Brewing is the production of beer by steeping a starch source (commonly cereal grains) in water and fermenting the resulting sweet liquid with yeast. It may be done in a brewery by a commercial brewer, at home by a homebrewer, or by a variety of traditional methods such as communally by the indigenous peoples in Brazil when making cauim. Brewing has taken place since around the 6th millennium BC, and archaeological evidence suggests that emerging civilizations including ancient Egypt and Mesopotamia brewed beer. Since the nineteenth century the brewing industry has been part of most western economies.
The basic ingredients of beer are water and a fermentable starch source such as malted barley. Most beer is fermented with a brewer's yeast and flavoured with hops. Secondary starch sources (adjuncts), such as maize (corn), rice, or sugar, may also be used. Less widely used starch sources include millet, sorghum and cassava. The amount of each starch source in a beer recipe is collectively called the grain bill.
Steps in the brewing process include malting, milling, mashing, lautering, boiling, fermenting, conditioning, filtering, and packaging. There are three main fermentation methods, warm, cool and spontaneous. Fermentation may take place in an open or closed fermenting vessel; a secondary fermentation may also occur in the cask or bottle. There are several additional brewing methods, such as barrel aging, double dropping, and Yorkshire Square.
- 1 History
- 2 Ingredients
- 3 Brewing process
- 4 Mashing
- 5 Boiling
- 6 Fermenting
- 7 Conditioning
- 8 Filtering
- 9 Packaging
- 10 By-products
- 11 Brewing industry
- 12 References
- 13 External links
Brewing has taken place since around the 6th millennium BC, and archaeological evidence suggests emerging civilizations including ancient Egypt and Mesopotamia brewed beer. Descriptions of various beer recipes can be found in cuneiform (the oldest known writing) from ancient Mesopotamia. In Mesopotamia the brewer's craft was the only profession which derived social sanction and divine protection from female deities/goddesses, specifically: Ninkasi, who covered the production of beer, Siris, who was used in a metonymic way to refer to beer, and Siduri, who covered the enjoyment of beer.
As almost any cereal containing certain sugars can undergo spontaneous fermentation due to wild yeasts in the air, it is possible that beer-like beverages were independently developed throughout the world soon after a tribe or culture had domesticated cereal. Chemical tests of ancient pottery jars reveal that beer was produced as far back as about 7,000 years ago in what is today Iran. This discovery reveals one of the earliest known uses of fermentation and is the earliest evidence of brewing to date. In Mesopotamia, the oldest evidence of beer is believed to be a 6,000-year-old Sumerian tablet depicting people drinking a beverage through reed straws from a communal bowl. A 3900-year-old Sumerian poem honouring Ninkasi, the patron goddess of brewing, contains the oldest surviving beer recipe, describing the production of beer from barley via bread.
The invention of bread and beer has been argued to be responsible for humanity's ability to develop technology and build civilization. The earliest chemically confirmed barley beer to date was discovered at Godin Tepe in the central Zagros Mountains of Iran, where fragments of a jug, at least 5,000 years old was found to be coated with beerstone, a by-product of the brewing process.
Ale produced before the Industrial Revolution continued to be made and sold on a domestic scale, although by the 7th century AD beer was also being produced and sold by European monasteries. During the Industrial Revolution, the production of beer moved from artisanal manufacture to industrial manufacture, and domestic manufacture ceased to be significant by the end of the 19th century. The development of hydrometers and thermometers changed brewing by allowing the brewer more control of the process, and greater knowledge of the results.
Today, the brewing industry is a global business, consisting of several dominant multinational companies and many thousands of smaller producers ranging from brewpubs to regional breweries. More than 133 billion liters (35 billion gallons) are sold per year—producing total global revenues of $294.5 billion (£147.7 billion) in 2006.
The basic ingredients of beer are water; a starch source, such as malted barley, able to be fermented (converted into alcohol); a brewer's yeast to produce the fermentation; and a flavouring, such as hops, to offset the sweetness of the malt. A mixture of starch sources may be used, with a secondary saccharide, such as maize (corn), rice, or sugar, often being termed an adjunct, especially when used as a lower-cost substitute for malted barley. Less widely used starch sources include millet, sorghum, and cassava root in Africa, potato in Brazil, and agave in Mexico, among others. The amount of each starch source in a beer recipe is collectively called the grain bill.
Beer is composed mostly of water. Regions have water with different mineral components; as a result, different regions were originally better suited to making certain types of beer, thus giving them a regional character. For example, Dublin has hard water well suited to making stout, such as Guinness; while Pilsen has soft water well suited to making pale lager, such as Pilsner Urquell. The waters of Burton in England contain gypsum, which benefits making pale ale to such a degree that brewers of pale ales will add gypsum to the local water in a process known as Burtonisation.
- Starch source
The starch source in a beer provides the fermentable material and is a key determinant of the strength and flavour of the beer. The most common starch source used in beer is malted grain. Grain is malted by soaking it in water, allowing it to begin germination, and then drying the partially germinated grain in a kiln. Malting grain produces enzymes that will allow conversion from starches in the grain into fermentable sugars during the mash process. Different roasting times and temperatures are used to produce different colours of malt from the same grain. Darker malts will produce darker beers.
Nearly all beer includes barley malt as the majority of the starch. This is because of its fibrous husk, which is important not only in the sparging stage of brewing (in which water is washed over the mashed barley grains to form the wort) but also as a rich source of amylase, a digestive enzyme that facilitates conversion of starch into sugars. Other malted and unmalted grains (including wheat, rice, oats, and rye, and, less frequently, maize (corn) and sorghum) may be used. In recent years, a few brewers have produced gluten-free beer made with sorghum with no barley malt for people who cannot digest gluten-containing grains like wheat, barley, and rye.
Hops are the female flower clusters or seed cones of the hop vine Humulus lupulus, which are used as a flavouring and preservative agent in nearly all beer made today. Hops had been used for medicinal and food flavouring purposes since Roman times; by the 7th century in Carolingian monasteries in what is now Germany, beer was being made with hops, though it isn't until the thirteenth century that widespread cultivation of hops for use in beer is recorded. Before the thirteenth century, beer was flavoured with plants such as yarrow, wild rosemary, and bog myrtle, and other ingredients such as juniper berries, aniseed and ginger, which would be combined into a mixture known as gruit and used as hops are now used; between the thirteenth and the sixteenth century, during which hops took over as the dominant flavouring, beer flavoured with gruit was known as ale, while beer flavoured with hops was known as beer. Some beers today, such as Fraoch by the Scottish Heather Ales company and Cervoise Lancelot by the French Brasserie-Lancelot company, use plants other than hops for flavouring.
Hops contain several characteristics that brewers desire in beer: they contribute a bitterness that balances the sweetness of the malt; they provide floral, citrus, and herbal aromas and flavours; they have an antibiotic effect that favours the activity of brewer's yeast over less desirable microorganisms; and they aid in "head retention", the length of time that a foamy head will last. The preservative in hops comes from the lupulin glands which contain soft resins with alpha and beta acids. Though much studied, the preservative nature of the soft resins is not yet fully understood, though it has been observed that unless stored at a cool temperature, the preservative nature will decrease. Brewing is the sole major commercial use of hops.
Yeast is the microorganism that is responsible for fermentation in beer. Yeast metabolises the sugars extracted from grains, which produces alcohol and carbon dioxide, and thereby turns wort into beer. In addition to fermenting the beer, yeast influences the character and flavour. The dominant types of yeast used to make beer are Saccharomyces cerevisiae, known as ale yeast, and Saccharomyces pastorianus, known as lager yeast; Brettanomyces ferments lambics, and Torulaspora delbrueckii ferments Bavarian weissbier. Before the role of yeast in fermentation was understood, fermentation involved wild or airborne yeasts, and a few styles such as lambics still use this method today. Emil Christian Hansen, a Danish biochemist employed by the Carlsberg Laboratory, developed pure yeast cultures which were introduced into the Carlsberg brewery in 1883, and pure yeast strains are now the main fermenting source used worldwide.
- Clarifying agent
Some brewers add one or more clarifying agents to beer, which typically precipitate (collect as a solid) out of the beer along with protein solids and are found only in trace amounts in the finished product. This process makes the beer appear bright and clean, rather than the cloudy appearance of ethnic and older styles of beer such as wheat beers.
Examples of clarifying agents include isinglass, obtained from swimbladders of fish; Irish moss, a seaweed; kappa carrageenan, from the seaweed Kappaphycus cottonii; Polyclar (artificial); and gelatin. If a beer is marked "suitable for Vegans", it was generally clarified either with seaweed or with artificial agents, although the "Fast Cask" method invented by Marston's in 2009 may provide another method.
Malting is the process where barley grain is made ready for brewing. Malting is broken down into three steps in order to help to release the starches in the barley. First, during steeping, the grain is added to a vat with water and allowed to soak for approximately 40 hours. During germination, the grain is spread out on the floor of the germination room for around 5 days. The final part of malting is kilning when the malt goes through a very high temperature drying in a kiln; with gradual temperature increase over several hours. When kilning is complete, the grains are now termed malt, and they will be milled or crushed to break apart the kernels and expose the cotyledon, which contains the majority of the carbohydrates and sugars; this makes it easier to extract the sugars during mashing.
Mashing converts the starches released during the malting stage into sugars that can be fermented. The milled grain is mixed with hot water in a large vessel known as a mash tun. In this vessel, the grain and water are mixed together to create a cereal mash. During the mash, naturally occurring enzymes present in the malt convert the starches (long chain carbohydrates) in the grain into smaller molecules or simple sugars (mono-, di-, and tri-saccharides). This "conversion" is called saccharification. The result of the mashing process is a sugar rich liquid or "wort", which is then strained through the bottom of the mash tun in a process known as lautering. Prior to lautering, the mash temperature may be raised to about 75–78 °C (167–172 °F) (known as a mashout) to deactivate enzymes. Additional water may be sprinkled on the grains to extract additional sugars (a process known as sparging).
The wort is moved into a large tank known as a "copper" or kettle where it is boiled with hops and sometimes other ingredients such as herbs or sugars. This stage is where many chemical and technical reactions take place, and where important decisions about the flavour, colour, and aroma of the beer are made. The boiling process serves to terminate enzymatic processes, precipitate proteins, isomerize hop resins, and concentrate and sterilize the wort. Hops add flavour, aroma and bitterness to the beer. At the end of the boil, the hopped wort settles to clarify in a vessel called a "whirlpool", where the more solid particles in the wort are separated out.
After the whirlpool, the wort is rapidly cooled via a heat exchanger to a temperature where yeast can be added. The heat exchanger consists of tubing inside a tub of cold water. It is very important to quickly cool the wort to a level where yeast can be added safely as yeast is unable to grow in high temperatures. After the wort goes through the heat exchanger, the cooled wort goes into a fermentation tank. A type of yeast is selected and added, or "pitched", to the fermentation tank. When the yeast is added to the wort, the fermenting process begins, where the sugars turn into alcohol, carbon dioxide and other components. When the fermentation is complete the brewer may rack the beer into a new tank, called a conditioning tank. Conditioning of the beer is the process in which the beer ages, the flavour becomes smoother, and flavours that are unwanted dissipate. After conditioning for a week to several months, the beer may be filtered and force carbonated for bottling, or fined in the cask.
Mashing is the process of combining a mix of milled grain (typically malted barley with supplementary grains such as corn, sorghum, rye or wheat), known as the "grain bill", and water, known as "liquor", and heating this mixture in a vessel called a "mash tun". Mashing is a form of steeping, and defines the act of brewing, such as with making tea, sake, and soy sauce. Technically, wine, cider and mead are not brewed but rather vinified, as there is no steeping process involving solids. Mashing allows the enzymes in the malt to break down the starch in the grain into sugars, typically maltose to create a malty liquid called wort. There are two main methods – infusion mashing, in which the grains are heated in one vessel; and decoction mashing, in which a proportion of the grains are boiled and then returned to the mash, raising the temperature. Mashing involves pauses at certain temperatures (notably 45–62–73 °C or 113–144–163 °F), and takes place in a "mash tun" – an insulated brewing vessel with a false bottom. The end product of mashing is called a "mash".
Mashing usually takes 1 to 2 hours, and during this time the various temperature rests activate different enzymes depending upon the type of malt being used, its modification level, and the intention of the brewer. The activity of these enzymes convert the starches of the grains to dextrins and then to fermentable sugars such as maltose. A mash rest from 49–55 °C (120–131 °F) activates various proteases, which break down proteins that might otherwise cause the beer to be hazy. This rest is generally used only with undermodified (i.e. undermalted) malts which are decreasingly popular in Germany and the Czech Republic, or non-malted grains such as corn and rice, which are widely used in North American beers. A mash rest at 60 °C (140 °F) activates β-glucanase, which breaks down gummy β-glucans in the mash, making the sugars flow out more freely later in the process. In the modern mashing process, commercial fungal based β-glucanase may be added as a supplement. Finally, a mash rest temperature of 65–71 °C (149–160 °F) is used to convert the starches in the malt to sugar, which is then usable by the yeast later in the brewing process. Doing the latter rest at the lower end of the range favours β-amylase enzymes, producing more low-order sugars like maltotriose, maltose, and glucose which are more fermentable by the yeast. This in turn creates a beer lower in body and higher in alcohol. A rest closer to the higher end of the range favours α-amylase enzymes, creating more higher-order sugars and dextrins which are less fermentable by the yeast, so a fuller-bodied beer with less alcohol is the result. Duration and pH variances also affect the sugar composition of the resulting wort.
Lautering is the separation of the wort (the liquid containing the sugar extracted during mashing) from the grains. This is done either in a mash tun outfitted with a false bottom, in a lauter tun, or in a mash filter. Most separation processes have two stages: first wort run-off, during which the extract is separated in an undiluted state from the spent grains, and sparging, in which extract which remains with the grains is rinsed off with hot water. The lauter tun is a tank with holes in the bottom small enough to hold back the large bits of grist and hulls. The bed of grist that settles on it is the actual filter. Some lauter tuns have provision for rotating rakes or knives to cut into the bed of grist to maintain good flow. The knives can be turned so they push the grain, a feature used to drive the spent grain out of the vessel. The mash filter is a plate-and-frame filter. The empty frames contain the mash, including the spent grains, and have a capacity of around one hectoliter. The plates contain a support structure for the filter cloth. The plates, frames, and filter cloths are arranged in a carrier frame like so: frame, cloth, plate, cloth, with plates at each end of the structure. Newer mash filters have bladders that can press the liquid out of the grains between spargings. The grain does not act like a filtration medium in a mash filter.
After mashing, the beer wort is boiled with hops (and other flavourings if used) in a large tank known as a "copper" or brew kettle – though historically the mash vessel was used and is still in some small breweries. The boiling process is where chemical and technical reactions take place, including sterilization of the wort to remove unwanted bacteria, releasing of hop flavours, bitterness and aroma compounds through isomerization, stopping of enzymatic processes, precipitation of proteins, and concentration of the wort. Finally, the vapours produced during the boil volatilise off-flavours, including dimethyl sulfide precursors. The boil is conducted so that it is even and intense – a continuous "rolling boil". The boil on average lasts between 45 and 90 minutes, depending on its intensity, the hop addition schedule, and volume of water the brewer expects to evaporate. At the end of the boil, solid particles in the hopped wort are separated out, usually in a vessel called a "whirlpool".
Brew kettle or copper
Copper is the traditional material for the boiling vessel, because copper transfers heat quickly and evenly, and because the bubbles produced during boiling, and which would act as an insulator against the heat, do not cling to the surface of copper, so the wort is heated in a consistent manner. The simplest boil kettles are direct-fired, with a burner underneath. These can produce a vigorous and favourable boil, but are also apt to scorch the wort where the flame touches the kettle, causing caramelisation and making cleanup difficult. Most breweries use a steam-fired kettle, which uses steam jackets in the kettle to boil the wort. Breweries usually have a boiling unit either inside or outside of the kettle, usually a tall, thin cylinder with vertical tubes, called a calandria, through which wort is pumped.
At the end of the boil, solid particles in the hopped wort are separated out, usually in a vessel called a "whirlpool" or "settling tank". The whirlpool was devised by the Molson Brewery in 1960 to utilise the so-called tea leaf paradox to force the denser solids known as "trub" (coagulated proteins, vegetable matter from hops) into a cone in the centre of the whirlpool tank. Whirlpool systems vary: smaller breweries tend to use the brew kettle, larger breweries use a separate tank, and design will differ, with tank floors either flat, sloped, conical or with a cup in the centre. The principle in all is that by swirling the wort the centripetal force will push the trub into a cone at the centre of the bottom of the tank, where it can be easily removed.
A hopback is a traditional additional chamber that acts as a sieve or filter by using whole hops to clear debris (or "trub") from the unfermented (or "green") wort, as the whirlpool does, and also to increase hop aroma in the finished beer. It is a sealed chamber between the brewing kettle and counter-flow wort chiller. Hops are added to the chamber, the hot wort from the kettle is run through it, and then immediately cooled in the wort chiller before entering the fermentation chamber. Because it is a sealed chamber it facilitates maximum retention of volatile hop aroma compounds that would normally be driven off when the hops contact the hot wort. While a hopback has the same filtering effect as a whirlpool, it operates differently: a whirlpool uses centrifugal forces, a hopback uses a layer of whole hops to act as a filter bed. Furthermore, while a whirlpool is useful only for the removal of pelleted hops (as flowers do not tend to separate as easily), in general hopbacks are used only for the removal of whole flower hops (as the particles left by pellets tend to make it through the hopback). The hopback has mainly been substituted in modern breweries by the whirlpool.
After the whirlpool, the wort must be brought down to fermentation temperatures (20–26°Celsius) before yeast is added. In modern breweries this is achieved through a plate heat exchanger. A plate heat exchanger has many ridged plates, which form two separate paths. The wort is pumped into the heat exchanger, and goes through every other gap between the plates. The cooling medium, usually water, goes through the other gaps. The ridges in the plates ensure turbulent flow. A good heat exchanger can drop 95 °C wort to 20 °C while warming the cooling medium from about 10 °C to 80 °C. The last few plates often use a cooling medium which can be cooled to below the freezing point, which allows a finer control over the wort-out temperature, and also enables cooling to around 10 °C. After cooling, oxygen is often dissolved into the wort to revitalize the yeast and aid its reproduction.
While boiling, it is useful to recover some of the energy used to boil the wort. On its way out of the brewery, the steam created during the boil is passed over a coil through which unheated water flows. By adjusting the rate of flow, the output temperature of the water can be controlled. This is also often done using a plate heat exchanger. The water is then stored for later use in the next mash, in equipment cleaning, or wherever necessary. Another common method of energy recovery takes place during the wort cooling. When cold water is used to cool the wort in a heat exchanger, the water is significantly warmed. In an efficient brewery, cold water is passed through the heat exchanger at a rate set to maximize the water's temperature upon exiting. This now-hot water is then stored in a hot water tank.
Fermentation takes place in fermentation vessels which come in various forms, from enormous cylindroconical vessels, through open stone vessels, to wooden vats. After the wort is cooled and aerated – usually with sterile air – yeast is added to it, and it begins to ferment. It is during this stage that sugars won from the malt are converted into alcohol and carbon dioxide, and the product can be called beer for the first time.
Most breweries today use cylindroconical vessels, or CCVs, which have a conical bottom and a cylindrical top. The cone's aperture is typically around 60°, an angle that will allow the yeast to flow towards the cone's apex, but is not so steep as to take up too much vertical space. CCVs can handle both fermenting and conditioning in the same tank. At the end of fermentation, the yeast and other solids which have fallen to the cone's apex can be simply flushed out of a port at the apex. Open fermentation vessels are also used, often for show in brewpubs, and in Europe in wheat beer fermentation. These vessels have no tops, which makes harvesting top-fermenting yeasts very easy. The open tops of the vessels make the risk of infection greater, but with proper cleaning procedures and careful protocol about who enters fermentation chambers, the risk can be well controlled. Fermentation tanks are typically made of stainless steel. If they are simple cylindrical tanks with beveled ends, they are arranged vertically, as opposed to conditioning tanks which are usually laid out horizontally. Only a very few breweries still use wooden vats for fermentation as wood is difficult to keep clean and infection-free and must be repitched more or less yearly.
There are three main fermentation methods, warm, cool and wild or spontaneous. Fermentation may take place in open or closed vessels. There may be a secondary fermentation which can take place in the brewery, in the cask or in the bottle.
Brewing yeasts are traditionally classed as "top-cropping" (or "top-fermenting") and "bottom-cropping" (or "bottom-fermenting"). Yeast were termed top or bottom cropping, because in traditional brewing yeast was collected from the top or bottom of the fermenting wort to be reused for the next brew. This terminology is somewhat inappropriate in the modern era; after the widespread application of brewing mycology it was discovered that the two separate collecting methods involved two different yeast species that favoured different temperature regimes, namely Saccharomyces cerevisiae in top-cropping at warmer temperatures and Saccharomyces pastorianus in bottom-cropping at cooler temperatures. As brewing methods changed in the 20th century, cylindro-conical fermenting vessels became the norm and the collection of yeast for both Saccharomyces species is done from the bottom of the fermenter, thus the method of collection no longer implies a species association. There are a few remaining breweries who collect yeast in the top-cropping method, such as Samuel Smiths brewery in Yorkshire, Marstons in Staffordshire and several German hefeweizen producers.
For both types, yeast is fully distributed through the beer while it is fermenting, and both equally flocculate (clump together and precipitate to the bottom of the vessel) when fermentation is finished. By no means do all top-cropping yeasts demonstrate this behaviour, but it features strongly in many English yeasts that may also exhibit chain forming (the failure of budded cells to break from the mother cell), which is in the technical sense different from true flocculation. The most common top-cropping brewer's yeast, Saccharomyces cerevisiae, is the same species as the common baking yeast. However, baking and brewing yeasts typically belong to different strains, cultivated to favour different characteristics: baking yeast strains are more aggressive, in order to carbonate dough in the shortest amount of time; brewing yeast strains act slower, but tend to tolerate higher alcohol concentrations (normally 12–15% abv is the maximum, though under special treatment some ethanol-tolerant strains can be coaxed up to around 20%). Modern quantitative genomics has revealed the complexity of Saccharomyces species to the extent that yeasts involved in beer and wine production commonly involve hybrids of so-called pure species. As such, the yeasts involved in what has been typically called top-cropping or top-fermenting ale may be both Saccharomyces cerevisiae and complex hybrids of Saccharomyces cerevisiae and Saccharomyces kudriavzevii. Three notable ales, Chimay, Orval and Westmalle, are fermented with these hybrid strains, which are identical to wine yeasts from Switzerland.
In general, yeasts such as Saccharomyces cerevisiae are fermented at warm temperatures between 15 and 20 °C (59 and 68 °F), occasionally as high as 24 °C (75 °F), while the yeast used by Brasserie Dupont for saison ferments even higher at 29 to 35 °C (84 to 95 °F). They generally form a foam on the surface of the fermenting beer, as during the fermentation process its hydrophobic surface causes the flocs to adhere to CO2 and rise; because of this, they are often referred to as "top-cropping" or "top-fermenting" – though this distinction is less clear in modern brewing with the use of cylindro-conical tanks. Generally, warm-fermented beers are ready to drink within three weeks after the beginning of fermentation, although some brewers will condition them for several months.
Lager is beer that has been cool fermented at around 10 °C (50 °F) (compared to typical warm fermentation temperatures of 18 °C (64 °F)), then stored for around 30 days at temperatures close to freezing point; during this storage sulphur components developed during fermentation dissipate. Though it is the cool fermentation that defines lager, the main technical difference with lager yeast, Saccharomyces pastorianus, is its divergent genome and its ability to metabolize both melibiose, a disaccharide of galactose and glucose and raffinose (a trisaccharide composed of the sugars galactose, fructose, and glucose).[clarification needed] Ale yeasts, Saccharomyces cerevisiae, can only partially metabolize raffinose and cannot metabolize melibiose at all. Nonetheless, these sugars are not present in typical beer wort made from malted barley and their metabolism or lack of it will not affect the subsequent beer organoleptic qualities in any way.
Brewers in Bavaria had for centuries been selecting cold-fermenting yeasts by storing ("lagern") their beers in cold alpine caves. The process of natural selection meant that the wild yeasts that were most cold tolerant would be the ones that would remain actively fermenting in the beer that was stored in the caves. A sample of these Bavarian yeasts was sent from the Spaten brewery in Munich to the Carlsberg brewery in Copenhagen in 1845 who began brewing with it. In 1883 Emile Hansen completed a study on pure yeast culture isolation and the pure strain obtained from Spaten went into industrial production in 1884 as Carlsberg yeast No 1. Another specialized pure yeast production plant was soon installed at the Heineken Brewery in Rotterdam the following year and together they began supply of pure cultured yeast to brewers across Europe. This yeast strain was originally classified as Saccharomyces carlsbergensis a now defunct species name which has been superseded by the currently accepted taxonomic classification Saccharomyces pastorianus.
Today, lagers represent the vast majority of beers produced. Examples include Budweiser Budvar, Birra Moretti, Stella Artois, Red Stripe, and Singha. Some lagers are marketed as Pilsner, which originated in Pilsen, Czech Republic (Plzeň in Czech).[clarification needed]
Lager yeast normally ferments at a temperature of approximately 5 °C (41 °F). Lager yeast can be fermented at a higher temperature normally used for top-fermenting yeast, and this application is often used in a beer style known as California Common or colloquially as "steam beer".
Lambic beers are historically brewed in Brussels and the nearby Pajottenland region of Belgium without any yeast inoculation. They are fermented in oak barrels with the resident microbiota present in the wood and can take up to 2 years to come into condition for sale. However, with the advent of yeast banks and the National Collection of Yeast Cultures, brewing these beers – albeit not through spontaneous fermentation – is possible anywhere. Specific bacteria cultures are also available to reproduce certain styles. Brettanomyces is a genus of yeast important in brewing lambic, a beer produced not by the deliberate addition of brewer's yeasts, but by spontaneous fermentation with wild yeasts and bacteria.
After an initial or primary fermentation, beer is conditioned, matured or aged, in one of several ways, which can take from 2 to 4 weeks, several months, or several years, depending on the brewer's intention for the beer. The beer is usually transferred into a second container, so that it is no longer exposed to the dead yeast and other debris (also known as "trub") that have settled to the bottom of the primary fermenter. This prevents the formation of unwanted flavours and harmful compounds such as acetylaldehyde.
Kräusening is a conditioning method in which fermenting wort is added to the finished beer. The active yeast will restart fermentation in the finished beer, and so introduce fresh carbon dioxide; the conditioning tank will be then sealed so that the carbon dioxide is dissolved into the beer producing a lively "condition" or level of carbonation. The kräusening method may also be used to condition bottled beer.
Lagers are stored at near freezing temperatures for 1–6 months while still on the yeast. The process of storing, or conditioning, or maturing, or aging a beer at a low temperate for a long period is called "lagering", and while it is associated with lagers, the process may also be done with ales, with the same results – that of cleaning up various chemicals, acids and compounds.
- Secondary fermentation
During secondary fermentation, most of the remaining yeast will settle to the bottom of the second fermenter, yielding a less hazy product.
- Bottle fermentation
Some beers undergo a fermentation in the bottle, giving natural carbonation. This may be a second or third fermentation. They are bottled with a viable yeast population in suspension. If there is no residual fermentable sugar left, sugar or wort or both may be added in a process known as priming. The resulting fermentation generates CO2 that is trapped in the bottle, remaining in solution and providing natural carbonation. Bottle-conditioned beers may be either filled unfiltered direct from the fermentation or conditioning tank, or filtered and then reseeded with yeast.
- Cask conditioning
Cask ale or cask-conditioned beer is unfiltered and unpasteurised beer that is conditioned (including secondary fermentation) and served from a cask, either pumped up from a cellar via a beer engine (hand pump), or from a tap by gravity. Sometimes a cask breather is used to keep the beer fresh by allowing carbon dioxide to replace oxygen as the beer is drawn off the cask. The term "real ale" as used by the Campaign for Real Ale (CAMRA) refers to beer "served without the use of extraneous carbon dioxide", which would disallow the use of a cask breather.
|This section does not cite any sources. (April 2012)|
Filtering the beer stabilizes the flavour, and gives beer its polished shine and brilliance. Not all beer is filtered. When tax determination is required by local laws, it is typically done at this stage in a calibrated tank. There are several forms of filters, they may be in the form of sheets or "candles", or they may be a fine powder such as diatomaceous earth, also called kieselguhr. The powder is added to the beer and recirculated past screens to form a filtration bed.
Filters range from rough filters that remove much of the yeast and any solids (e.g., hops, grain particles) left in the beer, to filters tight enough to strain colour and body from the beer. Filtration ratings are divided into rough, fine, and sterile. Rough filtration leaves some cloudiness in the beer, but it is noticeably clearer than unfiltered beer. Fine filtration removes almost all cloudiness. Sterile filtration removes almost all microorganisms.
- Sheet (pad) filters
These filters use sheets that allow only particles smaller than a given size to pass through. The sheets are placed into a filtering frame, sanitized (with boiling water, for example) and then used to filter the beer. The sheets can be flushed if the filter becomes blocked. The sheets are usually disposable and are replaced between filtration sessions. Often the sheets contain powdered filtration media to aid in filtration.
Pre-made filters have two sides. One with loose holes, and the other with tight holes. Flow goes from the side with loose holes to the side with the tight holes, with the intent that large particles get stuck in the large holes while leaving enough room around the particles and filter medium for smaller particles to go through and get stuck in tighter holes.
Sheets are sold in nominal ratings, and typically 90% of particles larger than the nominal rating are caught by the sheet.
- Kieselguhr filters
Packaging is putting the beer into the containers in which it will leave the brewery. Typically, this means putting the beer into bottles, aluminium cans and kegs/casks, but it may include putting the beer into bulk tanks for high-volume customers.
Brewing by-products are "spent grain" and the sediment (or "dregs") from the filtration process which may be dried and resold as "brewers dried yeast" for poultry feed, or made into yeast extract.
- Yeast extract
- Spent grain
Brewer's spent grain (also called spent grain, brewer's grain or draff) consists of the residue of malt and grain which remains in the mash-kettle after the mashing and lautering process. It consists primarily of grain husks, pericarp, and fragments of endosperm. As it mainly consists of carbohydrates and proteins, and is readily consumed by animals, spent grain is used in animal feed. Spent grains can also be used as fertilizer, whole grains in bread, as well as in the production of biogas. Spent grain is also an ideal medium for growing mushrooms, such as shiitake, and already some breweries are either growing their own mushrooms or supplying spent grain to mushroom farms. Spent grains can be used in the production of red bricks, to improve the open porosity and reduce thermal conductivity of the ceramic mass.
The brewing industry is a global business, consisting of several dominant multinational companies and many thousands of smaller producers known as microbreweries or regional breweries depending on size and region. More than 133 billion liters (3.5×1010 U.S. gallons; 2.9×1010 imperial gallons) are sold per year—producing total global revenues of $294.5 billion (£147.7 billion) as of 2006. SABMiller became the largest brewing company in the world when it acquired Royal Grolsch, brewer of Dutch premium beer brand Grolsch. InBev was the second-largest beer-producing company in the world and Anheuser-Busch held the third spot, but after the acquisition of Anheuser-Busch by InBev, the new Anheuser-Busch InBev company is currently the largest brewer in the world.
Brewing at home is subject to regulation and prohibition in many countries. Restrictions on homebrewing were lifted in the UK in 1963, Australia followed suit in 1972, and the USA in 1978, though individual states were allowed to pass their own laws limiting production.
- Chris Boulton (20 May 2013). Encyclopaedia of Brewing. John Wiley & Sons. p. 111.
- John P. Arnold (2005) . Origin and History of Beer and Brewing: From Prehistoric Times to the Beginning of Brewing Science and Technology. Cleveland, Ohio: BeerBooks. p. 34. ISBN 978-0-9662084-1-2. OCLC 71834130.
- Louis F Hartman and A. L. Oppenheim (December 1950). "On Beer and Brewing Techniques in Ancient Mesopotamia". Supplement to the Journal of the American Oriental Society. 10.
- alabev.com The Ingredients of Beer. Retrieved 29 September 2008
- beer-brewing.com Ted Goldammer, The Brewers Handbook, Chapter 6 – Beer Adjuncts, Apex Pub (1 January 2000), ISBN 0-9675212-0-3. Retrieved 29 September 2008
- BeerHunter.com Michael Jackson, A good beer is a thorny problem down Mexico way, What's Brewing, 1 October 1997. Retrieved 29 September 2008
- Max Nelson (2005). The barbarian's beverage: a history of beer in ancient Europe. London: Routledge. p. 6. ISBN 978-0-415-31121-2. OCLC 58387214.
- "Beer". Britannica.com.
- Mirsky, Steve (May 2007). "Ale's Well with the World". Scientific American. Retrieved 4 November 2007.
- Dornbusch, Horst (27 August 2006). "Beer: The Midwife of Civilization". Assyrian International News Agency. Retrieved 4 November 2007.
- Protz, Roger (2004). "The Complete Guide to World Beer".
When people of the ancient world realised they could make bread and beer from grain, they stopped roaming and settled down to cultivate cereals in recognisable communities.
- "Barley Beer". University of Pennsylvania Museum of Archaeology and Anthropology. Retrieved 21 June 2011.
-  Prehistoric brewing: the true story, 22 October 2001, Archaeo News. Retrieved 13 September 2008
-  Dreher Breweries, Beer-history
- Cornell, Martyn (2003). Beer: The Story of the Pint. Headline. ISBN 0-7553-1165-5. Cite error: Invalid
<ref>tag; name "sotp" defined multiple times with different content
- "Industry Browser – Consumer Non-Cyclical – Beverages (Alcoholic) – Company List". Yahoo! Finance. Retrieved 5 November 2007. Cite error: Invalid
<ref>tag; name "market" defined multiple times with different content
- "Beer: Global Industry Guide". Research and Markets. Retrieved 5 November 2007.
- Marty Nachel (31 March 2008). Homebrewing For Dummies. John Wiley & Sons. p. 51. ISBN 9781118052440. Retrieved 18 April 2012.
- "Geology and Beer". Geotimes. August 2004. Retrieved 5 November 2007.
-  Michael Jackson, BeerHunter, 19 October 1991, Brewing a good glass of water. Retrieved 13 September 2008
- Wikisource 1911 Encyclopædia Britannica/Brewing/Chemistry. Retrieved 29 September 2008
- Farm-direct Oz, Barley Malt, 6 February 2002. Retrieved 29 September 2008
- Carolyn Smagalski (2006). "CAMRA & The First International Gluten Free Beer Festival". Carolyn Smagalski, Bella Online.
- "University of Minnesota Libraries: The Transfer of Knowledge. Hops-''Humulus lupulus''". Lib.umn.edu. 13 May 2008. Retrieved 20 May 2012.
- Gil Marks (2012). Encyclopedia of Jewish Food. books.google.co.uk. ISBN 9780470943540. Retrieved 31 July 2012.
- Richard W. Unger (2007). Beer in the Middle Ages and the Renaissance. University of Pennsylvania Press. p. 54. ISBN 0812203747. Retrieved 1 August 2012.
- Ian S Hornsey (22 December 2003). A History of Beer and Brewing. Royal Society of Chemistry. pp. 534–535. ISBN 9780854046300. Retrieved 1 August 2012.
- Sandor Ellix Katz, Michael Pollan (14 May 2012). The Art of Fermentation. Chelsea Green Publishing. p. 274. ISBN 9781603583640. Retrieved 1 August 2012.
- "Heatherale.co.uk". Fraoch.com. Archived from the original on 29 June 2008. Retrieved 28 September 2008.
- "La Brasserie Lancelot est située au coeur de la Bretagne, dans des bâtiments rénovés de l'ancienne mine d'Or du Roc St-André, construits au XIXe siècle sur des vestiges néolithiques". Brasserie-lancelot.com. Retrieved 28 September 2008.
- Neelima Garg, K. L. Garg, K. G. Mukerji (1 March 2010). Laboratory Manual of Food Microbiology. I. K. International Pvt Ltd. p. 177. ISBN 9789380578019. Retrieved 1 August 2012.
- Dan Rabin, Carl Forget (1998). The Dictionary of Beer and Brewing. Taylor & Francis.
- Chris Boulton (20 May 2013). Encyclopaedia of Brewing. John Wiley & Sons. p. 317.
- A. Chaston Chapman (22 Mar 2012). Brewing. Cambridge University Press. pp. 51–54.
- , A better control of beer properties by predicting acidity of hop iso-α-acids, Blanco Carlos A.; Rojas Antonio; Caballero Pedro A.; Ronda Felicidad; Gomez Manuel; Caballero. Retrieved 13 September 2008
- A. H. Burgess (1964). Hops: Botany, Cultivation and Utilization. Leonard Hill. ISBN 0-471-12350-1.
- Ostergaard, S., Olsson, L., Nielsen, J., Metabolic Engineering of Saccharomyces cerevisiae, Microbiol. Mol. Biol. Rev. 2000 64: 34–50
- Ian Spencer Hornsey (25 November 1999). Brewing. Royal Society of Chemistry. pp. 221–222.
- Web.mst.edu David Horwitz, Torulaspora delbrueckii. Retrieved 30 September 2008
- Ian S Hornsey (22 December 2003). A History of Beer and Brewing. Royal Society of Chemistry. pp. 601–604. ISBN 9780854046300. Retrieved 1 August 2012.
- Michael Lewis, Tom W. Young (31 October 2002). Brewing. Springer. p. 280. ISBN 9780306472749. Retrieved 1 August 2012.
- "Michael Jackson's Beer Hunter – A pint of cloudy, please". Beerhunter.com. Retrieved 28 September 2008.
- EFSA Opinion of the Scientific Panel on Dietetic Products, Nutrition and Allergies, 23 August 2007. Retrieved 29 September 2008
- Food.gov.uk Draft Guidance on the Use of the Terms ‘Vegetarian’ and ‘Vegan’ in Food Labelling: Consultation Responses pp71, 5 October 2005. Retrieved 29 September 2008
- Roger Protz (15 March 2010). "Fast Cask". Retrieved 19 June 2010.
- Yiu H. Hui (2006). Handbook of Food Science, Technology, And Engineering. CRC Press. p. 383. ISBN 9780849398490. Retrieved 18 April 2012.
- John Hall, Wolfgang David Lindell (7 October 2011). The Oxford Companion to Beer. Oxford University Press. p. 563. ISBN 9780195367133. Retrieved 18 April 2012.
- Amitava Dasgupta (16 April 2011). The Science of Drinking: How Alcohol Affects Your Body and Mind. Rowman & Littlefield. p. 6. ISBN 9781442204119. Retrieved 18 April 2012.
- John Hall, Wolfgang David Lindell (7 October 2011). The Oxford Companion to Beer. Oxford University Press. p. 564. ISBN 9780195367133. Retrieved 18 April 2012.
- Michael J. Lewis, Tom W. Young (31 October 2002). Brewing. Springer. p. 176.
- "Ale University – Brewing Process". Merchant du Vin,. 2009. Retrieved 12 November 2009.
- Ted Goldammer (1 October 2008). The Brewer's Handbook: The Complete Book To Brewing Beer (2nd ed.). Apex. ISBN 0-9675212-3-8.
- "History of Beer". Foster's Group. July 2005.
- I. Hornsey (2004). A History of Beer and Brewing (1st ed.). Washington D.C.: Royal Society of Chemistry. ISBN 0-85404-630-5.
- Garrett Oliver (7 October 2011). The Oxford Companion to Beer. Oxford University Press. p. 176. ISBN 9780195367133. Retrieved 30 July 2012.
- Michael Lewis, Tom W. Young (31 October 2002). Brewing. Springer. p. 306. ISBN 9780306472749. Retrieved 30 July 2012.
- Matthew Schaefer (15 February 2012). The Illustrated Guide to Brewing Beer. Skyhorse Publishing Inc. p. 197. ISBN 9781616084639. Retrieved 13 November 2012.
- Rachel Black (14 October 2010). Alcohol in Popular Culture: An Encyclopedia. ABC-CLIO. p. 41. ISBN 9780313380488. Retrieved 13 November 2012.
- The Saturday Magazine (September 1835). "The Useful Arts No. X". The Saturday Magazine: 120. Retrieved 13 November 2012.
- Audrey Ensminger (1994). Foods and Nutrition Encyclopedia. CRC Press. p. 188. ISBN 0-8493-8980-1.
- Dan Rabin (1998). The Dictionary of Beer and Brewing. Taylor & Francis. p. 180. ISBN 1-57958-078-5.
- "Abdijbieren. Geestrijk erfgoed" by Jef Van den Steen
- "Bier brouwen". Web.archive.org. 19 April 2008. Archived from the original on 19 April 2008. Retrieved 15 December 2011.
- "What is mashing?". Realbeer.com. Retrieved 15 December 2011.
- Kunze, Wolfgang (2004) "Technology Brewing and Malting" VLB Berlin, ISBN 3-921690-49-8 pp. 214–218
- Hui & Smith 2004
- "Lauter Tun Use in Brewing Beer". beer-brewing.com. Retrieved 31 March 2010.
- Goldhammer, T. (2008) The Brewer's Handbook, 2nd edition, Apex, ISBN 978-0-9675212-3-7 pp 181 ff.
- "Mash Filter Use in Brewing Beer". beer-brewing.com. Retrieved 31 March 2010.
- Richard W. Unger (2007). Beer in the Middle Ages and the Renaissance. University of Pennsylvania Press. p. 5. ISBN 0812203747. Retrieved 15 November 2012.
- Mark Denny (6 May 2009). Froth!: The Science of Beer. JHU Press. p. 63. ISBN 9780801895692. Retrieved 15 November 2012.
- Charles W. Bamforth (9 September 2011). The Oxford Companion to Beer. pp. 141–142. ISBN 9780195367133. Retrieved 15 November 2012.
- Michael J. Lewis, Charles W. Bamforth (4 October 2006). Essays in Brewing Science. Springer. p. 47. ISBN 9780387330105. Retrieved 15 November 2012.
- Michael Lewis, Tom W. Young (2002). Brewing. Springer. p. 272.
- Tim Hampson (9 September 2011). The Oxford Companion to Beer. Oxford University Press. p. 201.
- Ray Klimovitz (9 September 2011). The Oxford Companion to Beer. Oxford University Press. p. 841.
- Charles Bamforth (6 March 2009). Beer: Tap into the Art and Science of Brewing. Oxford University Press. p. 73.
- Tom W. Young (1982). Malting and Brewing Science: Hopped Wort and Beer. Springer. pp. 517–518.
- Greg Duncan Powell (2010). Beer: A Gauge for Enthusiasts. Allen & Unwin. p. 25.
- Chad Michael Yakobson (9 Sep 2011). The Oxford Companion to Beer. Oxford University Press. p. 540.
- Ian Hornsey (2013). Brewing. Royal Society of Chemistry. p. 127.
- Peter Mathias (1 Jan 1990). The Brewing Industry: A Guide to Historical Records. Manchester University Press. p. 23.
- J.S. Hough, D.E. Briggs, R. Stevens, Tom W. Young (31 August 1982). Malting and Brewing Science: Hopped Wort and Beer. books.google.co.uk. Springer. pp. 516–517. ISBN 9780834216846. Retrieved 31 July 2012.
- Paul Buttrick (9 Sep 2011). The Oxford Companion to Beer. Oxford University Press. p. 453.
- Kunze, Wolfgang (2004) "Technology Brewing and Malting" VLB Berlin, ISBN 3-921690-49-8, p.302
- Anders Brinch Kissmeyer, Garrett Oliver (9 Sep 2011). "Fermentation vessels". The Oxford Companion to Beer. Oxford University Press. pp. 347–351.
- Chris Boulton (20 May 2013). Encyclopaedia of Brewing. John Wiley & Sons. p. 236.
- Chris Boulton, David Quain (25 Apr 2013). Brewing Yeast and Fermentation. John Wiley & Sons. p. 294.
- Priest & Stewart 2006, p. 84
- Tom Colicchio (2011). The Oxford Companion to Beer. Oxford University Press.
- Emil Christian Hansen (1896). Practical studies in fermentation: being contributions to the life history of micro-organisms. E. & FN Spon.
- Charles W. Bamforth, Chris White (9 Sep 2011). The Oxford Companion to Beer. Oxford University Press. p. 331.
- González, Sara S., Eladio Barrio, and Amparo Querol. "Molecular characterization of new natural hybrids of Saccharomyces cerevisiae and S. kudriavzevii in brewing." Applied and environmental microbiology 74.8 (2008): 2314–2320.
- Lea, Piggott & Howard 2003, pp. 43–44
- Farmhouse Ales: Culture and Craftsmanship in the European Tradition, pages 168–173, Phil Markowski, Brewers Publications (2004), ISBN 0-937381-84-5
- Lea, Piggott & Howard 2003, p. 42
- Charles W. Bamforth (2005). Food, Fermentation and Micro-organisms. Wiley-Blackwell. p. 66. ISBN 0-632-05987-7.
- Briggs, Dennis Edward, et al. Brewing: science and practice. Elsevier, 2004. pp 123 table 4.16
- Meussdoerffer, Franz G. "A comprehensive history of beer brewing." Handbook of brewing: processes, technology, markets (2009): 1–42.
- Boulton, Christopher, and David Quain. Brewing yeast and fermentation. John Wiley & Sons, 2008.
- Bill Taylor (9 September 2011). The Oxford Companion to Beer. Oxford University Press. p. 536. ISBN 9780199912100. Retrieved 14 June 2013.
- Garrett Oliver (19 October 2010). The Brewmaster's Table. HarperCollins. p. 62. ISBN 9780062042835. Retrieved 14 June 2013.
- Spitaels, Freek, et al. "The Microbial Diversity of Traditional Spontaneously Fermented Lambic Beer." PloS one 9.4 (2014): e95384.
- Verachtert H, Iserentant D. (1995). "Properties of Belgian acid beers and their microflora. 1. The production of gueuze and related refreshing acid beers". Cerevesia. 20 (1): 37–42.
- F. G. Priest, Graham G. Stewart (22 February 2006). Handbook of Brewing. CRC Press. p. 86. ISBN 9780824726577. Retrieved 16 July 2012.
- Ian Spencer Hornsey (25 November 1999). Brewing. Royal Society of Chemistry. p. 141. ISBN 9780854045686. Retrieved 16 July 2012.
- F. G. Priest, Graham G. Stewart (22 February 2006). Handbook of Brewing. CRC Press. p. 308. ISBN 9780824726577. Retrieved 16 July 2012.
- Keith Thomas (7 October 2011). The Oxford Companion to Beer. Oxford University Press. ISBN 9780195367133. Retrieved 16 July 2012.
- Briggs, D.E.; Boulton, C.A.; Brookes, P. A.; and Stevens, R. Brewing, 2004, CRC. ISBN 0-8493-2547-1 p. 5.
- Horst Dornbusch (9 September 2011). "Lagering". The Oxford Companion to Beer. Oxford University Press. pp. 533–534. ISBN 9780195367133. Retrieved 8 April 2013.
- Priest & Stewart 2006, p. 532
- Christopher M. Boulton (20 May 2013). Encyclopaedia of Brewing. Wiley. p. 79. Retrieved 14 June 2013.
- Christopher M. Boulton (20 May 2013). Encyclopaedia of Brewing. Wiley. p. 80. Retrieved 14 June 2013.
- Ian Spencer Hornsey (1 January 1999). Brewing. Royal Society of Chemistry. pp. 150–151.
- Encyclopaedia of Brewing. John Wiley & Sons. 20 May 2013. p. 150.
- "What is Real Ale?". camra.org.uk. Retrieved 13 March 2014.
- Pete Brown (11 August 2011). Man Walks into a Pub. Pan Macmillan. p. 299.
- Robert Blair (2008). Nutrition and Feeding of Organic Poultry. CABI. p. 79. Retrieved 8 April 2013.
- Charles Bamforth (6 March 2009). Beer: Tap into the Art and Science of Brewing. Oxford University Press. p. 174. ISBN 9780199756360. Retrieved 8 April 2013.
- Frances R. Frankenburg (2009). Vitamin discoveries and disasters: history, science, and controversies. ABC-CLIO. p. 58. ISBN 9780313354755. Retrieved 8 April 2013.
- G. Beldman, J. Hennekam, A. G. J. Voragen (18 February 2004). "Enzymatic hydrolysis of beer brewers' spent grain and the influence of pretreatments". 30 (5). Biotechnology and Bioengineering: 668–671. Retrieved 21 March 2010.
- Forssell Pirkko; et al. (2008). "Hydrolysis of Brewers' Spent Grain by Carbohydrate Degrading Enzymes" (PDF). Journal of the Institute of Brewing. 114 (4): 306–314. doi:10.1002/j.2050-0416.2008.tb00774.x. Retrieved 21 March 2009.
- "Brewers grains, Wet brewers grains, Dried brewers grains, Brewers spent grain, Brewers Dried Yeast". Food and Agriculture Organization of the United Nations. Retrieved 21 March 2010.
- Peter Reinhart (1 September 2007). Peter Reinhart's Whole Grain Breads: New Techniques, Extraordinary Flavor. Ten Speed Press. pp. 205–209. ISBN 1-58008-759-0.
- "Storm Brewing – a Canadian brewery that grows shiitake mushrooms on spent grain". Stormbrewing.ca. Retrieved 4 September 2013.
- Ferraz et al., Spent brewery grains for improvement of thermal insulation of ceramic bricks. Journal of Materials in Civil Engineering. DOI: 10.1061/(ASCE)MT.1943-5533.0000729
- "Market Segments: Microbrewery". Brewers Association. 2012. Retrieved 21 June 2012.
- "Beer: Global Industry Guide". Research and Markets. Archived from the original on 11 October 2007. Retrieved 5 November 2007.
- "Brewer to snap up Miller for $5.6B". CNN. 30 May 2002. Archived from the original on 7 December 2007. Retrieved 4 November 2007.
- "InBev Completes Acquisition of Anheuser-Busch" (PDF) (Press release). AB-InBev. 18 November 2008. Retrieved 21 June 2012.
- "New Statesman – What's your poison?". newstatesman.com. Retrieved 10 November 2010.
- "Adelaide Times Online". Archived from the original on 20 August 2006. Retrieved 10 October 2006.
- Papazian The Complete Joy of Homebrewing (3rd Edition), ISBN 0-06-053105-3
- Bamforth, Charles W.; "Food, Fermentation and Micro-organisms", Wiley-Blackwell, 2005, ISBN 0-632-05987-7
- Boulton, Christopher; Encyclopaedia of Brewing, Wiley-Blackwell, 2013, ISBN 978-1-4051-6744-4
- Briggs, Dennis E., et al.; "Malting and Brewing Science", Aspen Publishers, 1982, ISBN 0-8342-1684-1
- Ensminger, Audrey; "Foods & Nutrition Encyclopedia", CRC Press, 1994, ISBN 0-8493-8980-1
- Esslinger, Hans Michael; "Handbook of Brewing: Processes, Technology, Markets", Wiley-VCH, 2009, ISBN 3-527-31674-4
- Hornsey, Ian Spencer; "Brewing", Royal Society of Chemistry, 1999, ISBN 0-85404-568-6
- Hui, Yiu H.; "Food Biotechnology", Wiley-IEEE, 1994, ISBN 0-471-18570-1
- Hui, Yiu H.; "Food Processing: Principles and Applications", Wiley-Blackwell, 2004, ISBN 978-0-8138-1942-6
- Lea, Andrew, et al.; Fermented Beverage Production, Kluwer Academic/Plenum Publishers, 2003, ISBN 0-306-47706-8
- McFarland, Ben; World's Best Beers, Sterling Publishing, 2009, ISBN 978-1-4027-6694-7
- Oliver, Garrett (ed); The Oxford Companion to Beer, Oxford University Press, 2011
- Priest, Fergus G.; "Handbook of Brewing", CRC Press, 2006, ISBN 0-8247-2657-X
- Rabin, Dan; Forget, Carl (1998). The Dictionary of Beer and Brewing (Print). Chicago: Fitzroy Dearborn/Taylor & Francis. ISBN 1-57958-078-5.
- Stevens, Roger, et al.; "Brewing: Science and Practice", Woodhead Publishing, 2004, ISBN 0-8493-2547-1
- Unger, Richard W.; "Beer in the Middle Ages and the Renaissance", University of Pennsylvania Press, 2004, ISBN 0-8122-3795-1
|Look up brewing in Wiktionary, the free dictionary.|
|Wikimedia Commons has media related to Beer-brewing.|