Easley Covered Bridge

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Easley CB
EasleyCB.jpg
The Easley Covered Bridge near Rosa, Alabama before its recent restoration.
Coordinates Lua error in package.lua at line 80: module 'strict' not found.
Easley Covered Bridge
Bridge site in U.S. state of Alabama
Easley Covered Bridge is located in Alabama
Easley Covered Bridge
Nearest city Rosa, Alabama
Coordinates Lua error in package.lua at line 80: module 'strict' not found.
Area 0.5 acres (0.2 ha)
Built 1927
Architectural style Other, One Span Town Truss
MPS Blount County Covered Bridges TR
NRHP Reference # 81000125[1]
Significant dates
Added to NRHP August 20, 1981
Designated ARLH March 3, 1976[2]
Carries single lane motor traffic
Crosses Dub Branch, Calvert Prong of the Little Warrior River
Locale Rosa, Alabama
Maintained by Blount County Commission
ID number 01-05-12 (WGCB)
Characteristics
Design Town Lattice truss
Total length 95 ft (29 m)
Width 9 ft (3 m) clearance
Load limit 3 US tons (2.72 metric tons)
Clearance above 8 ft (2 m)
History
Construction end 1927

The Easley Covered Bridge, also known as the Old Easley Covered Bridge or Rosa Covered Bridge, is a county-owned wood and metal combination style covered bridge that spans Dub Branch of the Calvert Prong of the Little Warrior River in Blount County, Alabama, United States. It is located on Easley Bridge Road off U.S. Route 231, just south of the town of Rosa, about 5 miles (8 kilometers) northwest of Oneonta. Coordinates are Lua error in package.lua at line 80: module 'strict' not found. (33.971144, -86.518719).

Built in 1927, the 95-foot (29-meter) bridge is a town lattice truss construction over a single span. Its WGCB number is 01-05-12. The Easley Covered Bridge was listed on the Alabama Register of Landmarks and Heritage on March 3, 1976. It was listed on the National Register of Historic Places on August 20, 1981. It is currently the oldest and shortest of three historic covered bridges still existing in Blount County. The bridge which had been closed in 2009 has now been restored and reopened to motor vehicle traffic on October 22, 2012. It is accessible from both sides of Easley Bridge Road. It is maintained by the Blount County Commission and the Alabama Department of Transportation.

History

The Easley Covered Bridge was built by a crew led by foreman Forrest Tidwell and his nephew Zelma C. Tidwell in 1927 over Dub Branch. Other than occasional repair work, the bridge had been in continuous use since it was constructed.

After a routine inspection, the Easley Covered Bridge was closed in 2009 due to unsafe conditions along with nearby Swann Covered Bridge. The Horton Mill Covered Bridge was already closed as a result of vandalism which occurred in 2007. Restoration of all three bridges began in late 2011. Money for these projects primarily came from the federal National Historic Covered Bridge Preservation Program as well as transportation enhancement funds. The $469,110 construction contract was awarded to Bob Smith Construction of Trussville, Alabama. The Easley Covered Bridge would be the second of the three to be restored. Wooden structural pieces were repaired or replaced as needed and new tin roofs were put on all three bridges in order to keep the weather off vital supporting timbers. Total restoration costs for the covered bridges was approximately $540,000. The difference was covered by county expenditures.

Following necessary repairs and upgrades, the Easley Covered Bridge was reopened to motor vehicle traffic on October 22, 2012.

In late 2015, cameras were installed at the three remaining covered bridges in Blount County to help deter vandalism after graffiti was found on the Easley Covered Bridge a year earlier.[3] It has since been cleaned and re-painted.

Dimensions

Main Span Length: 35.1 ft (10.7 m)

Total Span Length: 83.0 ft (25.3 m)

Deck Width: 10.8 ft (3.3 m)

Vertical Clearance: 9.0 ft (2.7 m)

Above measurements are approximate and unofficial. Total span length is not always the same as total bridge length. [4]

See also

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. ABC Channel 33/40, Cameras installed at 3 Blount County covered bridges by Alisa Long, October 5, 2015, Retrieved Jan. 30, 2016.
  4. Lua error in package.lua at line 80: module 'strict' not found.

External links