Emu Field, South Australia

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Obelisk at the Totem One test site

Emu Field is located in the desert of South Australia, at Lua error in package.lua at line 80: module 'strict' not found. (ground zero Totem 1 test).[1] Variously known as Emu Field, Emu Junction or Emu, it was the site of the Operation Totem pair of nuclear tests conducted by the British government in October 1953.

The site was surveyed by Len Beadell in 1952. A village and airstrip were constructed for the subsequent testing program.[2]

Two atomic tests were conducted at the site. Totem 1 was detonated on 15 October 1953 and Totem 2 was detonated on 27 October 1953. The devices were both sited on towers and yielded 9 kilotons and 7 kilotons respectively.[3] The site was also used in September–October 1953 for some of the Kitten series of tests, which were conventional (rather than nuclear) explosions used to evaluate neutron initiators.

It was later found that the radioactive cloud from the first detonation did not disperse as expected, and traveled north-east over the Australian continent.

The site at Emu Field was considered too remote for future use, and the search for a more convenient location led to the survey of Maralinga, where a further series of atomic tests was conducted in 1956.

There are now stone monuments at the ground-zero points, which can be visited by tourists (with the written approval of the RAAF Woomera Test Range who now control access to the area), though the location is still extremely remote (see Anne Beadell Highway). Evidence of the explosions may still be seen at ground-zero in the form of vitrified sand and concentric blast rings.

References

  1. http://www.johnstonsarchive.net/nuclear/tests/UK-ntests1.html
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Michael Carter et al. (2006). Australian Participants in British Nuclear Tests in Australia, Vol 1: Dosimetry, Commonwealth of Australia, p. 3.

External links

  • Lua error in package.lua at line 80: module 'strict' not found.