process of labor substitution and disintermediation has been underway for some time in service sectors—think of ATMs, online banking, enterprise resource planning, customer relationship management, mobile payment systems, and much more. This revolution is spreading to the production of goods, where robots and 3D printing are displacing labor." In his view, the vast majority of the cost of digital technologies comes at the start, in the design of hardware (e.g. 3D printers) and, more important, in creating the software that enables machines to carry out various tasks. "Once this is achieved, the marginal cost of the hardware is relatively low (and declines as scale rises), and the marginal cost of replicating the software is essentially zero. With a huge potential global market to amortize the upfront fixed costs of design and testing, the incentives to invest [in digital technologies] are compelling." Spence believes that, unlike prior digital technologies, which drove firms to deploy underutilized pools of valuable labor around the world, the motivating force in the current wave of digital technologies "is cost reduction via the replacement of labor." For example, as the cost of 3D printing technology declines, it is "easy to imagine" that production may become "extremely" local and customized. Moreover, production may occur in response to actual demand, not anticipated or forecast demand. Spence believes that labor, no matter how inexpensive, will become a less important asset for growth and employment expansion, with labor-intensive, process-oriented manufacturing becoming less effective, and that re-localization will appear in both developed and developing countries. In his view, production will not disappear, but it will be less labor-intensive, and all countries will eventually need to rebuild their growth models around digital technologies and the human capital supporting their deployment and expansion. Spence writes that "the world we are entering is one in which the most powerful global flows will be ideas and digital capital, not goods, services, and traditional capital. Adapting to this will require shifts in mindsets, policies, investments (especially in human capital), and quite possibly models of employment and distribution."
Forbes investment pundits have predicted that 3D printing may lead to a resurgence of American Manufacturing, citing the small, creative companies that comprise the current industry landscape, and the lack of the necessary complex infrastructure in typical outsource markets.
- List of 3D printer manufacturers
- List of notable 3D printed weapons and parts
- List of common 3D test models
- List of emerging technologies
- 3D printing marketplace
- Additive Manufacturing File Format
- Cloud manufacturing
- Computer numeric control
- Continuous Liquid Interface Production
- Digital modeling and fabrication
- 3D printer extruder
- Laser cutting
- MakerBot Industries
- Magnetically assisted slip casting
- Mass customization
- Milling center
- Modular design
- Molecular assembler
- Open design
- Open source hardware
- Self-replicating machine
- Volumetric printing
- Excell, Jon. "The rise of additive manufacturing". The Engineer. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "3D Printer Technology – Animation of layering". Create It Real. Retrieved 2012-01-31.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Jeremy Rifkin and The Third Industrial Revolution Home Page". Thethirdindustrialrevolution.com. Retrieved 2016-01-04.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "A third industrial revolution". The Economist. 2012-04-21. Retrieved 2016-01-04.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Jane Bird (2012-08-08). "Exploring the 3D printing opportunity". The Financial Times. Retrieved 2012-08-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Hideo Kodama, "A Scheme for Three-Dimensional Display by Automatic Fabrication of Three-Dimensional Model," IEICE TRANSACTIONS on Electronics (Japanese Edition), vol.J64-C, No.4, pp.237–241, April 1981
- Hideo Kodama, "Automatic method for fabricating a three-dimensional plastic model with photo-hardening polymer," Review of Scientific Instruments, Vol. 52, No. 11, pp. 1770–1773, November 1981
- "3D Printing: What You Need to Know". PCMag.com. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Apparatus for Production of Three-Dimensional Objects by Stereolithography (8 August 1984)
- Freedman, David H. "Layer By Layer." Technology Review 115.1 (2012): 50–53. Academic Search Premier. Web. 26 July 2013.
- Amon, C. H.; Beuth, J. L.; Weiss, L. E.; Merz, R.; Prinz, F. B. (1998). "Shape Deposition Manufacturing With Microcasting: Processing, Thermal and Mechanical Issues" (PDF). Journal of Manufacturing Science and Engineering. 120 (3). Retrieved 2014-12-20.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Beck, J.E.; Fritz, B.; Siewiorek, Daniel; Weiss, Lee (1992). "Manufacturing Mechatronics Using Thermal Spray Shape Deposition" (PDF). Proceedings of the 1992 Solid Freeform Fabrication Symposium. Retrieved 2014-12-20.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Prinz, F. B.; Merz, R.; Weiss, Lee (1997). Ikawa, N., ed. Building Parts You Could Not Build Before. Proceedings of the 8th International Conference on Production Engineering. 2-6 Boundary Row, London SE1 8HN, UK: Chapman & Hall. pp. 40–44.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Google Ngram of the term additive manufacturing".<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- GrabCAD, GE jet engine bracket challenge<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Zelinski, Peter (2014-06-02), "How do you make a howitzer less heavy?", Modern Machine Shop<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Lua error in Module:Citation/CS1/Identifiers at line 47: attempt to index field 'wikibase' (a nil value).
- Tech for Trade, 3D4D Challenge
- Lua error in Module:Citation/CS1/Identifiers at line 47: attempt to index field 'wikibase' (a nil value).
- Jacobs, Paul Francis (1992-01-01). Rapid Prototyping & Manufacturing: Fundamentals of Stereolithography. Society of Manufacturing Engineers. ISBN 9780872634251.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "3D solid repair software - Fix STL polygon mesh files – LimitState:FIX". Print.limitstate.com. Retrieved 2016-01-04.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Model Repair Service". Modelrepair.azurewebsites.net. Retrieved 2016-01-04.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Magics, the Most Powerful 3D Printing Software | Software for additive manufacturing". Software.materialise.com. Retrieved 2016-01-04.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "netfabb Cloud Services". Netfabb.com. 2009-05-15. Retrieved 2016-01-04.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "How to repair a 3D scan for printing". Anamarva.com. Retrieved 2016-01-04.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Lua error in Module:Citation/CS1/Identifiers at line 47: attempt to index field 'wikibase' (a nil value).
- "Objet Connex 3D Printers". Objet Printer Solutions. Retrieved 2012-01-31.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Frick, Lindsey. How to Smooth 3D-Printed Parts. Machine Design Magazine, 29 April 2014
- Kraft, Caleb. "Smoothing Out Your 3D Prints With Acetone Vapor". Make. Make. Retrieved 2016-01-05.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Amberlee S. Haselhuhn, Bas Wijnen, Gerald C. Anzalone, Paul G. Sanders, Joshua M. Pearce, In Situ Formation of Substrate Release Mechanisms for Gas Metal Arc Weld Metal 3-D Printing. Journal of Materials Processing Technology. 226, pp. 50–59 (2015) DOI: 10.1016/j.jmatprotec.2015.06.038 10.1016/j.jmatprotec.2015.06.038
- FDM is a proprietary term owned by Stratasys. All 3-D printers that are not Stratasys machines and use a fused filament process are referred to as or fused filament fabrication (FFF).
- Sherman, Lilli Manolis (November 15, 2007). "A whole new dimension – Rich homes can afford 3D printers". The Economist.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Wohlers, Terry. "Factors to Consider When Choosing a 3D Printer (WohlersAssociates.com, Nov/Dec 2005)".<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- www.3ders.org (2012-09-25). "Casting aluminum parts directly from 3D printed PLA parts". 3ders.org. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Affordable 3D Printing with new Selective Heat Sintering (SHS™) technology". blueprinter.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Chee Kai Chua; Kah Fai Leong; Chu Sing Lim (2003). Rapid Prototyping. World Scientific. p. 124. ISBN 978-981-238-117-0.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "PTFE Tubing Benefits & Applications". fluorotherm.com. Fluorotherm Polymers, Inc. Retrieved 17 November 2015.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Frick, Lindsey. Aluminum-powder DMLS-printed part finishes race first. Machine Design Magazine, 3 March 2014
- Deckard, C., "Method and apparatus for producing parts by selective sintering", U.S. Patent 4,863,538, filed October 17, 1986, published September 5, 1989.
- Housholder, R., "Molding Process", U.S. Patent 4,247,508, filed December 3, 1979, published January 27, 1981.
- Hiemenz, Joe. "Rapid prototypes move to metal components (EE Times, 3/9/2007)".<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Rapid Manufacturing by Electron Beam Melting". SMU.edu.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "3D Printer Uses Standard Paper", "Rapid Today", May, 2008
- U.S. Patent 4,575,330
- NSF JTEC/WTEC Panel Report-RPA
- Beaumont Newhall (May 1958) "Photosculpture," Image, 7 (5) : 100–105
- François Willème, "Photo-sculpture," U.S. Patent no. 43,822 (August 9, 1864). Available on-line at: U.S. Patent 43,822
- François Willème (May 15, 1861) "La sculpture photographique", Le Moniteur de la photographie, p. 34.
- "EnvisionTEC Perfactory". EnvisionTEC.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Johnson, R. Colin. "Cheaper avenue to 65 nm? (EE Times, 3/30/2007)".<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "The World's Smallest 3D Printer". TU Wien. 12 September 2011.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "3D-printing multi-material objects in minutes instead of hours". Kurzweil Accelerating Intelligence. November 22, 2013.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Yuenyong Nilsiam, Amberlee Haselhuhn, Bas Wijnen, Paul Sanders, & Joshua M. Pearce. Integrated Voltage - Current Monitoring and Control of Gas Metal Arc Weld Magnetic Ball-Jointed Open Source 3-D Printer.Machines 3(4), 339-351 (2015).
- A. Pinar, B. Wijnen, G. C. Anzalone, T. C. Havens, P. G. Sanders, J. M. Pearce. Low-cost Open-Source Voltage and Current Monitor for Gas Metal Arc Weld 3-D Printing. Journal of Sensors Vol. 2015, Article ID 876714, 8 pages, 2015.
- "3D Printing: Challenges and Opportunities for International Relations". Council on Foreign Relations. October 23, 2013. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Kalish, Jon. "A Space For DIY People To Do Their Business (NPR.org, November 28, 2010)". Retrieved 2012-01-31.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Jones, R., Haufe, P., Sells, E., Iravani, P., Olliver, V., Palmer, C., & Bowyer, A. (2011). Reprap-- the replicating rapid prototyper. Robotica, 29(1), 177-191.
- "Open source 3D printer copies itself". Computerworld New Zealand. 2008-04-07. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- RepRap blog 2009 visited 2/26/2014
- An Inexpensive Way to Print Out Metal Parts – The New York Times
- Gerald C. Anzalone, Chenlong Zhang, Bas Wijnen, Paul G. Sanders and Joshua M. Pearce, " Low-Cost Open-Source 3-D Metal Printing" IEEE Access, 1, pp.803–810, (2013). doi: 10.1109/ACCESS.2013.2293018
- Disruptions: 3-D Printing Is on the Fast Track – NYTimes.com
- www.3ders.org. "3D printers list with prices". 3ders.org. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- New Scientist magazine: Desktop fabricator may kick-start home revolution, 9 January 2007
- "3D printer by Saskatchewan man gets record crowdsourced cash". Saskatchewan: CBC News. 6 November 2013. Retrieved 8 November 2013.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Rapide One – Affordable Professional Desktop 3D Printer by Rapide 3D". Indiegogo. December 2, 2013. Retrieved 20 January 2014.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Pogue, David. "A Review Of The 3Doodler Pen, Which Raised Over $2 Million On Kickstarter". Yahoo Tech. Retrieved 13 March 2014
- Dorrier, Jason. "Kickstarter 3Doodler 3D Printing Pen Nothing of the Sort – But Somehow Raises $2 Million". Singularity Hub. Retrieved 13 March 2014
- Christian Baechler, Matthew DeVuono, and Joshua M. Pearce, "Distributed Recycling of Waste Polymer into RepRap Feedstock". Rapid Prototyping Journal, 19 (2), pp. 118-125 (2013). DOI:10.1108/13552541311302978
- Kreiger, M., Anzalone, G. C., Mulder, M. L., Glover, A., & Pearce, J. M. (2013). Distributed Recycling of Post-Consumer Plastic Waste in Rural Areas. MRS Online Proceedings Library, 1492, mrsf12-1492
- See for example the Rostock
- Vandendriessche, Pieter-Jan. "delta 3D printer accuracy".<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Titsch, Mike (July 11, 2013). "MatterHackers Opens 3D Printing Store and Releases MatterControl 0.7.6". Retrieved November 30, 2013.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Hoosier Daddy – The Largest Delta 3D Printer In the World". 3D Printer World. Punchbowl Media. 23 July 2014. Retrieved 28 September 2014.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- McKenna, Beth (26 April 2014). "The Next Big Thing in 3-D Printing: Big Area Additive Manufacturing, or BAAM". The Motley Fool. Retrieved 28 September 2014.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- patel, Prachi (5 March 2013). "Micro 3-D Printer Creates Tiny Structures in Seconds". MIT Technology Review.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Print me a Stradivarius – How a new manufacturing technology will change the world". Economist Technology. 2011-02-10. Retrieved 2012-01-31.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Zelinski, Peter (2014-06-25). "Video: World's largest additive metal manufacturing plant". Modern Machine Shop.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Sherman, Lilli Manolis. "3D Printers Lead Growth of Rapid Prototyping (Plastics Technology, August 2004)". Retrieved 2012-01-31.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "3D printing: 3D printing scales up". The Economist. 2013-09-07. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Development of a Three-Dimensional Printed, Liquid-Cooled Nozzle for a Hybrid Rocket Motor, Nick Quigley and James Evans Lyne, Journal of Propulsion and Power, Vol. 30, No. 6 (2014), pp. 1726–1727.
- Vincent & Earls 2011
- G. Anzalone, B. Wijnen, Joshua M. Pearce, (2015) "Multi-material additive and subtractive prosumer digital fabrication with a free and open-source convertible delta RepRap 3-D printer", Rapid Prototyping Journal, 21(5), pp.506–519. doi:10.1108/RPJ-09-2014-0113
- Felix Bopp (2010). Future Business Models by Additive Manufacturing. Verlag. ISBN 3-8366-8508-6. Retrieved 4 July 2014.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Wu, D., Thames, J.L., Rosen, D.W., & Schaefer, D. (2013). Enhancing the Product Realization Process with Cloud-Based Design and Manufacturing Systems. Transactions of the ASME, Journal of Computing and Information Science in Engineering (JCISE), 13(4): 041004-041004-14. doi:10.1115/1.4025257
- Wu, D., Rosen, D.W., Wang, L., & Schaefer, D. (2015). Cloud-Based Design and Manufacturing: A New Paradigm in Digital Manufacturing and Design Innovation. Computer-Aided Design, 59(1): 1-14, DOI: 10.1016/j.cad.2014.07.006.
- Wu, D., Rosen, D.W., & Schaefer, D. (2015). Scalability Planning for Cloud-Based Manufacturing Systems. Transactions of the ASME, Journal of Manufacturing Science and Engineering, DOI:10.1115/1.4030266.
- "3D Hubs: Like Airbnb For 3D Printers". gizmodo. Retrieved 2014-07-05.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Sterling, Bruce (2011-06-27). "Spime Watch: Dassault Systèmes' 3DVIA and Sculpteo (Reuters, June 27, 2011)". Wired. Archived from the original on 15 April 2014. Retrieved 2012-01-31.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Vance, Ashlee (2011-01-12). "The Wow Factor of 3-D Printing (The New York Times, January 12, 2011)". Retrieved 2012-01-31.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "The action doll you designed, made real". makie.me. Retrieved January 18, 2013.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Cubify — Express Yourself in 3D". myrobotnation.com. Retrieved 2014-01-25.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Turn Your Baby's Cry Into an iPhone Case". Bloomberg Businessweek. 2012-03-10. Retrieved 2013-02-20.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Nokia backs 3D printing for mobile phone cases". BBC News Online. 2013-02-18. Retrieved 2013-02-20.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Wohlers Report 2009, State of the Industry Annual Worldwide Progress Report on Additive Manufacturing, Wohlers Associates, ISBN 978-0-9754429-5-1
- Hopkinson, N & Dickens, P 2006, 'Emerging Rapid Manufacturing Processes', in Rapid Manufacturing; An industrial revolution for the digital age, Wiley & Sons Ltd, Chichester, W. Sussex
- "Hydrocolloid Printing", Cornell Creative, 2012
- A Guide to All the Food That's Fit to 3D Print (So Far)
- "Foodini 3D Printer Cooks Up Meals Like the Star Trek Food Replicator". Retrieved 27 January 2015.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "3D Printing: Food in Space". NASA. Retrieved 2015-09-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- ted.com, Lee Cronin: Print your own medicine
- "RFA-HD-15-023: Use of 3-D Printers for the Production of Medical Devices (R43/R44)". NIH grants. Retrieved 2015-09-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "3D Printed Clothing Becoming a Reality". Resins Online. 2013-06-17. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Michael Fitzgerald (2013-05-28). "With 3-D Printing, the Shoe Really Fits". MIT Sloan Management Review. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "3D Custom Eyewear The Next Focal Point For 3D Printing". Rakesh Sharma. 2013-09-10. Retrieved 2013-09-10.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Parker C. J. (2015). The Human Acceptance of 3D Printing in Fashion Paradox: Is mass customisation a bridge too far? IWAMA 2015: 5th International Workshop of Advanced Manufacturing and Automation. Shanghai, China.
- "Koenigsegg One:1 Comes With 3D Printed Parts". Business Insider. Retrieved 2014-05-14.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- tecmundo.com.br/ Conheça o Urbee, primeiro carro a ser fabricado com uma impressora 3D
- The "Urbee" 3D-Printed Car: Coast to Coast on 10 Gallons Truthout
- 3D Printed Car Creator Discusses Future of the Urbee
- Simmons, Dan (May 6, 2015). "Airbus had 1,000 parts 3D printed to meet deadline". BBC. Retrieved 2015-11-27.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Zitun, Yoav (July 27, 2015). "The 3D printer revolution comes to the IAF". Ynet News. Retrieved 2015-09-29.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Knippers, E. "Architecture | Leapfrog 3D Printers". www.lpfrg.com. Retrieved 2015-09-29.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Concept Modeling, Realistic 3D Printed Models | Stratasys". www.stratasys.com. Retrieved 2015-09-29.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Greenberg, Andy (2012-08-23). "'Wiki Weapon Project' Aims To Create A Gun Anyone Can 3D-Print At Home". Forbes. Retrieved 2012-08-27.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Poeter, Damon (2012-08-24). "Could a 'Printable Gun' Change the World?". PC Magazine. Retrieved 2012-08-27.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Blueprints for 3-D printer gun pulled off website". statesman.com. May 2013. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Samsel, Aaron. "3D Printers, Meet Othermill: A CNC machine for your home office (VIDEO)". Guns.com. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "The Third Wave, CNC, Stereolithography, and the end of gun control". Popehat. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Rosenwald, Michael S. (2013-02-25). "Weapons made with 3-D printers could test gun-control efforts". Washington Post.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Making guns at home: Ready, print, fire". The Economist. 2013-02-16. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Rayner, Alex (6 May 2013). "3D-printable guns are just the start, says Cody Wilson". The Guardian. London.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Manjoo, Farhad (2013-05-08). "3-D-printed gun: Yes, it will be possible to make weapons with 3-D printers. No, that doesn't make gun control futile". Slate.com. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Franzen, Carl. "3D-printed gun maker in Japan sentenced to two years in prison". The Verge.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Transplant jaw made by 3D printer claimed as first". BBC. 2012-02-06.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Rob Stein (2013-03-17). "Doctors Use 3-D Printing To Help A Baby Breathe". NPR.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Moore, Calen (11 February 2014). "Surgeons have implanted a 3-D-printed pelvis into a U.K. cancer patient". fiercemedicaldevices.com. Retrieved 4 March 2014.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Keith Perry (12 March 2014). "Man makes surgical history after having his shattered face rebuilt using 3D printed parts". London: The Daily Telegraph. Retrieved 12 March 2014.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Research into Julie Williams, 3D-Bioprinting may soon produce transplantable human tissues Mar.6, 2014
- BBC News (October 2014). "Inverness girl Hayley Fraser gets 3D-printed hand", BBC News, 01 October 2014. Retrieved 02 October 2014.
- "3D-Printed Foot Lets Crippled Duck Walk Again".<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Pleasance, Chris (18 August 2014). "Puppy power: Chihuahua born without front legs is given turbo-charged makeover after being fitted with 3D printed body harness and a set of skateboard wheels". The Daily Mail. Retrieved 2014-08-21.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Flaherty, Joseph (2013-07-30). "So Cute: Hermit Crabs Strut in Stylish 3-D Printed Shells". Wired.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Weintraub, Arlene (20 March 2015). "3D Systems preps for global launch of 'printed' knee implants for dogs". fierceanimalhealth
.com. Retrieved 13 April 2015. External link in
- Saxena, Varun (2 February 2015). "FDA clears 3-D printed device for minimally invasive foot surgery". fiercemedicaldevices
.com. Retrieved 14 April 2015. External link in
- "3D-printed sugar network to help grow artificial liver", BBC, 2 July 2012
- "Invetech helps bring bio-printers to life". Australian Life Scientist. Westwick-Farrow Media. December 11, 2009. Retrieved December 31, 2013.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Building body parts with 3D printing", The Engineer, 24 May 2010
- Silverstein, Jonathan. "'Organ Printing' Could Drastically Change Medicine (ABC News, 2006)". Retrieved 2012-01-31.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Dan Thomas, Engineering Ourselves – The Future Potential Power of 3D-Bioprinting?, engineering.com, March 25, 2014
- The Diplomat (2013-08-15). "Chinese Scientists Are 3D Printing Ears and Livers – With Living Tissue". Tech Biz. The Diplomat. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "How do they 3D print kidney in China". Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Mish's Global Economic Trend Analysis: 3D-Printing Spare Human Parts; Ears and Jaws Already, Livers Coming Up ; Need an Organ? Just Print It". Globaleconomicanalysis.blogspot.co.uk. 2013-08-18. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Palmer, Eric (3 August 2015). "Company builds plant for 3DP pill making as it nails first FDA approval". fiercepharmamanufacturing.com. Retrieved 4 August 2015.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- The Almost Completely Open Source Laptop Goes on Sale
- Robots And 3D Printing
- Why to Use 3D Printers and the Best 3D Printers To Build Your Own Robot
- Printoo: Giving Life to Everyday Objects (paper-thin, flexible Arduino-compatible modules)
- 3&DBot: An Arduino 3D printer-robot with wheels
- A lesson in building a custom 3D printed humanoid robot
- "New horizons open with space-based 3D printing". SPIE Newsroom. Retrieved 1 April 2015.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Hays, Brooks (2014-12-19). "NASA just emailed the space station a new socket wrench". Retrieved 2014-12-20.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Brabaw, Kasandra (2015-01-30). "Europe's 1st Zero-Gravity 3D Printer Headed for Space". Retrieved 2015-02-01.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Wood, Anthony (2014-11-17). "POP3D to be Europe's first 3D printer in space". Retrieved 2015-02-01.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Raval, Siddharth (2013-03-29). "SinterHab: A Moon Base Concept from Sintered 3D-Printed Lunar Dust". Space Safety Magazine. Retrieved 2013-10-15.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "The World's First 3D-Printed Building Will Arrive In 2014". TechCrunch. 2012-01-20. Retrieved 2013-02-08.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Diaz, Jesus (2013-01-31). "This Is What the First Lunar Base Could Really Look Like". Gizmodo. Retrieved 2013-02-01.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "The RepRap's Heritage".<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Kelly, Heather (July 31, 2013). "Study: At-home 3D printing could save consumers "thousands"". CNN.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Guth, Robert A. "How 3-D Printing Figures To Turn Web Worlds Real (The Wall Street Journal, December 12, 2007)" (PDF). Retrieved 2012-01-31.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- iPad iPhone Android TIME TV Populist The Page (2008-04-03). "Bathsheba Grossman's Quin.MGX for Materialise listed in Time Magazine's Design 100". Time.com. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Williams, Holly (2011-08-28). "Object lesson: How the world of decorative art is being revolutionised by 3D printing (The Independent, 28 August 2011)". London. Retrieved 2012-01-31.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Bennett, Neil (November 13, 2013). "How 3D printing is helping doctors mend you better". TechAdvisor.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Custom Bobbleheads". Retrieved 13 January 2015.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "3D-print your face in chocolate for that special Valentine's Day gift". The Guardian. 25 January 2013.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Ratto, M. & Ree, R. (2012). "Materializing information: 3D printing and social change". First Monday. 17 (7).<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Ratto, Matt (2011). "Open Design and Critical Making". Open Design Now: Why Design Cannot Remain Exclusive.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- ewilhelm. "3D printed clock and gears". Instructables.com. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- 23/01/2012 (2012-01-23). "Successful Sumpod 3D printing of a herringbone gear". 3d-printer-kit.com. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Search engine for 3D printable models, "backscratcher", etc.
- New Scientist magazine: Make your own drugs with a 3D printer, 17 April 2012
- Cronin, Lee (2012-04-17). "3D printer developed for drugs" (video interview [5:21]). Glasgow University: BBC News Online. Retrieved 2013-03-06.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- D'Aveni, Richard. "3-D Printing Will Change the World". Harvard Business Review. Retrieved October 8, 2014.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "3D printable SLR brings whole new meaning to "digital camera"". Gizmag.com. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Schelly, C., Anzalone, G., Wijnen, B., & Pearce, J. M. (2015). "Open-source 3-D printing Technologies for education: Bringing Additive Manufacturing to the Classroom." Journal of Visual Languages & Computing.
- Grujović, N., Radović, M., Kanjevac, V., Borota, J., Grujović, G., & Divac, D. (2011, September). "3D printing technology in education environment." In 34th International Conference on Production Engineering (pp. 29–30).
- Mercuri, R., & Meredith, K. (2014, March). "An educational venture into 3D Printing." In Integrated STEM Education Conference (ISEC), 2014 IEEE (pp. 1–6). IEEE.
- Students Use 3D Printing to Reconstruct Dinosaurs – YouTube
- Gonzalez-Gomez, J., Valero-Gomez, A., Prieto-Moreno, A., & Abderrahim, M. (2012). "A new open source 3d-printable mobile robotic platform for education." In Advances in Autonomous Mini Robots (pp. 49–62). Springer Berlin Heidelberg.
- J. Irwin, J.M. Pearce, D. Opplinger, and G. Anzalone. The RepRap 3-D Printer Revolution in STEM Education, 121st ASEE Annual Conference and Exposition, Indianapolis, IN. Paper ID #8696 (2014).
- 3D Printing in the Classroom to Accelerate Adoption of Technology. On 3D Printing
- Kostakis, V.; Niaros, V.; Giotitsas, C. (2014): Open source 3D printing as a means of learning: An educational experiment in two high schools in Greece. In: Telematics and Informatics
- Pearce, Joshua M. 2012. "Building Research Equipment with Free, Open-Source Hardware." Science 337 (6100): 1303–1304
- "Underwater City: 3D Printed Reef Restores Bahrain's Marine Life". ptc.com. 2013-08-01. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Museum uses 3D printing to take fragile maquette by Thomas Hart Benton on tour through the States
- British Museum releases scans of artefacts to let you 3D print your own museum at home
- Threeding Uses Artec 3D Scanning Technology to Catalog 3D Models for Bulgaria’s National Museum of Military History
- Eitel, Elisabeth. MarkForged: $5,000 3D printer prints carbon-fiber parts. Machine Design Magazine, 7 March 2014
- "Researchers at UC Berkeley Create Bloom First Ever 3D-printed Cement Structure That Stands 9 Feet Tall". cbs sanfrancisco. 6 March 2015. Retrieved 23 April 2015.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Chino, Mike (9 March 2015). "UC Berkeley unveils 3D-printed "Bloom" building made of powdered cement". Retrieved 23 April 2015.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Fixsen, Anna (6 March 2015). "Print it Real Good: First Powder-Based 3D Printed Cement Structure Unveiled". Retrieved 23 April 2015.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- 3D Printing Technology Insight Report, 2014, patent activity involving 3D-Printing from 1990–2013, accessed 2014-06-10
- Clive Thompson on 3-D Printing's Legal Morass. Wired, Clive Thompson 05.30.12 1:43 PM
- Weinberg, Michael (January 2013). "What's the Deal with copyright and 3D printing?" (PDF). Institute for Emerging Innovation. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Homeland Security bulletin warns 3D-printed guns may be 'impossible' to stop". Fox News. 2013-05-23. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Cochrane, Peter (2013-05-21). "Peter Cochrane's Blog: Beyond 3D Printed Guns". TechRepublic. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Gilani, Nadia (2013-05-06). "Gun factory fears as 3D blueprints put online by Defense Distributed | Metro News". Metro.co.uk. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Liberator: First 3D-printed gun sparks gun control controversy". Digitaljournal.com. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "First 3D Printed Gun 'The Liberator' Successfully Fired". IBTimes UK. 2013-05-07. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "US demands removal of 3D printed gun blueprints". neurope.eu. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "España y EE.UU. lideran las descargas de los planos de la pistola de impresión casera". ElPais.com. 2013-05-09. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Controlled by Guns". Quiet Babylon. 2013-05-07. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "3dprinting". Joncamfield.com. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "State Dept Censors 3D Gun Plans, Citing 'National Security'". News.antiwar.com. 2013-05-10. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Wishful Thinking Is Control Freaks' Last Defense Against 3D-Printed Guns". Reason.com. 2013-05-08. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Lennard, Natasha (2013-05-10). "The Pirate Bay steps in to distribute 3-D gun designs". Salon.com. Archived from the original on 2013-05-19. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Sen. Leland Yee Proposes Regulating Guns From 3-D Printers". CBS Sacramento. 2013-05-08. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Schumer Announces Support For Measure To Make 3D Printed Guns Illegal
- "Four Horsemen of the 3D Printing Apocalypse". Makezine.com. 2011-06-30. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Ball, James (10 May 2013). "US government attempts to stifle 3D-printer gun designs will ultimately fail". The Guardian. London.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Gadgets (2013-01-18). "Like It Or Not, 3D Printing Will Probably Be Legislated". TechCrunch. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Klimas, Liz (2013-02-19). "Engineer: Don't Regulate 3D Printed Guns, Regulate Explosive Gun Powder Instead". TheBlaze.com. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Beckhusen, Robert (2013-02-15). "3-D Printing Pioneer Wants Government to Restrict Gunpowder, Not Printable Guns | Danger Room". Wired.com. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Bump, Philip (2013-05-10). "How Defense Distributed Already Upended the World". The Atlantic Wire. Archived from the original on 2013-05-19. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "News". European Plastics News. Retrieved 2013-10-30.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Albert 2011
- "Confronting a New 'Era of Duplication'? 3D Printing, Replicating Technology and the Search for Authenticity in George O. Smith's Venus Equilateral Series". Durham University. Retrieved July 21, 2013.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Materializing information: 3D printing and social change". Retrieved January 13, 2014.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Additive Manufacturing: A supply chain wide response to economic uncertainty and environmental sustainability" (PDF). Retrieved January 11, 2014.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Materializing information: 3D printing and social change". Retrieved March 30, 2014.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "RepRap Options". Retrieved March 30, 2014.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "3D Printing". Retrieved March 30, 2014.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Thingiverse". Retrieved March 30, 2014.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Kostakis, V. (2013): At the Turning Point of the Current Techno-Economic Paradigm: Commons-Based Peer Production, Desktop Manufacturing and the Role of Civil Society in the Perezian Framework.. In: TripleC, 11(1), 173–190.
- Kostakis, V.; Papachristou, M. (2014): Commons-based peer production and digital fabrication: The case of a RepRap-based, Lego-built 3D printing-milling machine. In: Telematics and Informatics, 31(3), 434–443
- Kostakis, V; Fountouklis, M; Drechsler, W. (2013): Peer Production and Desktop Manufacturing: The Case of the Helix-T Wind Turbine Project.. In: Science, Technology & Human Values, 38(6), 773 – 800.
- Campbell, Thomas, Christopher Williams, Olga Ivanova, and Banning Garrett. (2011): Could 3D Printing Change the World? Technologies, Potential, and Implications of Additive Manufacturing. Washington: Atlantic Council of the United States
- Bradshaw, Simon, Adrian Bowyer, and Patrick Haufe (2010): The Intellectual Property Implications of Low-Cost 3D Printing. In: SCRIPTed 7
- Gershenfeld, Neil (2007): FAB: The Coming Revolution on your Desktop: From Personal Computers to Personal Fabrication. Cambridge: Basic Books, p. 13–14
- Larry Summers, The Inequality Puzzle, Democracy: A Journal of Ideas, Issue #32, Spring 2014
- Michael Spence, Labor's Digital Displacement (2014-05-22), Project Syndicate
- Can 3D Printing Reshape Manufacturing In America?, Forbes.com 17 June 2014, retrieved 11 Aug 2014
- "Results of Make Magazine's 2015 3D Printer Shootout". docs.google.com. Retrieved 1 June 2015.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Evaluation Protocol for Make Magazine's 2015 3D Printer Shootout". makezine.com. Retrieved 1 June 2015.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Vincent; Earls, Alan R. (February 2011). "Origins: A 3D Vision Spawns Stratasys, Inc". Today's Machining World. Oak Forest, Illinois, USA: Screw Machine World Inc. 7 (1): 24–25.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- "Heat Beds in 3D Printing – Advantages and Equipment". Boots Industries. Retrieved 7 September 2015.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Albert, Mark [Editor in Chief] (17 January 2011). "Subtractive plus additive equals more than ( − + +=> ): subtractive and additive processes can be combined to develop innovative manufacturing methods that are superior to conventional methods ['Mark: My Word' column – Editor's Commentary]". Modern Machine Shop. Cincinnati, Ohio, USA: Gardner Publications Inc. 83 (9): 14.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Easton, Thomas A. (November 2008). "The 3D Trainwreck: How 3D Printing Will Shake Up Manufacturing". Analog. 128 (11): 50–63.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
- Wright, Paul K. (2001). 21st Century Manufacturing. New Jersey: Prentice-Hall Inc.
|Wikimedia Commons has media related to 3D printing.|