Bauxite

From Infogalactic: the planetary knowledge core
(Redirected from Bauxite ore)
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Bauxite with US penny for comparison
QEMSCAN mineral maps of bauxite ore-forming pisoliths
Bauxite in Les Baux-de-Provence, France
Bauxite with core of unweathered rock
Bauxite output in 2005
One of the world's largest bauxite mines in Weipa, Australia

Bauxite, an aluminium ore, is the world's main source of aluminium. It consists mostly of the minerals gibbsite Al(OH)3, boehmite γ-AlO(OH) and diaspore α-AlO(OH), mixed with the two iron oxides goethite and haematite, the clay mineral kaolinite and small amounts of anatase TiO2. In 1821 the French geologist Pierre Berthier discovered bauxite near the village of Les Baux in Provence, southern France.[1] In 1861, French chemist Henri Sainte-Claire Deville named the mineral "bauxite".[2]

Formation

Lua error in package.lua at line 80: module 'strict' not found. Lateritic bauxites (silicate bauxites) are distinguished from karst bauxite ores (carbonate bauxites). The carbonate bauxites occur predominantly in Europe and Jamaica above carbonate rocks (limestone and dolomite), where they were formed by lateritic weathering and residual accumulation of intercalated clay layers – dispersed clays which were concentrated as the enclosing limestones gradually dissolved during chemical weathering.

The lateritic bauxites are found mostly in the countries of the tropics. They were formed by lateritization of various silicate rocks such as granite, gneiss, basalt, syenite, and shale. In comparison with the iron-rich laterites, the formation of bauxites depends even more on intense weathering conditions in a location with very good drainage. This enables the dissolution of the kaolinite and the precipitation of the gibbsite. Zones with highest aluminium content are frequently located below a ferruginous surface layer. The aluminium hydroxide in the lateritic bauxite deposits is almost exclusively gibbsite.

In the case of Jamaica, recent analysis of the soils showed elevated levels of cadmium, suggesting that the bauxite originates from recent Miocene ash deposits from episodes of significant volcanism in Central America.

Production trends

In 2009, Australia was the top producer of bauxite with almost one-third of the world's production, followed by China, Brazil, India, and Guinea. Although aluminium demand is rapidly increasing, known reserves of its bauxite ore are sufficient to meet the worldwide demands for aluminium for many centuries.[3] Increased aluminium recycling, which has the advantage of lowering the cost in electric power in producing aluminium, will considerably extend the world's bauxite reserves.

Numbers for 2010's total proven bauxite reserves x1,000 tonne[4]
Country Mine production Reserves Reserve base
2010 2011 (est.)
 Guinea 17,400 18,000 7,400,000 8,600,000
 Australia 68,400 67,000 6,200,000 7,900,000
 Vietnam 80 80 2,100,000 5,400,000
 Jamaica 8,540 10,200 2,000,000 2,500,000
 Brazil 28,100 31,000 3,600,000 2,500,000
 Guyana 1,760 2,000 850,000 900,000
 India 18,000 20,000 900,000 1,400,000
 China 44,000 46,000 830,000 2,300,000
 Greece 2,100 2,100 600,000 650,000
 Iran 500[5]
 Suriname 4,000 5,000 580,000 600,000
 Sierra Leone 1,090 1,700 180,000  ?
 Kazakhstan 5,310 5,400 160,000 450,000
 Venezuela 2,500 4,500 320,000 350,000
 Russia 5,480 5,800 200,000 250,000
 United States 30[5] N/A 20,000 40,000
Other countries 2,630 2,600 3,300,000 3,800,000
World total (rounded) 209,000 220,000 29,000,000 38,000,000

In November 2010, Nguyen Tan Dung, the prime minister of Vietnam, announced that Vietnam's bauxite reserves might total 11000 Mt; this would be the largest in the world.[6]

Processing

Bauxite being loaded at Cabo Rojo, Dominican Republic, to be shipped elsewhere for processing; 2007
Bauxite being digested by washing with a hot solution of sodium hydroxide at 175°C under pressure at National Aluminium Company, Nalconagar, India.

Bauxite is usually strip mined because it is almost always found near the surface of the terrain, with little or no overburden. Approximately 70% to 80% of the world's dry bauxite production is processed first into alumina, and then into aluminium by electrolysis as of 2010. Bauxite rocks are typically classified according to their intended commercial application: metallurgical, abrasive, cement, chemical, and refractory.

Usually, bauxite ore is heated in a pressure vessel along with a sodium hydroxide solution at a temperature of 150 to 200 °C. At these temperatures, the aluminium is dissolved as sodium aluminate (the Bayer process). The aluminium compounds in the bauxite may be present as gibbsite(Al(OH)3), boehmite(AlOOH) or diaspore(AlOOH); the different forms of the aluminium component will dictate the extraction conditions. The undissolved waste, bauxite tailings, after the aluminium compounds are extracted contains iron oxides, silica, calcia, titania and some un-reacted alumina. After separation of the residue by filtering, pure gibbsite is precipitated when the liquid is cooled, and then seeded with fine-grained aluminium hydroxide. The gibbsite is usually converted into aluminium oxide, Al2O3, by heating in rotary kilns or fluid flash calciners to a temperature in excess of 1000oC. This aluminium oxide is dissolved at a temperature of about 960 °C in molten cryolite. Next, this molten substance can yield metallic aluminium by passing an electric current through it in the process of electrolysis, which is called the Hall–Héroult process, named after its American and French discoverers.

Prior to the invention of this process in 1886, elemental aluminium was made by heating ore along with elemental sodium or potassium in a vacuum. The method was complicated and consumed materials that were themselves expensive at that time. This made early elemental aluminium more expensive than gold.[7]

See also

References

  1. P. Berthier (1821) "Analyse de l'alumine hydratée des Beaux, département des Bouches-du-Rhóne" (Analysis of hydrated alumina from Les Beaux, department of the Mouths-of-the-Rhone), Annales des mines, 1st series, 6 : 531-534.
  2. Notes:
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. 5.0 5.1 Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.

Further reading

  • Bárdossy, G. (1982): Karst Bauxites: Bauxite deposits on carbonate rocks. Elsevier Sci. Publ. 441 p.
  • Bárdossy, G. and Aleva, G.J.J. (1990): Lateritic Bauxites. Developments in Economic Geology 27, Elsevier Sci. Publ. 624 p. ISBN 0-444-98811-4
  • Grant, C.; lalor, G. and Vutchkov, M. (2005) Comparison of bauxites from Jamaica, the Dominican Republic and Suriname. Journal of Radioanalytical and Nuclear Chemistry p. 385–388 Vol.266, No.3
  • Hanilçi, N. (2013). Geological and geochemical evolution of the Bolkardaği bauxite deposits, Karaman, Turkey: Transformation from shale to bauxite. Journal of Geochemical Exploration

External links