Coma (optics)

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Optical aberration
Out-of-focus image of a spoke target..svg Defocus

HartmannShack 1lenslet.svg Tilt
Spherical aberration 3.svg Spherical aberration
Astigmatism.svg Astigmatism
Lens coma.svg Coma
Barrel distortion.svg Distortion
Field curvature.svg Petzval field curvature
40px Chromatic aberration

Coma of a single lens

In optics (especially telescopes), the coma, or comatic aberration, in an optical system refers to aberration inherent to certain optical designs or due to imperfection in the lens or other components that results in off-axis point sources such as stars appearing distorted, appearing to have a tail (coma) like a comet. Specifically, coma is defined as a variation in magnification over the entrance pupil. In refractive or diffractive optical systems, especially those imaging a wide spectral range, coma can be a function of wavelength, in which case it is a form of chromatic aberration.

Coma is an inherent property of telescopes using parabolic mirrors. Unlike a spherical mirror, a bundle of parallel rays parallel to the optical axis will be perfectly focused to a point (the mirror is free of spherical aberration), no matter where they strike the mirror. However, this is only true if the rays are parallel to the axis of the parabola. When the incoming rays strike the mirror at an angle, individual rays are not reflected to the same point. When looking at a point that is not perfectly aligned with the optical axis, some of the incoming light from that point will strike the mirror at an angle. This results in an image that is not in the center of the field looking wedge-shaped. The further off-axis (or the greater the angle subtended by the point with the optical axis), the worse this effect is. This causes stars to appear to have a cometary coma, hence the name.[1]

Schemes to reduce spherical aberration without introducing coma include Schmidt, Maksutov, ACF and Ritchey-Chrétien optical systems. Correction lenses for Newtonian reflectors have been designed which reduce coma in telescopes below f/6. These work by means of a dual lens system of a plano-convex and a plano-concave lens fitted into an eyepiece adaptor which superficially resembles a Barlow lens.[1][2]

Coma of a single lens or a system of lenses can be minimized (and in some cases eliminated) by choosing the curvature of the lens surfaces to match the application. Lenses in which both spherical aberration and coma are minimized at a single wavelength are called bestform or aplanatic lenses.

Vertical coma is the most common higher-order aberration in the eyes of patients with keratoconus.[3] Coma is also a common temporary symptom of corneal injuries or abrasions, in which case the visual defect gradually resolves as the cornea heals.

File:Baader Rowe Coma Corrector Comparison.jpg
This is a comparison of the coma in an uncorrected f/3.9 Newtonian telescope versus the effects of coma with the Baader Rowe Coma Corrector.

See also

References

  1. US a coma-correcting meniscus lens 4571036, Gebelein, Rolin J. & David Shafer, "Reflecting telescope with correcting lens", published 02/18/1986 
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.

External links

hu:Optikai lencsék leképzési hibái#Kóma