# bc (programming language)

This article includes a list of references, related reading or external links, but its sources remain unclear because it lacks inline citations. (June 2013) |

**bc**, for **b**asic **c**alculator (often referred to as *bench calculator*), is "*an arbitrary precision calculator language*" with syntax similar to the C programming language. bc is typically used as either a mathematical scripting language or as an interactive mathematical shell.

A typical interactive usage is typing the command `bc`

on a Unix command prompt and entering a mathematical expression, such as

, whereupon `(1 + 3) * 2`

`8` will be output. While bc can work with arbitrary precision, it actually defaults to zero digits after the decimal point - so the expression

yields `2/3`

`0`. This can surprise new bc users unaware of this fact. The

option to bc sets the default `-l`

*scale* (digits after the decimal point) to 20, and adds several additional mathematical functions to the language.

bc first appeared in Version 6 Unix in 1975, and was written by Robert Morris and Lorinda Cherry of Bell Labs. bc was preceded by dc, an earlier arbitrary precision calculator written by the same authors. dc could do arbitrary-precision calculations, but its Reverse Polish Notation (RPN) syntax was inconvenient for users, and therefore bc was written as a front-end to dc. bc was a very simple compiler (a single yacc source file with a few hundred lines) which converted the new, C-like, bc syntax into dc's postfix notation, and piped the results through dc.

In 1991, POSIX rigorously defined and standardized bc. Two implementations of this standard survive today: The first is the traditional Unix implementation, a front-end to dc, which survives in Unix and Plan 9 systems. The second is the free software GNU bc, first released in 1991 by Philip A. Nelson. The GNU implementation has numerous extensions beyond the POSIX standard, and is no longer a front-end to dc (it is a bytecode interpreter).

## Contents

## POSIX bc

The POSIX standardized bc language is traditionally written as a program in the dc programming language to provide a higher level of access to the features of the dc language without the complexities of dc's terse syntax.

In this form, the bc language contains single letter variable, array and function names and most standard arithmetic operators as well as the familiar control flow constructs, (

, **if(**cond**)**...

and **while(**cond**)**...

) from C. Unlike C, an **for(**init**;**cond**;**inc**)**...** if** clause may not be followed by an

**.**

`else`

Functions are defined using a ** define** keyword and values are returned from them using a

**followed by the return value in parentheses. The**

`return`

**keyword (optional in C) is used to declare a variable as local to a function.**

`auto`

All numbers and variable contents are arbitrary precision numbers whose precision (in decimal places) is determined by the global ** scale** variable.

The numeric base of input (in interactive mode), output and program constants may be specified by setting the reserved ** ibase** (input base) and

**(output base) variables.**

`obase`

Output is generated by deliberately not assigning the result of a calculation to a variable.

Comments may be added to bc code by use of the C ** /*** and

**(start and end comment) symbols.**

`*/`

### Mathematical operators

#### Exactly as C

The following POSIX bc operators behave exactly like their C counterparts:

+ - * /+= -= *= /=++ -- < >== != <= >=( ) [ ] { }

#### Similar to C

The modulus operators, **%** & **%=** behave exactly like their C counterparts only when the global ** scale** variable is set to 0, i.e. all calculations are integer-only. Otherwise the computation is done with the appropriate scale.

`a%b`

is defined as `a-(a/b)*b`

. Examples:```
$ bc
bc 1.06
Copyright 1991-1994, 1997, 1998, 2000 Free Software Foundation, Inc.
This is free software with ABSOLUTELY NO WARRANTY.
For details type `warranty'.
scale=0; 5%3
2
scale=1; 5%3
.2
scale=20; 5%3
.00000000000000000002
```

#### Only resembling C

The operators:

^ ^=

... resemble the C bitwise exclusive-or operators, but are in fact the bc integer exponentiation operators.

Of particular note, the use of the ^ operator with negative numbers does not follow the C operator precedence. -2 ^ 2 gives the answer of 4 under bc rather than -4.

#### 'Missing' operators relative to C

The bitwise, boolean and conditional operators:

& | ^ && ||&= |= ^= &&= ||=<< >><<= >>=?:

... are not available in POSIX bc.

### Built-in functions

The ** sqrt()** function for calculating square roots is POSIX bc's only built-in mathematical function. Other functions are available in an external standard library.

The ** scale()** function for determining the precision (as with the

**variable) of its argument and the**

`scale`

**function for determining the number of significant decimal digits in its argument are also built-in.**

`length()`

### Standard library functions

bc's standard math library (defined with the **-l** option) contains functions for calculating sine, cosine, arctangent, natural logarithm, the exponential function and the two parameter Bessel function *J*. Most standard mathematical functions (including the other inverse trigonometric functions) can be constructed using these. See external links for implementations of many other functions.

The **-l** option changes the scale to 20 (source), so things such as modulo may work unexpectedly. For example, writing "bc -l" and then the command "print 3%2" outputs 0. But writing "scale=0" after "bc -l" and then the command "print 3%2" will output 1.

## Plan 9 bc

Plan 9 bc is just like POSIX bc but for an additional ** print** statement.

## GNU bc

GNU bc derives from the POSIX standard and includes many enhancements. It is entirely separate from dc-based implementations of the POSIX standard and is instead written in C. Nevertheless, it is fully backwards compatible as all POSIX bc programs will run unmodified as GNU bc programs.

GNU bc variables, arrays and function names may contain more than one character, some more operators have been included from C, and notably, an ** if** clause may be followed by an

**.**

`else`

Output is achieved either by deliberately not assigning a result of a calculation to a variable (the POSIX way) or by using the added ** print** statement.

Furthermore, a ** read** statement allows the interactive input of a number into a running calculation.

In addition to C-style comments, a ** #** character will cause everything after it until the next new-line to be ignored.

The value of the last calculation is always stored within the additional built-in ** last** variable.

### Extra operators

The following logical operators are additional to those in POSIX bc:

**&& || !**

... and are available for use in conditional statements (such as within an ** if** statement). Note, however, that there are still no equivalent bitwise or assignment operations.

### Functions

All functions available in GNU bc are inherited from POSIX. No further functions are provided as standard with the GNU distribution.

## Example code

Since the bc ** ^** operator only allows an integer power to its right, one of the first functions a bc user might write is a power function with a floating point exponent. Both of the below assume the standard library has been included:

### A 'Power' function in POSIX bc

```
/* A function to return the integer part of x */
define i(x) {
auto s
s = scale
scale = 0
x /= 1 /* round x down */
scale = s
return (x)
}
/* Use the fact that x^y == e^(y*log(x)) */
define p(x,y) {
if (y == i(y)) {
return (x ^ y)
}
return ( e( y * l(x) ) )
}
```

### An equivalent 'Power' function in GNU bc

```
# A function to return the integer part of a number
define int(number) {
auto oldscale
oldscale = scale
scale = 0
number /= 1 /* round number down */
scale = oldscale
return number
}
# Use the fact that number^exponent == e^(exponent*log(number))
define power(number,exponent) {
if (exponent == int(exponent)) {
return number ^ int(exponent)
} else {
return e( exponent * l(number) )
}
}
```

### Calculating pi to 10000 places

Calculate pi using the builtin arctangent function, *a()*.

```
$ bc -lq
scale=10000
4*a(1) # The atan of 1 is 45 degrees, which is pi/4 in radians.
# This may take several minutes to calculate.
```

### A translated C function

Because the syntax of bc is similar to that of C, published numerical functions written in C can often be translated into bc quite easily, which immediately provides the arbitrary precision of bc. For example, in the Journal of Statistical Software (July 2004, Volume 11, Issue 5), George Marsaglia published the following C code for the cumulative normal distribution:

```
double Phi(double x)
{
long double s=x,t=0,b=x,q=x*x,i=1;
while(s!=t)
s=(t=s)+(b*=q/(i+=2));
return .5+s*exp(-.5*q-.91893853320467274178L);
}
```

With some necessary changes to accommodate bc's different syntax, and realizing that the constant "0.9189..." is actually log(2*PI)/2, this can be translated to the following GNU bc code:

```
define phi(x) {
auto s,t,b,q,i,const
s=x; t=0; b=x; q=x*x; i=1
while(s!=t)
s=(t=s)+(b*=q/(i+=2))
const=0.5*l(8*a(1)) # 0.91893...
return .5+s*e(-.5*q-const)
}
```

## Using bc in shell scripts

bc can be used non-interactively, with input via a pipe. This is useful inside shell scripts. For example:

```
$ result=$(echo "scale=2; 5 * 7 /3;" | bc)
$ echo $result
11.66
```

In contrast, note that the bash shell only performs integer arithmetic, e.g.:

```
$ result=$((5 * 7 /3))
$ echo $result
11
```

One can also use the here-string idiom (in bash, ksh, csh):

```
$ bc -l <<< "5*7/3"
11.66666666666666666666
```

## See also

## References

- The Single UNIX® Specification, Issue 7 from The Open Group : arbitrary-precision arithmetic language – Commands & Utilities Reference,
- GNU bc manual page
- POSIX bc manual page
- Plan 9 bc manual page
- 7th Edition Unix bc manual page
- A comp.compilers article on the design and implementation of C-bc
- 6th Edition Unix bc source code, the first release of bc, from May 1975, compiling bc syntax into dc syntax

## External links

- Dittmer, I. 1993. Error in Unix commands dc and bc for multiple-precision-arithmetic. SIGNUM Newsl. 28, 2 (Apr. 1993), 8–11.
- Online version of GNU bc
- Collection of useful GNU bc functions
- GNU bc (and an alpha version) from the Free Software Foundation
- bc for Windows from GnuWin32
- X-bc - A Graphical User Interface to bc
- extensions.bc - contains functions of trigonometry, exponential functions, functions of number theory and some mathematical constants
- scientific_constants.bc - contains particle masses, basic constants, such as speed of light in the vacuum and the gravitational constant

- bc Mobile - A Graphical User Interface to bc for iPhone