British Railways DP1

English Electric DELTIC prototype

DP1 at the Ribble Steam Railway in 2015

Type and origin Power type Diesel-electric Builder English Electric at Dick, Kerr & Co Works, Preston Serial number EE: 2003 Build date 1955

Specifications UIC class Co'Co' Gauge 4 ft 8 1⁄2 in (1,435 mm) standard gauge Wheel diameter 3 ft 7 in (1,092 mm) Loco weight 106 long tons (108 t; 119 short tons) Prime mover Napier Deltic D18-25 (2 off) Traction motors EE 526/A, 6 off Cylinders 18 × 2 Transmission Diesel Electric Train heating Stone-Vapor/Clarkson steam generator

Performance figures Maximum speed 90 mph (140 km/h) 106 mph (171 km/h) from 1956 Power output 3,300 hp (2,500 kW) Tractive effort 90 mph gearing: 60,000 lbf (266.89 kN) 106 mph gearing: 52,500 lbf (233.53 kN)

Career Operators British Railways Power class Type 5 Numbers DP1 Official name DELTIC Retired March 1961 Disposition Preserved at the National Railway Museum Shildon

English Electric DP1, commonly known as Deltic, was a prototype 3,300 hp (2,500 kW) demonstrator locomotive employing two Napier Deltic engines, built by English Electric in 1955.

The high power of the locomotive at an acceptably low axleload resulted in 22 similar locomotives being ordered by British Railways for use on East Coast Main Line express passenger services; the serial production of which became the British Rail Class 55.

Background and design

The English Electric company, which had absorbed the engine-maker Napier & Son into its group at the instruction of the Ministry of Aircraft Production in 1942, was a major builder of diesel and electric locomotives. The two George Nelsons (Sir George, and his son, known in the works as "Half") saw the potential of Napier's Deltic engine for rail traction and in 1954–1955 built a demonstrator at its Dick, Kerr works in Preston. Officially numbered DP1, its internal project title was Enterprise, and it was intended that the locomotive would carry that name. However, in 1954, before completion, Hudswell Clarke announced a range of small diesel-mechanical locomotives using the same name. After initial trials in 1955, the locomotive received the DELTIC in large cream letters on its sides, and the name became synonymous with the locomotive.

Long aluminium beadings on the sides were painted cream, a visual device to make the locomotive's high sides appear more slender and add to the impression of speed. Three curved chevrons on each nose, in the same cream, added to that effect. To British eyes, the locomotive's styling was reminiscent of American locomotives, such as the EMD E-unit or ALCO PA designs (partly because English Electric initially planned to offer the type for export), with high noses and small, somewhat swept-back cab windows set behind them. To add to the American look of the locomotive, a large headlight was to have been fitted to each nose (the lights were never installed but would have been of the rotating 'Mars Light' type as fitted to North American locomotives of the era). Two 18-cylinder Deltic engines were fitted, derated from the 1,750 horsepower (1.3 MW) of the marine engines in minesweepers to 1,650 horsepower (1.2 MW) each, generating 3,300 horsepower (2.5 MW) total. This derating reduced the stress on the engines, thereby increasing the service life and length of time between overhauls.

Service and testing

DP1 at Harringay station in 1959

The locomotive first saw service on the London Midland Region of British Railways in 1955, generally operating fast London to Liverpool freight trains; it was withdrawn and after modifications re-entered services in 1956. Tests were carried out on the Settle to Carlisle line in August/September 1956, after which it operated passenger trains, The Shamrock and The Merseyside Express, between London and Liverpool, followed by London-Carlisle trains, and in 1957, returning to London-Liverpool trains. The region's chief mechanical and electrical engineer, J.F.Harrison, rejected the design, believing high-speed engines (i.e. 1500rpm) unsuitable for railway applications.

In 1957, Gerry Fiennes, the line traffic manager on the former Great Northern route out of London King's Cross station, was seeking high power locomotives to run services on the East Coast Main Line, having found the 2000 hp English Electric type 4 locomotives produced under the 1955 modernisation plan lacking sufficient power for his planned timings; as a consequence he proposed using 'Deltic' type locomotives on the line. Objections to the order included those arising from: a limited permitted top speed due to the mass of the locomotive; the potential for the order to delay a proposed (1957) electrification scheme of the line; as well the size which required modifications to the King's Cross platforms. An order was placed in 1959 for 22 Class 55s to replace 55 steam locomotives.

Preservation

In March 1961 DP1 was withdrawn after a serious powerplant failure; plans to test it in Canada fell through, and the locomotive was donated in 1963 to the Science Museum, South Kensington and placed on public display.

In October 1993, it was transferred to the National Railway Museum, York. It then moved to the National Railway Museum Shildon. In August 2012 it was loaned to The Ribble Steam Railway in Preston, Lancashire, which is barely a mile away from where it was originally built. It is envisaged that it will remain there until at least October 2015

Models

The Kitmaster company produced an unpowered polystyrene injection moulded model kit for 00 gauge. In late 1962, the Kitmaster brand was sold by its parent company (Rosebud Dolls) to Airfix, who did not release model kits of this locomotive. In time, the Airfix tools passed on to Dapol who rediscovered the moulding tools and have since produced the model kit.

In 2007 model manufacturer Bachmann Branchline and the National Railway Museum announced the release of an OO scale model of the DP1 for sale at the NRM Shop. Bachmann used laser-scanning (see 3D scanner) of the machine at the National Railway Museum Shildon to collect dimensional data of the locomotive. The model was praised for its attention to fine detail and smooth and powerful running. Bachmann released a N-scale model under the Graham Farish brand in 2010.

References

Further reading

• , full work history

External links

• Picture of DP1 on test on S&C line