Air Assault Badge

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Air Assault Badge
AirAssault.gif
Awarded by United States Army
Type Badge
Awarded for Air Assault training course
Status Currently awarded
Statistics
Established 1974
Last awarded Ongoing
Precedence
Next (higher) Pathfinder Badge
Next (lower) Aviation Badges[1]

The Air Assault Badge[2] is awarded by the U.S. Army for successful completion of the Air Assault School, a two-week (ten-day) course. The course includes three phases of instruction involving U.S. Army rotary wing aircraft: combat air assault operations; rigging and slingload operations; and rappelling from a helicopter.

According to the United States Army Institute of Heraldry, "The Air Assault Badge was approved by the Chief of Staff, Army, on 18 January 1978, for Army-wide wear by individuals who successfully completed Air Assault training after 1 April 1974. The badge had previously been approved as the Airmobile Badge authorized for local wear by the Commander of the 101st Airborne Division, effective 1 April 1974."[3] The division had been reorganized from parachute to airmobile in mid-1968 in Vietnam and designated the 101st Airborne Division (Airmobile). The parenthetical designation changed to Air Assault on 4 October 1974 and the name of the badge was likewise changed.[4]

Training locations

Formal air assault training has been conducted at Fort Campbell, Kentucky by the 101st Airborne Division (Air Assault) since the Air Assault School was formed in 1974. During the early stages of the occupation of Iraq in late 2003, the division conducted a course in-theater to maintain Air Assault proficiency.[5]

Air Assault training is also offered by the Army National Guard (ARNG) Warrior Training Center[6] at Fort Benning, which conducts training both at the post and at a variety of other locations throughout the United States[7] by means of Mobile Training Teams.

A III Corps Air Assault School was announced for Fort Hood that was to start in June 2012.[8] The first class of the XVIII Airborne Corps Air Assault School at Fort Bragg, NC graduated on October 4, 2013[9]

Air assault training has also been conducted for varying durations of time at other locations, although most do not currently do so (2013):

Wearing of the badge

The wearing of the Air Assault Badge on Army uniforms is governed by AR 670-1, Wear and Appearance of Army Uniforms.[31]

Vietnam veterans of the 101st Airborne Division and 1st Cavalry Division have sought the retroactive award of the Air Assault Badge for their training and pioneering experience in combat, but the Army has yet to grant their request.[32]

Origin

Maj. Jack R. Rickman is credited with the design of the Air Assault Badge when he was in 1971 on tour with the 101st Airborne Division in Vietnam. He thought little of the outcome of the design assignment, given to him by a division operations officer, which the Army adopted officially in January 1978. He was made aware of his part in the badge design years later when he recognized his design work seen in a published photograph. He never earned a badge himself.[33]

The design was influenced by the Parachutist Badge[34] worn when the division was on jump status, as well as the Glider Badge[35] worn by glider units during World War II. Charles Bloodworth, a pathfinder officer in the 101st during the early 1970s, wrote, "Locally designed and fabricated, the badge was deliberately crafted to mimic the glider wings of WWII. The nose of the Huey took the place of the glider body, and the horizontal rotor blade was the spitting image of the glider wing." The glider wing played an integral part of WWII, being a strong symbolic gesture to the pilots given permission to wear this badge.[36][citation needed]

The 101st returned from Vietnam to Fort Campbell, Kentucky and the 173rd Airborne Brigade was inactivated with its assets transferred to form the division's 3rd Brigade, at the time was on jump status. The remainder of the division was organized as Airmobile. In February 1974, Major General Sidney B. Berry, Commanding General, signed Division General Order 179 authorizing the wearing of the Airmobile Badge effective 1 April 1974, the same date that the 3rd Brigade would terminate its jump status.

Bloodworth describes the transition of the post-war division to fully Air Assault and the adoption of the Air Assault Badge at this link.[2]

Wing background trimmings

When the 101st adopted Air Assault wings, it also adopted their wear with the cloth wing background trimmings (ovals) previously worn behind Parachute wings. According to AR 670-1, Wear and Appearance of Army Uniforms and Insignia, "a background trimming is authorized for organizations designated (by structure, equipment and mission) 'Airborne' or 'Air Assault' by HQ DA. Qualified personnel are authorized to wear the background trimming with the Parachutist or Air Assault badges."[31] The following are the wing trimmings worn by the qualified members of air assault units but do not include all trimmings that are authorized to be found on the U.S. Army Institute of Heraldry (TIOH) website:

101st Airborne Division (Air Assault)

Air Assault Badge with background trimming (oval) for the 3d Battalion, 187th Infantry Regiment, 3d Brigade Combat Team, 101st Airborne Division (Air Assault)
  • Headquarters Battalion, 101st Airborne Division (Air Assault)
  • 1st Brigade Combat Team
    • Headquarters and Headquarters Company, 1st BCT
    • 1st Battalion, 327th Infantry Regiment
    • 2nd Battalion, 327th Infantry Regiment
    • 1st Battalion, 506th Infantry Regiment[37]
    • 1st Squadron, 32d Cavalry Regiment[38]
    • 2nd Battalion, 320th Field Artillery Regiment
    • 326th Engineer Battalion
    • 426th Brigade Support Battalion (formerly 426th Forward Support Battalion)[39]
  • 2d Brigade Combat Team
    • Headquarters and Headquarters Company, 2nd BCT
    • 1st Battalion, 502nd Infantry Regiment
    • 2nd Battalion, 502nd Infantry Regiment
    • 1st Battalion, 26th Infantry Regiment[40]
    • 1st Squadron, 75th Cavalry Regiment[41]
    • 1st Battalion, 320th Field Artillery Regiment
    • 526th Brigade Support Battalion[42]
    • Special Troops Battalion, 2d BCT[43]
  • 3d Brigade Combat Team
    • Headquarters and Headquarters Company, 3rd BCT
    • 1st Battalion, 187th Infantry Regiment
    • 3rd Battalion, 187th Infantry Regiment
    • 2d Battalion, 506th Infantry Regiment[44]
    • 1st Squadron, 33d Cavalry Regiment[45]
    • 3rd Battalion, 320th Field Artillery Regiment
    • 21st Engineer Battalion[46]
    • 626th Brigade Support Battalion[47]
  • 101st Combat Aviation Brigade
    • Headquarters and Headquarters Company
    • 2nd Squadron, 17th Cavalry Regiment
    • 1st Battalion, 101st Aviation Regiment
    • 5th Battalion, 101st Aviation Regiment
    • 6th Battalion, 101st Aviation Regiment
    • 96th Aviation Support Battalion

Army National Guard air assault units

Trimmings have been denied by the Institute of Heraldry to units in the Army National Guard, such as the California ARNG's 1st Battalion, 184th Infantry Regiment[48] although they have the parenthetical designation “Air Assault”.

As late as 2004: “current policy requires units to be designated as Airborne or Air Assault for Soldiers to be authorized the wear of the background trimming insignia on their service uniform. Force structure developers within Headquarters, Department of the Army, utilized the Air Assault Modified Table of Organization and Equipment (MTOE) when documenting your unit’s structure. Accordingly, the use of the Air Assault MTOE template for your organization was intended to provide Combatant Commanders a more ‘robust’ infantry structure, not to increase the number of air assault units in our Army today. Therefore, your MTOE narrative does not designate an air assault mission to your unit, nor does the current document provide the full resources normally authorized a designated Air Assault organization. Granting your request is not in keeping with the intent for which the organization was initially created; thus your request is denied.”[49]

Original badge

OldAirmobileBadge.gif

On 7 February 1963, the colors of the 11th Airborne Division were reactivated at Fort Benning, GA, as the 11th Air Assault Division (Test). The 11th was a small unit, never intended for deployable status, and used to test the airmobile concept then under development. Units of the 2nd Infantry Division, also located at Fort Benning, were “borrowed” for large-scale airmobile tests and maneuvers.

An earlier Air Assault Badge, pictured on the right, was worn in the early 1960s by troops of 11th who qualified for it by making three helicopter rappels from 60 feet (18 m) and three from 120 feet (37 m).[50] Soldiers were also required to be knowledgeable of aircraft safety procedures; familiar with aircraft orientation; proficient in hand and arm signals and combat assault operations; able to prepare, inspect and rig equipment for external sling loads; and able to lash down equipment inside helicopters. The badge was first awarded in early 1964 and was only authorized for wear by soldiers within the 11th, as it was a division award and not authorized for Army-wide wear by the Department of the Army.[51][52][citation needed]

On 30 June 1965, the colors of the 11th Air Assault Division were deactivated and its assets merged with the 2nd Infantry Division to become the 1st Cavalry Division (Airmobile). The colors of the 2nd Infantry Division were sent to Korea, where the existing 1st Cavalry Division was reflagged as 2nd Infantry Division and the colors of the 1st Cavalry Division sent to Fort Benning. Shortly thereafter the 1st Cavalry Division (Airmobile) was sent to Vietnam.

Air Force wear

All of the military services can and do send personnel to the U.S. Army's Air Assault School. However, as of the 17 January 2014 update to AFI36-2903 (USAF uniform regulations), U.S. Air Force personnel are authorized to wear the Air Assault Badge along with other special skill badges they have earned through the other Uniform Services. This means that only the Army and the Air Force authorize their personnel to wear the Air Assault Badge on their uniforms upon graduation of the Air Assault Course.[53][54][55][56]

Navy, Marine Corps, and Coast Guard wear

The Army's Air Assault Badge is not authorized for wear on uniforms of the U.S. Navy, U.S. Marine Corps, or U.S. Coast Guard.[57][58][59]

References

  1. ↑ Army Regulation 600-8-22 Military Awards (24 June 2013). Table 8-1, U.S. Army Badges and Tabs: Orders of precedence. p. 120
  2. ↑ TIOH page
  3. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  4. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  5. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  6. ↑ 6.0 6.1 Lua error in package.lua at line 80: module 'strict' not found.
  7. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  8. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  9. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  10. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  11. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  12. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  13. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  14. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  15. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  16. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  17. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  18. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  19. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  20. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  21. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  22. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  23. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  24. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  25. ↑ [1] Archived August 13, 2011 at the Wayback Machine
  26. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  27. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  28. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  29. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  30. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  31. ↑ 31.0 31.1 Army Regulation 670-1: Wear and Appearance of Army Uniforms and Insignia. Armypusb.army.mil.
  32. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  33. ↑ Army Times, 16 March 1981.
  34. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  35. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  36. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  37. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  38. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  39. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  40. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  41. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  42. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  43. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  44. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  45. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  46. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  47. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  48. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  49. ↑ A letter dated 1 April 2004 from Colonel Paris M. Mack, Chief, R&R Task Force, Office of the Deputy Chief of Staff G-1 to Lieutenant Colonel Steven Goff, Commander, 1st Battalion, 184th Infantry.
  50. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  51. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  52. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  53. ↑ U.S. Air Force Instruction 36-2903: Dress and Personal Appearance of Air Force Personnel, Secretary of the Air Force, dated 17 January 2014, last accessed 20 June 2014
  54. ↑ AF uniform policy update: welcome back morale t-shirts, badges and limitless athletic shoes, U.S. Air Force News, dated 20 January 2014, last accessed 20 June 2014
  55. ↑ Airmen Vie for Slots in Army Air Assault Course, U.S. Air Force Official Website, dated 7 February 2011, last accessed 20 June 2014
  56. ↑ Official USAF Photo of Maj. Creel at Distinguished Flying Cross award ceremony wearing an Air Assault Badge on his USAF Service Dress Uniform, U.S. Air Force Official Website, posted: 18 May 2012, last accessed 11 January 2014
  57. ↑ Navy Uniform Regulations, Chapter 5, updated 24 March 2011, last accessed 3 August 2013
  58. ↑ Marine Corps Uniform Regulation P1020.34, Chapter 4, updated 29 October 2009, last accessed 3 August 2013
  59. ↑ Coast Guard Uniform Regulation, M1020.6G, updated March 2012, last accessed 3 August 2013

External links


Retrieved from "https://infogalactic.com/w/index.php?title=Air_Assault_Badge&oldid=1815812"