Becconsall Old Church

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Becconsall Old Church
Becconsall Old Church from the southwest
Becconsall Old Church from the southwest
Becconsall Old Church is located in the Borough of West Lancashire
Becconsall Old Church
Becconsall Old Church
Location in West Lancashire
Lua error in package.lua at line 80: module 'strict' not found.
OS grid reference NZ 274 513
Location Hesketh Bank, Lancashire
Country England
Denomination Anglican
Website Churches Conservation Trust
History
Dedication All Saints
Architecture
Functional status Redundant
Heritage designation Grade II
Designated 11 October 1968
Architectural type Church
Style Georgian
Construction cost £90 (£11,400 in 2021)
Specifications
Length 36 feet 6 inches (11 m)
Width 24 feet (7 m)
Other dimensions Sanctuary 8 feet (2 m) by
15 feet (5 m)
Materials Brick, stone slate roof

Becconsall Old Church is a redundant church in the village of Hesketh Bank, Lancashire, England. It is recorded in the National Heritage List for England as a designated Grade II listed building,[1] and is in the care of the Churches Conservation Trust.[2] It is situated on a lane leading to a boatyard on the River Douglas.[2]

History

The church was built in 1764 on the site of a former chantry chapel,[1] which had been built in the 16th century as the private chapel of the Becconsall family.[3] The present church cost £90 (equivalent to £11,400),[4], £60 of which was subscribed by local farmers, and £30 by a levy on the parish. It is constructed in handmade bricks that were supplied by Sir Thomas Hesketh, the lord of the manor.[5] A porch was added to the west end during the 20th century.[1] The church is dedicated to All Saints, but became redundant when a new church with the same dedication was built on a different site in 1926. After this, the old church was only used for funerals and for services on "Old Church Sunday". During the Second World War a bomb fell in the churchyard, damaging gravestones and causing minor damage to the exterior of the church, with shrapnel damage to the gravestones. By 1985 the church was in such a bad state of repair that it had to be closed. It was taken into the care of the charity the Churches Conservation Trust in the 1990s. The charity carried out repairs and the church was reopened in 1995 for the Old Church Sunday services to be resumed.[5]

Architecture

The church is constructed in red brick in English garden wall bond with a stone slate roof. Its plan consists of a simple two-bay rectangular nave with a small sanctuary, a porch at the west end, and a small vestry at the northeast corner.[1] The nave measures 36 feet 6 inches (11 m) by 24 feet (7 m), with the sanctuary being 8 feet (2 m) by 15 feet (5 m).[6] The porch has a round-headed doorway and above it are two round-headed windows. On the apex of the west gable is a small bellcote. On each side of the church are two large round-headed windows, and at the east end is a large Venetian window. Inside the church is a west gallery supported by four fluted wooden pillars. The font, dating from the 18th century, is the form of a vase, and is made from Coade stone.[1] Also in the church are a pulpit, a lectern, two pews, an altar, and some panelling. The bellcote contains a single bell that had been removed but was returned to the church by the Trust.[2]

External features

In the churchyard is a stone sundial dated 1776. It consists of a square baluster-shaped pedestal with a brass plate. The gnomon is missing. The sundial is listed at Grade II.[7]

See also

References

  1. 1.0 1.1 1.2 1.3 1.4 Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 2.2 Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. UK Retail Price Index inflation figures are based on data from Lua error in package.lua at line 80: module 'strict' not found.
  5. 5.0 5.1 Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.

Further reading

  • Lua error in package.lua at line 80: module 'strict' not found.