Briare Canal

From Infogalactic: the planetary knowledge core
(Redirected from Canal de Briare)
Jump to: navigation, search
Canal de Briare
Montbouy - 06.jpg
Briare canal in Montbouy
Specifications
Length 57 km (35 mi)
Locks 36
Status Open
History
Construction began 1604
Date completed 1642
Geography
Start point Briare
End point Buges near Montargis
Beginning coordinates Lua error in package.lua at line 80: module 'strict' not found.
Ending coordinates Lua error in package.lua at line 80: module 'strict' not found.
Connects to Canal du Loing and Canal Lateral a la Loire

The Canal de Briare is one of the oldest canals in France. It is the first summit level canal in Europe that was built using pound locks, connecting the Loire and Seine valleys. It is 57 kilometres (35 miles) long and is part of the Bourbonnais route from Saint-Mammès on the Seine to Chalon-sur-Saône on the Saône River.[1][2]

From Briare to Buges, the canal rises through the first 12 locks some 41 m (135 ft) and then falls 85 m (279 ft) through the remaining 24 locks.[3]

Construction

The canal was initiated by Maximilien de Béthune, duc de Sully, with support from Henry IV in order to develop the grain trade, and to reduce food shortages. Its construction started in 1604 and was completed in 1642. Between six and twelve thousand workmen worked on this canal which connects the basins of the River Loire and the River Seine. Hugues Cosnier obtained the contract to build the first canal crossing a watershed in Europe. It was thus necessary to use locks. A staircase of seven locks was built in Rogny-les-Sept-Écluses. (This was bypassed in 1887 but is preserved as an ancient monument and floodlit at night.)

After Henri IV's assassination, Hugues Cosnier had to give up work in 1611. In 1638, Guillaume Boutheroue and Jacques Guyon applied to resume work, and received letters patent from Louis XIII for this purpose. They created with other nobles the "Compagnie des seigneurs du canal de Loyre en Seine" and work was completed by 1642.

Reservoirs were dug to supply the approximately 2000 cubic meters of water displaced at each lock. They include the reservoirs of Turfs, Chesnoy, Grand-rû, Tilery, Du Chateau, Cahauderie, Beaurois, the Bourdon reservoir, and the Moutiers reservoir on the Loing. The original source of water was the Étang de la Gazonne.[4]

Usage

By the mid 18th century more than 500 wine barges were in use bringing wines from the Auvergne, Mâcon, Beaujolais, Sancerre, and Languedoc regions. Other cargoes included firewood, timber, coal and iron, faïence from Nevers and fruit from the Auvergne. All hauling was done by men, generally two to a boat.

Shortages of water in the reservoirs and Loire valley often resulted in 2–3 months closure per year.

Modifications

File:Rogny-les-Sept-Écluses - 10.jpg
Briare canal in Rogny-les-Sept-Écluses. The old seven lock staircase is in the background

The canal was repurchased by the State in 1860.

In periods of drought the canal's reservoirs were insufficient to keep the canal full of water, therefore in 1894 and 1895 a pumping station was built to pump water into the summit pound.

The Briare aqueduct was built over the Loire in Briare between 1890 and 1896 by the engineer Abel Mazoyer to make a connection with the Canal latéral à la Loire (built in the years 1820 and 1830). The Briare aqueduct stands on fourteen piers. These piers support a single metal beam carrying a trough with more than 13,000 tonnes of water, 2.2 meters deep. The width of the aqueduct, towpaths included, is 11.5 meters and its length is 662.7 meters. Eight sluices make it possible to empty the aqueduct in the event of severe freezing.

See also

En route

Briare Canal Map.png

References

  1. 1.0 1.1 1.2 1.3 Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. 3.0 3.1 3.2 3.3 Lua error in package.lua at line 80: module 'strict' not found. Cite error: Invalid <ref> tag; name "bluebook02" defined multiple times with different content
  4. Lua error in package.lua at line 80: module 'strict' not found.