London Underground code alert
Lua error in package.lua at line 80: module 'strict' not found.
A London Underground code alert is a warning issued by a London Underground Line Controller (who oversees the running of a line in conjunction with the signal operator) over the radio system giving both train and station staff information about a potential problem. The codes are rarely used as they are specifically reserved for emergency situations.
Codes
A code amber alert requires all trains to go no further than the next station as far as possible while obeying all signals.[1] The order stops the trains but permits the rapid evacuation of carriages and stations and the rerouting of passengers. A code amber alert was issued in response to both the London bombings on 7 July[2] and 21 July in 2005.[3]
A code red alert is an immediate stop order issued to all trains irrespective of their locations.[4] This could result in getting passengers out from trains stopped away from platforms or part-way down tunnels. In these cases, special procedures would be required to evacuate the carriages when considering the presence of electrified rails in the tunnels.
An Emergency Code Evacuation is issued when a specific area has to be evacuated. This code is used to evacuate a section of the line when life and safety is in direct peril.[5] This code allows abnormal movement of trains (For example: trains moving in the wrong direction to reach a station.).
See also
References
- ↑ Rule Book 7 Train incidents and safety equipment p11 - 12 STAFF ISSUED ONLY
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Rule Book 7 Train incidents and safety equipment p12 STAFF ISSUED ONLY
- ↑ Rule Book 7 Train incidents and safety equipment p13 STAFF ISSUED ONLY
<templatestyles src="Asbox/styles.css"></templatestyles>
 |
This article about the London Underground is a stub. You can help Wikipedia by expanding it. |
