Aero Spacelines Pregnant Guppy

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Pregnant Guppy
Pregnant Guppy NASA.jpg
The Pregnant Guppy heavy lifter
Role Outsize cargo freight aircraft
Manufacturer Aero Spacelines
First flight September 19, 1962[1]
Retired 1979
Status Scrapped
Primary users Aero Spacelines
NASA
Produced 1
Developed from Boeing 377
Developed into Aero Spacelines Super Guppy

The Aero Spacelines Pregnant Guppy was a large, wide-bodied cargo aircraft built in the United States and used for ferrying outsized cargo items, most notably NASA's components of the Apollo program.[1] The Pregnant Guppy was the first of the Guppy line of aircraft produced by Aero Spacelines.[1] The design also inspired similar designs such as the jet-powered Airbus Beluga, and the Boeing Dreamlifter designed to deliver Boeing 787 parts.

Development

In 1960, U.S. airlines were disposing of their obsolete piston-engined Boeing 377 Stratocruisers in favor of the newer jet-engined airliners. NASA was finding that barge transport of their increasingly large space program components from manufacturers on the West Coast to test and launch sites on the East Coast was slow and expensive. Aircraft broker Leo Mansdorf was stockpiling surplus Stratocruisers at Van Nuys prior to resale, and ex-USAF pilot John M. Conroy realized the potential of these aircraft to transport the large but relatively light rocket components.[1]

Conroy presented his plans for an extensively modified Stratocruiser to NASA, where an official commented that the bloated aircraft resembled a pregnant guppy. Although NASA was lukewarm on the concept, Conroy mortgaged his house and founded Aero Spacelines International in order to build and operate the concept aircraft.[1]

Conversion work was undertaken by On Mark Engineering. The Pregnant Guppy (registered N1024V) was built from an ex-Pan Am airframe with a five-meter section from an ex-British Overseas Airways Corporation aircraft (G-AKGJ) added immediately behind the wing. The wing, engines, tail, nose and cockpit were unchanged, but a new upper fuselage of six meters diameter was added, giving the aircraft a "triple-bubble" appearance in front view. The entire rear section (including tail surfaces) was detachable to allow cargo to be loaded directly into the fuselage.

The aircraft first flew on September 19, 1962, piloted by John M. Conroy and co-pilot Clay Lacy.[2] When Van Nuys traffic control realized that Conroy intended to take off, they notified police and fire departments to be on alert. However the huge aircraft performed flawlessly, the only difference in handling being a slight decrease in speed caused by extra drag of the larger fuselage.

Carrying the S-IV Saturn I rocket stage, the Guppy saved three weeks transit time versus barge,[3] for a cost of $16.00 per mile.[4]

Operational history

In summer 1963, the Pregnant Guppy commenced cargo flights for NASA. Among its early duties was transporting the first and second stages of the Gemini program's Titan II from the Martin Co. in Baltimore, Maryland to Cape Canaveral. As the space program increased through the late 1960s, it became clear that this one aircraft could not carry the whole transport load, and so 25 more Stratocruisers and ex-USAF C-97s were purchased to construct four Super Guppy aircraft, which were even longer and larger than the original.

The various Guppy aircraft served throughout the 1960s, 1970s, and beyond, initially transporting space components, and later, as NASA scaled down its operations after the success of the Apollo program, transporting airliner sections.[1]

The Pregnant Guppy was sold to American Jet Industries and registered N126AJ. Leon Yarzab was assigned as its chief mechanic. It was broken up at Van Nuys in 1979.

Specifications

Data from Janes All The Worlds Aircraft 1965

General characteristics

Performance

See also

Related development

References

  1. 1.0 1.1 1.2 1.3 1.4 1.5 Taylor, Michael J.H. . “ Jane's Encyclopedia of Aviation. Studio Editions. London. 1989. ISBN 0-517-69186-8
  2. http://www.allaboutguppys.com/
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.

External links