Art of ancient Egypt

From Infogalactic: the planetary knowledge core
(Redirected from Ancient Egyptian art)
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Ancient Egyptian art is the painting, sculpture, architecture and other arts produced by the civilization of Ancient Egypt in the lower Nile Valley from about 3000 BC to 100 AD. Ancient Egyptian art reached a high level in painting and sculpture, and was both highly stylized and symbolic. Much of the surviving art comes from tombs and monuments and thus there is an emphasis on life after death and the preservation of knowledge of the past.

Ancient Egyptian art was created using media ranging from drawings on papyrus through wood, stone, and paintings. Ancient Egyptian art displays an extraordinarily vivid representation of the Ancient Egyptian's socioeconomic status and belief systems. Egyptian styles changed remarkably little over more than three thousand years.

Periods

Sunk relief of the crocodile god Sobek.

Symbolism

Symbolism also played an important role in establishing a sense of order. Symbolism, ranging from the pharaoh's regalia (symbolizing his power to maintain order) to the individual symbols of Egyptian gods and goddesses, is omnipresent in Egyptian art. Animals were usually also highly symbolic figures in Egyptian art. Colours were more expressive rather than natural: red skin implied hard working tanned youth, whereas yellow skin was used for women or middle-aged men who worked indoors; blue or gold indicated divinity because of its unnatural appearance and association with precious materials; the use of black for royal figures expressed the fertility of the Nile from which Egypt was born. Stereotypes were employed to indicate the geographical origins of foreigners[1]

Hierarchical scale

Tomb of Sarenput II.

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Egyptian art uses hierarchical proportion, where the size of figures indicates their relative importance. The gods or the divine pharaoh are usually larger than other figures and the figures of high officials or the tomb owner are usually smaller, and at the smallest scale any servants and entertainers, animals, trees, and architectural details.[2]

Painting

Wall painting of Nefertari.

Not all Egyptian reliefs were painted, and less prestigious works in tombs, temples and palaces were just painted on a flat surface. Stone surfaces were prepared by whitewash, or if rough, a layer of coarse mud plaster, with a smoother gesso layer above; some finer limestones could take paint directly. Pigments were mostly mineral, chosen to withstand strong sunlight without fading. The binding medium used in painting remains unclear: egg tempera and various gums and resins have been suggested. It is clear that true fresco, painted into a thin layer of wet plaster, was not used. Instead the paint was applied to dried plaster, in what is called "fresco a secco" in Italian. After painting, a varnish or resin was usually applied as a protective coating, and many paintings with some exposure to the elements have survived remarkably well, although those on fully exposed walls rarely have.[3] Small objects including wooden statuettes were often painted using similar techniques.

Many ancient Egyptian paintings have survived due to Egypt's extremely dry climate. The paintings were often made with the intent of making a pleasant afterlife for the deceased. The themes included journey through the afterworld or protective deities introducing the deceased to the gods of the underworld (such as Osiris). Some tomb paintings show activities that the deceased were involved in when they were alive and wished to carry on doing for eternity.

In the New Kingdom and later, the Book of the Dead was buried with the entombed person. It was considered important for an introduction to the afterlife.

Egyptian paintings are painted in such a way to show a profile view and a side view of the animal or person at the same time. For example, the painting to the right shows the head from a profile view and the body from a frontal view. Their main colors were red, blue, green, gold, black and yellow.

Sculpture

A sculpted head of Amenhotep III.

The monumental sculpture of Ancient Egypt is world-famous, but refined and delicate small works exist in much greater numbers. The Egyptians used the distinctive technique of sunk relief, which is well suited to very bright sunlight. The main figures in reliefs adhere to the same figure convention as in painting, with parted legs (where not seated) and head shown from the side, but the torso from the front, and a standard set of proportions making up the figure, using 18 "fists" to go from the ground to the hair-line on the forehead.[4] This appears as early as the Narmer Palette from Dynasty I, but there as elsewhere the convention is not used for minor figures shown engaged in some activity, such as the captives and corpses.[5] Other conventions make statues of males darker than females ones. Very conventionalized portrait statues appear from as early as Dynasty II, before 2,780 BC,[6] and with the exception of the art of the Amarna period of Ahkenaten,[7] and some other periods such as Dynasty XII, the idealized features of rulers, like other Egyptian artistic conventions, changed little until after the Greek conquest.[8]

Egyptian pharaohs were always regarded as gods, but other deities are much less common in large statues, except when they represent the pharaoh as another deity; however the other deities are frequently shown in paintings and reliefs. The famous row of four colossal statues outside the main temple at Abu Simbel each show Rameses II, a typical scheme, though here exceptionally large.[9] Most larger sculpture survives from Egyptian temples or tombs; massive statues were built to represent gods and pharaohs and their queens, usually for open areas in or outside temples. The very early colossal Great Sphinx of Giza was never repeated, but avenues lined with very large statues including sphinxes and other animals formed part of many temple complexes. The most sacred cult image of a god in a temple, usually held in the naos, was in the form of a relatively small boat or barque holding an image of the god, and apparently usually in precious metal – none have survived.

Head of Pharaoh & Face from a coffin

By Dynasty IV (2680–2565 BC) at the latest the idea of the Ka statue was firmly established. These were put in tombs as a resting place for the ka portion of the soul, and so we have a good number of less conventionalized statues of well-off administrators and their wives, many in wood as Egypt is one of the few places in the world where the climate allows wood to survive over millennia, and many block statues. The so-called reserve heads, plain hairless heads, are especially naturalistic, though the extent to which there was real portraiture in Ancient Egypt is still debated.

Early tombs also contained small models of the slaves, animals, buildings and objects such as boats necessary for the deceased to continue his lifestyle in the afterworld, and later Ushabti figures.[10] However the great majority of wooden sculpture has been lost to decay, or probably used as fuel. Small figures of deities, or their animal personifications, are very common, and found in popular materials such as pottery. There were also large numbers of small carved objects, from figures of the gods to toys and carved utensils. Alabaster was often used for expensive versions of these; painted wood was the most common material, and normal for the small models of animals, slaves and possessions placed in tombs to provide for the afterlife.

Very strict conventions were followed while crafting statues and specific rules governed appearance of every Egyptian god. For example, the sky god (Horus) was essentially to be represented with a falcon’s head, the god of funeral rites (Anubis) was to be always shown with a jackal’s head. Artistic works were ranked according to their compliance with these conventions, and the conventions were followed so strictly that, over three thousand years, the appearance of statues changed very little. These conventions were intended to convey the timeless and non-aging quality of the figure's ka.[11]

Faience, pottery, and glass

Miniature Egyptian glassware from the New Kingdom period.

Egyptian faience, made from sand and chemicals, produced relatively cheap and very attractive small objects in a variety of colours, and was used for a variety of types of objects including jewelery. Ancient Egyptian glass goes back to very early Egyptian history, but was at first very much a luxury material. In later periods it became common, and highly decorated small jars for perfume and other liquids are often found as grave goods.

Ancient Egyptians used steatite (some varieties were called soapstone) and carved small pieces of vases, amulets, images of deities, of animals and several other objects. Ancient Egyptian artists also discovered the art of covering pottery with enamel. Covering by enamel was also applied to some stone works. The colour blue, first used in the very expensive imported stone lapis lazuli, was highly regarded by Ancient Egypt, and the pigment Egyptian blue was widely used to colour a variety of materials.

New Kingdom pottery c.1400 BC

Different types of pottery items were deposited in tombs of the dead. Some such pottery items represented interior parts of the body, like the lungs, the liver and smaller intestines, which were removed before embalming. A large number of smaller objects in enamel pottery were also deposited with the dead. It was customary to craft on the walls of the tombs cones of pottery, about six to ten inches tall, on which were engraved or impressed legends relating to the dead occupants of the tombs. These cones usually contained the names of the deceased, their titles, offices which they held, and some expressions appropriate to funeral purposes.

Papyrus

The Book of the Dead written on papyrus

Papyrus was used by ancient Egyptians (and exported to much of the ancient Mediterranean world) for writing and painting. Papyrus is relatively fragile, lasting at most a century or two in a library, and though used all over the classical world has only survived when buried in the very dry conditions of Egypt, and even then is often in poor condition. Papyrus texts illustrate all dimensions of ancient Egyptian life and include literary, religious, historical and administrative documents.

Amarna period

Two daughters of Akhenaten; Nofernoferuaton and Nofernoferure, c. 1375–1358 BC.

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

The Amarna period and the years before the pharaoh Akhenaten moved the capital there in the late Eighteenth Dynasty form the most drastic interruption to the continuity of style in the Old and New Kingdoms. Amarna art is characterized by a sense of movement and activity in images, with figures having raised heads, many figures overlapping and many scenes full and crowded. As the new religion was a monotheistic worship of the sun, sacrifices and worship were apparently conducted in open courtyards, and sunk relief decoration was widely used in these. The human body is portrayed differently in the Amarna style than Egyptian art on the whole. For instance, many depictions of Akhenaten's body give him distinctly feminine qualities, such as large hips, prominent breasts, and a larger stomach and thighs. This is a divergence from the earlier Egyptian art which shows men with perfectly chiseled bodies. Faces are still shown exclusively in profile.

Not many buildings from this period have survived the ravages of later kings, partially as they were constructed out of standard size blocks, known as Talatat, which were very easy to remove and reuse. Temples in Amarna, following the trend, did not follow traditional Egyptian customs and were open, without ceilings, and had no closing doors. In the generation after Akhenaten's death, artists reverted to their old styles. There were still traces of this period's style in later art.

Architecture

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Ancient Egyptian architects used sun-dried and kiln-baked bricks, fine sandstone, limestone and granite. Architects carefully planned all their work. The stones had to fit precisely together, since there was no mud or mortar. When creating the pyramids, ramps were used to allow workmen to move up as the height of the construction grew. When the top of the structure was completed, the artists decorated from the top down, removing ramp sand as they went down. Exterior walls of structures like the pyramids contained only a few small openings. Hieroglyphic and pictorial carvings in brilliant colors were abundantly used to decorate Egyptian structures, including many motifs, like the scarab, sacred beetle, the solar disk, and the vulture. They described the changes the Pharaoh would go through to become a god.[12]

Hieroglyphs

Pot with hieroglyphs.

Lua error in package.lua at line 80: module 'strict' not found.

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Hieroglyphs are the ancient Egyptian writing system in which pictures and symbols stand for sounds and words. Jean-Francois Champollion first decoded hieroglyphs from the Rosetta Stone, which was found in 1799. Hieroglyphs have more than 700 symbols.

Notes

  1. Historical Atlas of Ancient Egypt, Bill Manley (1996) p. 83
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Grove
  4. Smith, 33
  5. Smith, 12–13 and note 17
  6. Smith, 21–24
  7. Smith, 170–178; 192–194
  8. Smith, 102–103; 133–134
  9. Smith, 4–5; 208–209
  10. Smith, 89–90
  11. Lua error in package.lua at line 80: module 'strict' not found.

References

  • Smith, W. Stevenson, and Simpson, William Kelly. The Art and Architecture of Ancient Egypt, 3rd edn. 1998, Yale University Press (Penguin/Yale History of Art), ISBN 0300077475

Further reading

Lua error in package.lua at line 80: module 'strict' not found.

External links