Face shield

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
A United States Navy Electrician's Mate wearing a face shield while checking for bad fuses on a lighting panel aboard the USS Carl Vinson (CVN 70)

A face shield is a device used to protect wearer's entire face (or part of it) from impact hazard such as flying objects and road debris, chemical splashes (in industry), or potentially infectious fluid (in medical).


Face shield, a protective device commonly intended to shield the wearer's face, or portions thereof, in addition to the eyes, from certain hazards, depending on faceshield type. Faceshields shall be used only in conjunction with spectacles and/or goggles.[1]


ANSI (American Standard)
  • Mark Z87: Basic impact: Faceshields shall be capable of resisting impact from a 25.4 mm (1 in) diameter steel ball dropped from a height of 127 cm (50 in).
  • Mark Z87+: High impact: Faceshields shall be capable of resisting impact from a 6.35 mm (0.25 in) diameter steel ball traveling at a velocity of 91.4 m/s (300 ft/s).
    • ref. ANSI Z87.1
EN 166 (European Standard)

These are for protection against high-speed particles, and must withstand the impact of a 6 mm nominal diameter steel ball, striking the oculars and the lateral protection at the speed stated.

  • Mark A: 190 m/s.
  • Mark B: 120 m/s.
  • Mark F: 45 m/s.
    • ref. EN166

See also welding helmet.


Provide excellent impact resistance, optical quality, heat resistance and normal chemical resistance.

Provide normal impact resistance, optical quality, heat resistance and good chemical resistance.


There are two methods to manufacture faceshields, extrusion and injection molding. Faceshields cut from extrusion sheets provide better impact resistance than injection molding faceshields because extrusion sheets are made of high molecular weight plastic pellets while injection molding must use lower molecular weight plastic pellets, which provide better melt flowing property needed by injection molding. For example, even 0.8 mm thickness faceshields made of extrusion polycarbonate sheets can withstand the impact of a 6 mm nominal diameter steel ball traveling at the speed 120 m/s (European standard, protection against high-speed particles – medium energy impact), while injection molding faceshields must have at least 1.5 mm thickness to withstand the same impact. However, injection molding can provide more complicated shape than extrusion.


In medical areas, "face shield" refers to a variety of devices used to protect a medical professional during a procedure that might expose the worker to blood or other potentially infectious fluid. An example is the use of a CPR mask while performing rescue breathing or CPR. Another example is the use of personal protective equipment to guard the face against splashing, spraying or splattering of blood or other potentially infectious materials.


In riot protection, "face shield" often means a transparent visor.


Atlantic Ocean (Jan. 27, 2006) - Chief Damage Controlman, John Brooks, removes the face shield from a Sailor’s MCU-2/P gas mask after washing it with decontamination solution during a General Quarters Drill aboard the Nimitz class aircraft carrier USS Dwight D. Eisenhower (CVN 69). Eisenhower is underway conducting carrier qualifications.

On many construction sites you will find workers using face shields to protect their eyes and face from flying debris or sparks. Many tools that involve cutting and working with metal recommend the use of a face shield. Examples would be workers that are using welding equipment or metal chop saws.

See also


  1. ANSI Z87.1-2003, page 11

External links

Media related to Face shields at Wikimedia Commons