Copper slag

Copper slag is a by-product of copper extraction by smelting. During smelting, impurities become slag which floats on the molten metal. Slag that is quenched in water produces angular granules which are disposed of as waste or utilized as discussed below.

Characteristics

Slag from ores that are mechanically concentrated before smelting contain mostly iron oxides and silicon oxides.

Applications

Sandblasting

Copper slag is mainly used for surface blast-cleaning. Abrasive blasting is used to clean and shape the surface of metal, stone, concrete and other materials. In this process, a stream of abrasive grains called grit are propelled toward the workpiece. Copper slag is just one of many different materials that may be used as abrasive grit. Rate of grit consumption, amount of dust generated, and surface finish quality are some of the variables affected by the choice of grit material.

Internationally the described media is manufactured in compliance with ISO 11126-3

The blasting media manufactured from copper slag brings less harm to people and environment than sand. The product meets the most rigid health and ecological standards.

Construction

Copper slag can be used in concrete production as a partial replacement for sand. Copper slag is used as a building material, formed into blocks. Such use was common in areas where smelting was done, including St Helens and Cornwall in England.

See also

• Pressure washer
• Water jet cutter