Decontamination foam

Decontamination foam (known commonly as Decon foam) is a spray-on cleaning solution that, due to its physical properties, has a longer residence time on contaminated surfaces than regular liquids and thus provides efficient decontamination of biological and chemical contaminants (e.g. chemical warfare agents, anthrax spores or other toxic industrial materials (TIM)). The composition of decontamination foams is essentially water, a surfactant, and various reactive chemicals that will react with common contaminants and form less hazardous products. Common reactants are hydrogen peroxide and quaternary ammonium complexes (QACs).

It is designed for use in emergency situations involving areas containing large numbers of possibly contaminated people e.g. at conventions, airports, concerts etc.

Benefits of Decontamination Foam

The two main benefits of decontamination foam over liquid decontaminants (chlorine, decontamination solutions, etc.) are its effectiveness on non horizontal surfaces and its high air to liquid ratio. Other decontaminants are difficult to apply to walls and ceilings due to poor adhesion, however decon foam is much better at adhering to surfaces, which increases the amount of time for the decontamination reaction to take place. Additionally, the high air to liquid ratio allows the foam to be used without over-applying the decontaminant. This high ratio also allows a small amount of liquid to cover a relatively large area in the event of a major contamination.

Soap cannons and other foam delivery systems in practice

The LAX airport soap cannon can spray large quantities of decon foam on crowds of potentially exposed persons, e.g. to decon an entire planeload of people who might be victims of a nuclear, chemical, or biological agent release.

Mixing and use

Decon foam often comes in multiple bottles, that, when mixed, combine to form the decontamination solution. The bottles should be kept separate until needed as the foam may begin to lose effectiveness after mixing. After these bottles are mixed together, the foam can be applied by spraying it on a contaminated area or by manual application.

Use for crowd control

Decon foam is also useful as an area denial weapons medium for crowd control, e.g. to make the ground slippery, as well as to reduce visibility (as a fog), such as with the CASCAD product.

Types

• SNL100 (Sandia National Laboratories)
• MDF200 (Modec Decon Foam)http://www.deconsolutions.com/pdf_Files/DF-200%20Performance%20Data%20-Live%20Agent.pdf