Deception Pass Bridge

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Deception Pass Bridge
File:Deceptionpass bridge2.jpg
Both Canoe Pass and Deception Pass Bridges, looking east
Carries SR 20
Crosses Deception Pass, Canoe Pass
Locale Oak Harbor, Washington
Heritage status NRHP
Characteristics
Design Deck arch, cantilever
Material Steel
Total length 1487 ft
Width 28 ft
Clearance below 180 ft
History
Construction begin August 1934
Inaugurated August 1935
Statistics
Daily traffic 20,000 cars
Deception Pass Bridge
Deception pass bridge.jpg
Deception Pass Bridge, connecting Whidbey Island to Pass Island.
Location SR 20
Island and Skagit counties, Washington, USA
Nearest city Oak Harbor; Anacortes
Coordinates Lua error in package.lua at line 80: module 'strict' not found.
Built 1934-35
MPS Historic Bridges/Tunnels in Washington State TR
NRHP Reference # 82004285
Added to NRHP July 16, 1982


Deception Pass Bridge is the common name for two, two-lane bridges on Washington State Route 20 connecting Whidbey Island to Fidalgo Island in the U.S. state of Washington. It was a Washington State Highways project, and included project elements built by young workers from the Civilian Conservation Corps. Completion of the bridge was a factor in the decision to build Naval Air Station Whidbey Island and helped Oak Harbor flourish. The bridge is a commonly photographed landmark of the Puget Sound region.

History

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

In the spring of 1792, Joseph Whidbey, master of HMS Discovery and Captain Vancouver's chief navigator proved that it was not really a small bay as charted by the Spaniards (hence the name "Deception"), but a deep and turbulent channel that connects the Strait of Juan de Fuca with the Saratoga Passage, which separates the mainland from what they believed was a peninsula (actually Fidalgo Island and Whidbey Island). Thomas Coupe, a sea captain and founder of Coupeville, was the only man ever to sail a full-rigged ship through the strait discovered by Whidbey.

In the early years of the 20th century, travelers of the horse-and-buggy era used an unscheduled ferry to cross from Fidalgo Island to Whidbey Island. To call the ferry, they banged a saw with a mallet and then sat back to wait.

The bridge, one of the scenic wonders of the Pacific Northwest, is actually two spans, one over Canoe Pass to the north, and another over Deception Pass to the south. Pass Island lies between the two bridges. Construction began in August 1934, and the completed bridge was dedicated at noon on July 31, 1935. The Wallace Bridge and Structural Co. of Seattle, Washington provided 460 tons of steel for the 511-foot Canoe Pass arch and 1130 tons for the 976-foot Deception Pass span. The cost of the New Deal-era construction was $482,000, made possible through the Public Works Administration and county funds.

In 1982, the bridge was listed in the National Register of Historic Places.

It cost more to paint the spans in 1983 than to build them in 1935. They were painted again in 1997.

Bridge Facts

  • Height from water to roadway: about 180 feet, depending on the tide
  • Roadway: two 11-foot lanes, one in each direction
  • Sidewalks: 3 foot sidewalk on each side
  • Width of bridge deck: 28 feet
  • Total length: 1487 feet (more than a quarter mile)
  • Canoe Pass: one 350-ft arch and three concrete T-beam approach spans
  • Deception Pass: two 175-ft cantilever spans, one 200-ft suspended span, and four concrete T-beam approach spans
  • Vehicle crossings: 20,000 per day, average
  • Maximum speed of current in Deception Pass at flood/ebb tide: 9 kts
  • Maximum speed of current in Canoe Pass at flood/ebb tide: 10 kts
  • Suicides from jumping from the bridge total 12 in 2009 and 15 in 2010

External links