Coastal Motor Boat

From Infogalactic: the planetary knowledge core
(Redirected from Coastal Motor Boats)
Jump to: navigation, search

During the First World War, following a suggestion from three junior officers of the Harwich destroyer force that small motor boats carrying a torpedo might be capable of travelling over the protective minefields and attacking ships of the Imperial German Navy at anchor in their bases, the Admiralty gave tentative approval to the idea and, in the summer of 1915, produced a Staff Requirement requesting designs for a Coastal Motor Boat for service in the North Sea.

These boats were expected to have a high speed, making use of the lightweight and powerful petrol engines then available. The speed of the boat when fully loaded was to be at least 30 knots (56 km/h) and sufficient fuel was to be carried to give a considerable radius of action.

They were to be armed in a variety of ways, with torpedoes, depth charges or for laying mines. Secondary armament would have been provided by light machine guns, such as the Lewis gun. The weight of a fully loaded boat, complete with 18-inch (450 mm) torpedo,[note 1] was to not exceed the weight of the 30-foot (9.1 m) long motor boat then carried in the davits of a light cruiser, i.e. 4.5 tons.

The CMBs were designed by Thornycroft, who had experience in small fast boats. Engines were not proper maritime internal combustion engines (as these were in short supply) but adapted aircraft engines from firms such as Sunbeam and Napier.

40-foot Coastal Motor Boats

Class overview
Name: 40 foot CMB
Builders: Thornycroft, Tom Bunn, Taylor & Bates, J W Brooke, Frank Maynard, Salter Bros, Wills & Packham
Operators:  Royal Navy
Completed: 39 +2 not taken into service as CMB
Cancelled: 16
Preserved: 1 (CMB 4)
General characteristics
Length: 45 ft (14 m) o/a
Propulsion: Single screw, various choices of petrol engine
Complement: 2-3
Armament: Single 18" torpedo, 2-4 Lewis guns, depth charges or mines
Notes: Mahogany plank on frame construction, single-step planing round-form hull

In 1910, Thornycroft had designed and built a 25 ft (7.6 m) speedboat called Miranda IV. She was a single-step hydroplane powered by a 120 hp (89 kW) Thornycroft petrol engine and could reach 35 knots (65 km/h).[1]

A 40 ft (12 m) boat based on Miranda IV was accepted by the Admiralty for trials. A number of these boats were built and had a distinguished service history, but in hindsight they were considered to be too small to be ideal, particularly in how their payload was limited to a single 18-inch torpedo.

Several companies were approached, but only Thornycroft considered it possible to meet such a requirement. In January 1916, twelve boats were ordered, all of which were completed by August 1916. Further boats were built, to a total of 39.[2]

The restriction on weight meant the torpedo could not be fired from a torpedo tube, but instead was carried in a rear-facing trough. On firing it was pushed backwards by a cordite firing pistol and a long steel ram, entering the water tail-first. A trip-wire between the torpedo and the ram head would start the torpedo motors once pulled taut during release. The CMB would then turn hard over and get out of its path. There is no record of a CMB ever being hit by its own torpedo, but in one instance the firing pistol was triggered prematurely and the crew had a tense 20 minutes close to the enemy whilst reloading it.[3]

Service history

In December 1916, the 3rd CMB Division proceeded to Dunkirk under the command of Lieutenant W.N.T. Beckett of CMB4 and operated on the Belgian coast. On 7 April 1917, the 3rd CMB Division attacked a group of German destroyers anchored at Zeebrugge. As a result, one destroyer was sunk and one very seriously damaged. For these actions Beckett was mentioned in Despatches and was awarded the Distinguished Service Cross (DSC).[5]
In June 1919 a force of two CMBs attacked Kronstadt and sank the cruiser Oleg. Lt. Augustus Agar of CMB4 won his Victoria Cross in this operation.[3]
In August, a larger combined operation with aircraft managed to damage one battleship and sink a depot ship. There were casualties as the mission came under heavy fire.[6] Lt. Agar won a DSO to accompany his VC.[7]

In January 1919 a force of 12 CMBs was dispatched to the Caspian Sea (travelling by rail from Batumi on the Black Sea coast to Baku) to join a British naval unit supporting the anti-Bolshevik governments of Armenia, Azerbaijan and Georgia.[8]

Survivors

The hull of CMB 4 in which Augustus Agar won his VC for the attack on Kronstadt naval base in 1919 and sank the cruiser Oleg was, for many years, at the Vosper Thornycroft works on Platt’s Eyot on the Thames near Kingston. When these works closed it was restored and can now be seen at the Imperial War Museum, Duxford with details of these boats and the action. Agar’s VC is at the War Museum in London.

CMB 9 has been restored and is based at Avonmouth near Bristol. She took part in the 2014 Remembrance Day events in Bristol. CMB 9 was converted to a Distance Control Motorboat in 1918, the first CMB so converted and in so doing became DCM1. It is in her DCM outfit that the vessel currently exists.

55 foot Coastal Motor Boats

Class overview
Name: 55 foot CMB
Operators: Royal Navy
Completed: 88[9]
General characteristics
Displacement: 11 tons
Length: 60 ft (18 m) o/a
Beam: 11 ft (3.4 m)
Draught: 3 ft (0.91 m)
Propulsion:
  • 750–900 hp (560–670 kW) total power depending on engines
  • 2 shafts
Speed: 34–42 kn (63–78 km/h)
Crew: 3-5
Armament: 2 18" torpedoes or 1 18" torpedo plus 4 depth charges, 4 Lewis guns

Larger versions of the 40-footer were ordered in 1916[10]

In 1917 Thornycroft produced an enlarged 60-foot (18 m) overall version. This allowed a heavier payload, and now two torpedoes could be carried. A mixed warload of a single torpedo and four depth charges could also be carried, the depth charges released from individual cradles over the sides, rather than a stern ramp.[11]

Speeds from 35–41 knots (40–47 mph; 65–76 km/h) were possible, depending on the various petrol engines fitted. At least two unexplained losses due to fires in port are thought to have been caused by a build-up of petrol vapour igniting.[citation needed]

It was these larger boats that entered the harbour during the Kronstadt raid and torpedoed the Soviet ships.

History
Naval Ensign of the United Kingdom.svgUnited Kingdom
Name: MTB 331
Operator: Royal Navy
Builder: Thornycroft
Launched: 1941
Class overview
Name: 55 foot CMBT (1941 class)
Operators: Royal Navy
Completed: 14
Preserved: MTB 331
General characteristics
Displacement: 17 tons
Length: 60 ft (18 m)
Beam: 11.5 ft (3.5 m)
Draught: 4 ft (1.2 m)
Propulsion: Twin screws & twin 650 hp (480 kW) Thornycroft RY12 petrol engines
Speed: 40 knots (74 km/h)
Armament: Twin 18" torpedoes, depth charges or mines
Notes: Mahogany plank on frame construction, single-step planing round-form hull

The design was so successful that more were built during World War II. The last survivor, MTB 331, is of this group, built in 1941.

Survivors

MTB 331, owned by Hampshire County Council and on-loan to the British Military Powerboat Trust (BMPT) at Marchwood, is the sole surviving 55' CMB.[12] Built in 1941, the penultimate 55' built, her design was based on that of the CMBs of 1917 with two V12 engines. Her post-war history is incomplete, but she was registered as the Jonrey at Teignmouth, then later at Bristol. She was acquired by the Council, around 1990. Some restoration after this was carried out at Priddy's Hard, then she was transported by road to BMPT Marchwood in March 2000.[13]

70-foot Coastal Motor Boat

Twelve 72 ft long CMBs were ordered in early 1918 for minelaying (7 magnetic mines) or torpedo work (6 torpedoes). Five were cancelled; of the remainder, 3 survived the Second World War,[14] with CMB 103 MT preserved as a museum ship. CMB 103 was restored in August 2011 and is on display at The Historic Dockyard at Chatham.[15][16]

See also

Notes

  1. The British "18 inch" torpedoes were 17.72 inches (45.0 cm) in diameter British torpedoes pre WWII

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. 3.0 3.1 Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. "The Royal Navy on the Caspian, 1918-1919". Naval Review, 7/8 1919-20. pp87-99 and 218-240*
  9. Conway p100
  10. Conway's, p100
  11. Lua error in package.lua at line 80: module 'strict' not found.
  12. Lua error in package.lua at line 80: module 'strict' not found.[dead link]
  13. Lua error in package.lua at line 80: module 'strict' not found.[dead link]
  14. Conway's All The World's Fighting Ships 1906-1921 1985 p100
  15. Historic Warships News Sheet: December 2011
  16. http://www.nationalhistoricships.org.uk/ships_register.php?action=ship&id=434.

Further reading

  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.