Bremer River (Queensland)

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Bremer
River
Railway bridge across the Bremer River in Ipswich
Name origin: Captain James Gordon Bremer[1]
Country Australia
State Queensland
Regions Scenic Rim, South East Queensland
Part of Brisbane River catchment
Tributaries
 - left Western Creek, Franklin Vale Creek
 - right Warrill Creek, Reynold Creek, Purga Creek, Deebing Creek, Bundamba Creek
Cities Ipswich, Brisbane
Source Scenic Rim
 - location Main Range National Park
 - elevation 140 m (459 ft)
 - coordinates Lua error in package.lua at line 80: module 'strict' not found.
Mouth confluence with the Brisbane River
 - location Barellan Point
 - elevation 4 m (13 ft)
 - coordinates Lua error in package.lua at line 80: module 'strict' not found.
Length 100 km (62 mi)
Basin 2,032 km2 (785 sq mi)
National park Main Range National Park
Location of Bremer River river mouth in Queensland
Wikimedia Commons: Bremer River
[2]

The Bremer River is a river that is a tributary of the Brisbane River, located in the Scenic Rim and Brisbane regions of South East Queensland, Australia. The 100-kilometre (62 mi)-long Bremer River drains several Scenic Rim valleys in south-east Queensland, including the Fassifern Valley, with its catchment area covering approximately 2,032 square kilometres (785 sq mi).[3] Most valleys within the catchment have extensive river terraces. The Bremer River system is extremely degraded.

Europeans John Oxley and Allan Cunningham discovered the river in 1824 and it was first named by Oxley as Bremer's Creek presumably after Captain James Gordon Bremer who was in charge of HMS Tamar, at that time performing duties in the waters of the colony of New South Wales.[1]

Course and features

File:Churchbank Weir.webm
Churchbank Weir on Warrill Creek, 2015

The Bremer rises in the hills of the Scenic Rim, passes close to the town of Rosewood and winds through the city of Ipswich. The catchment area is bordered by the Little Liverpool Range to the west, with the Main Range lying to the south and south-west. Towards the east is Flinders Peak and the Teviot Range.[4] The river has a number of tributaries including Deebing Creek, Bundamba Creek, Purga Creek, Reynolds Creek, Warrill Creek, Western Creek and Franklin Vale Creek. The town of Grandchester is situated on Western Creek and Rosevale was settled on the upper reaches. Its length is about 100 km (62 mi).[5]

History

File:Bremer River, Ipswich, 1872.jpg
Bremer River at Ipswich in 1872

The first sighting of the Bremer River by Europeans was made by John Oxley and Allan Cunningham on 19 September 1824 as they explored the Brisbane River.[6]:9 On their return journey six days later the exploration party camped on the opposite side of the river where the tributary entered the main stream. Shortly after Oxley began to refer to the tributary as the Bremer River but didn't specify from who the name was derived from.[6]:10 It has been assumed to be named in honour of James Gordon Bremer, a naval officer on the HMS Tamar. No attempt to explore the Bremer was made at this time. Edmund Lockyer passed through the area in 1825, noting the junction of the Bremer, referring to it as Bremer's Creek but he did not explore it. The first European to travel along the river was Captain Patrick Logan who in either late 1826 or early 1827 investigated the Bremer. He discovered deposits of limestone at the site of what was to become Ipswich.[6]:10 Upstream from there the river became shallow and rocky, so Logan did not explore further.

The upper reaches of the river were explored by Alan Cunningham in 1828 while he was searching for a route to the Darling Downs. Cunningham made measurements and produced a map which he sent to Governor Darling.[6]:11

The first steam vessel on the river was the Experiment on 18 June 1846 after spending the night stranded on a mud band at Goodna.[6]:101

In 1863, an immigration depot was built on the north bank of the Bremer, after residents of Ipswich petitioned for a depot to alleviate a shortage of labour.[6]:25 Immigrants were brought to Ipswich by paddle steamer. The depot was sometimes overcrowded and continued to operate until 1900.

Before the railway line from Ipswich to Brisbane was completed in 1875, the river served as an important navigation route between the two towns.

The Bremer Catchment Association was established in 1995.[6]:99 The group engages small community groups in projects such as weed control and tree planting.

Degradation

Industrial waste has flowed into the river soon after the catchment was settled. Photos from 1870 show the riverbanks cleared of vegetation. This may have been from the cutting of timber or because an engineer had encouraged the clearing of trees close to the river because when they fell into the river they dragged earth with them, creating an obstacle for steamers in an already narrow channel.[6]:95

The slow-flowing river system is known to flood and is considered to be heavily polluted, suffering from poor water quality.[citation needed] The Bremer does not receive enough water in its catchment to meet both human requirements and the need to flush out impurities.[citation needed] This results in poor water quality with high levels of turbidity, high nutrient levels and high levels of bacteria, especially where sewerage and drain runoff from the city of Ipswich is discharged into the river.[citation needed]

Coordinated attempts to improve water quality began after the establishment of the Water Quality Council in 1973. Testing revealed the worst pollution came from woolen mills and meatworks at Dinmore, where organic waste entered the river untreated.[6]:99

Land degradation was identified as a serious problem in the catchment after a Department of Primary Industries survey was conducted in 1979.[7] Riparian vegetation has been nearly completely removed and the banks are now weed-infested.[8] Downstream the river suffers from not only sewerage and farming runoff but also abattoir effluent.[8]

In 2006, 2008, 2009, 2010, 2011 and 2012 the Healthy Waterways annual assessment of water quality rated the Bremer River an F, the lowest grading possible.[9][10][11][12] The Ipswich City Council has responded by increasing fines for allowing pollutants to contaminate the river.[13]

Heavy metals including mercury, chromium, nickel and cadmium were found in Warrill Creek, a tributary of the Bremer, in 2009.[14] The source of the contamination was discharge from the RAAF Base Amberley. The contaminates did not reach the Bremer River itself.[15] In 2010, the Ipswich City Council and the International Riverfoundation launched a fund to help clean up the river.[16]

The worst pest species was the introduced water hyacinth, which sometimes was so dense it blocked boats. Severe outbreaks occurred in 1917, 1935—36, 1941 and 1965.[6]:97

Water supply

Moogerah Dam was built in the upper reaches of Reynolds Creek.[17] The dam provides potable water for towns such as Boonah and is an irrigation source for crop farmers and those grazing cattle.

See also

<templatestyles src="Stack/styles.css"/>

References

  1. 1.0 1.1 Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. 6.0 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. 8.0 8.1 Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. Lua error in package.lua at line 80: module 'strict' not found.
  12. Lua error in package.lua at line 80: module 'strict' not found.
  13. Lua error in package.lua at line 80: module 'strict' not found.
  14. Lua error in package.lua at line 80: module 'strict' not found.
  15. Lua error in package.lua at line 80: module 'strict' not found.
  16. Lua error in package.lua at line 80: module 'strict' not found.
  17. Lua error in package.lua at line 80: module 'strict' not found.

External links