Broughton Suspension Bridge

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
The rebuilt Broughton suspension bridge in 1883

Broughton Suspension Bridge was an iron chain suspension bridge built in 1826 to span the River Irwell between Broughton and Pendleton, now in Salford, Greater Manchester, England. One of Europe's first suspension bridges, it has been attributed to Samuel Brown, though some suggest it was built by Thomas Cheek Hewes, a Manchester millwright and textile machinery manufacturer.[1][2]

On 12 April 1831, the bridge collapsed, reportedly due to mechanical resonance induced by troops marching in step.[3] As a result of the incident, the British Army issued an order that troops should "break step" when crossing a bridge. Though rebuilt and strengthened, the bridge was subsequently propped with temporary piles whenever crowds were expected. In 1924 it was replaced by a Pratt truss footbridge, still in use.

Construction

In 1826, John Fitzgerald, the wealthy owner of Castle Irwell House (later to become the site of the Manchester Racecourse), built, at his own expense, a 144 feet (44 m) suspension bridge across the River Irwell between Lower Broughton and Pendleton. According to John Marius Wilson's Imperial Gazetteer of England and Wales (1870–72) all users of the bridge were required to pay a pontage to cross.[4] The bridge was a source of great local pride, as the Menai Suspension Bridge had opened only that year and suspension bridges were then considered the "new wonder of the age".[5]

1831 collapse

On 12 April 1831, the 60th Rifle Corps carried out an exercise on Kersal Moor under the command of Lieutenant Percy Slingsby Fitzgerald,[6] the son of John Fitzgerald, Member of Parliament and brother of the poet Edward FitzGerald. As a detachment of 74 men returned to barracks in Salford by way of the bridge,[7] the soldiers, who were marching four abreast, felt it begin to vibrate in time with their footsteps. Finding the vibration a pleasant sensation some of them started to whistle a marching tune, and to "humour it by the manner in which they stepped", causing the bridge to vibrate even more.[7] The head of the column had almost reached the Pendleton side when they heard "a sound resembling an irregular discharge of firearms".[7] Immediately, one of the iron columns supporting the suspension chains on the Broughton side of the river fell towards the bridge, carrying with it a large stone from the pier to which it had been bolted. The corner of the bridge, no longer supported, then fell 16 or 18 feet (4.9 or 5.5 m) into the river, throwing about 40 of the soldiers into the water or against the chains. As the water was only about two feet (60 cm) deep at that point none of the men were killed, but 20 were injured, including six who suffered severe injuries including broken arms and legs, severe bruising, and contusions to the head.[7]

Cause

An investigation found that a bolt in one of the stay-chains had snapped at the point where it was attached to the masonry of the ground anchor. There was criticism of the construction method used, as the attachment to the ground anchor relied on one bolt rather than two, and the bolt was found to have been badly forged.[8] A number of other bolts were also bent but had not broken.[9] It emerged that three years previously the distinguished Engineer, Eaton Hodgkinson FRS, had expressed some doubt about the strength of the stay chains compared with that of the suspension chains. He had said that they should be rigorously tested, but they were not.[7] It also came to light that some time before the accident one of the cross bolts had started to bend and crack, although it was believed to have been replaced by the time of the accident. The conclusion was that, although the vibration caused by the marching had precipitated the bolt's failure, it would have happened anyway.[5]

Aftermath

File:Broughton bridge.jpg
The replacement bridge today.

The collapse of the bridge caused something of a loss of confidence in suspension bridges, with one newspaper report at the time commenting:[7]

<templatestyles src="Template:Blockquote/styles.css" />

From what happened on this occasion we would greatly doubt the stability of the great Menai Bridge (admirable as its construction is), if a thousand men were to be marched across in close column, and keeping regular step. From its great length, the vibration would be tremendous before the head of the column had reached the further side, and some terrific calamity would be very likely to happen.

This did not stop the building of more suspension bridges, and the main consequence of the collapse was that the British Army issued the order to "break step" when soldiers were crossing a bridge.[5][10] French soldiers were also ordered to break step on bridges – nevertheless, marching was cited as a contributing factor to the collapse of the Angers Bridge in France during a storm in 1850 when over 200 soldiers were killed.[11]

Broughton Suspension Bridge was rebuilt and strengthened, but, according to the Imperial Gazetteer of England and Wales (1870–72), it was propped with temporary piles whenever a large crowd was expected.[12] The suspension bridge was eventually replaced by a Pratt truss footbridge, designed by the Borough Engineer at a cost of about £2,300, which was formally opened on 2 April 1924.[13]

See also

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. 5.0 5.1 5.2 Lua error in package.lua at line 80: module 'strict' not found.
  6. London Gazette Issue 18750 published on 26 November 1830. Page 4
  7. 7.0 7.1 7.2 7.3 7.4 7.5 Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. Lua error in package.lua at line 80: module 'strict' not found.
  12. Lua error in package.lua at line 80: module 'strict' not found.
  13. Lua error in package.lua at line 80: module 'strict' not found.

Lua error in package.lua at line 80: module 'strict' not found.