Albatros D.XI

Albatros D.XI
300px
Role	Fighter
Manufacturer	Albatros Flugzeugwerke
Primary user	Germany

The Albatros D.XI was a German single-seat fighter biplane first flown in February 1918. It was the first Albatros design to use a rotary engine, in the form of the 120 kW (160 hp) Siemens-Halske Sh.III, and also featured a new wing construction with diagonal struts from the fuselage replacing traditional wire bracing.

Design & development

The wings had unequal spans with the upper planes having greater span than the lower ones, and were braced by I-struts with an aerofoil cross-section, additional rigidity being provided by twinned diagonal struts from the base of these to the top of the fuselage, located where the "landing wires" of a normal wire-braced biplane would be. The use of a rotary engine necessitated a large-diameter propeller and a correspondingly tall undercarriage.

The D.XI was armed with the same twin 7.92 mm (.312 in) Spandau LMG 08/15 machine guns employed on other Albatros fighters. Two prototypes were built, the first having balanced, parallel-chord ailerons and a four-blade propeller; and the second with inversely tapered, unbalanced ailerons and a two-blade propeller. The D.XI was not put into production.

Specifications (D.XI)

General characteristics

• Crew: one pilot
• Length: 5.58 m (18 ft 4 in)
• Wingspan: 8.00 m (26 ft 3 in)
• Wing area: 18.5 m² (199 ft²)
• Empty weight: 494 kg (1,089 lb)
• Gross weight: 723 kg (1,594 lb)
• Powerplant: 1 × Siemens-Halske Sh.III, 120 kW (160 hp)

Performance

• Maximum speed: 190 km/h (120 mph)
• Endurance: 2 hours

Armament

• 2 × forward-firing 7.92 mm (.312 in) LMG 08/15 machine guns

References

• Das Virtuelle Luftfahrtmuseum