Lugano–Ponte Tresa railway

From Infogalactic: the planetary knowledge core
(Redirected from Ferrovia Lugano-Ponte Tresa)
Jump to: navigation, search
Lugano–Ponte Tresa railway
250px
FLP train approaching Ponte Tresa
Operation
Owner Ferrovie Luganesi
Technical
Line length Lua error in Module:Convert at line 1851: attempt to index local 'en_value' (a nil value).
Track gauge Metre (3 ft 3 38 in)
Electrification 1350 V, DC Overhead
Route map
250px
File:Ferrovia Lugano-Ponte Tresa elettromotrice 3.jpg
One of the three original motor cars, still in service in 1978.
File:Limousin2003FLP01.jpg
One of the current Be4/12 sets with low floor centre car. Note the 'smile'.
File:Lugano FLP 2012.jpg
The FLP platforms at Lugano. To the left is one of the Be4/8 units kept in reserve.
File:Ponte Tresa railway station 02.jpg
Ponte Tresa station and sidings, with car park above.

The Lugano–Ponte Tresa railway or Ferrovia Lugano–Ponte Tresa (FLP) is a local railway line in the Italian speaking canton of Ticino, in south-east Switzerland. The line links the town of Lugano with Ponte Tresa, and is 12.3 kilometres (7.6 mi) long. It is built to metre gauge (3 ft 3 38 in gauge), and is electrified on the overhead system at 1350 volts DC. It is operated by the Ferrovie Luganesi company.[1][2]

The FLP opened in 1912 and is the last working line of an interconnected network including two other suburban lines, the Lugano–Tesserete railway and the Lugano–Cadro–Dino railway, and the urban tramways of Lugano. There are proposals to extend the line back into some of the areas formerly covered by this network.[3]

The FLP is a member of the Arcobaleno tariff network and operates as line S60 of the Rete celere del Canton Ticino. Trains run every 15 minutes on weekdays and every 30 minutes on weekends.[4][5]

History

The first proposal for a railway between Lugano and Ponte Tresa dates back to 1877, when a standard gauge line was proposed with the expectation it would be extended to Varese in Italy. However nothing was done until 1910, when the Ferrovie Luganesi company was founded to construct a narrow gauge electric railway between the two towns.[6]

The line opened in 1912, and had a rolling stock comprising three motor cars, three passenger trailers and six freight cars. At Lugano station, a link track connected to the adjacent Lugano–Tesserete railway, allowing transfer of rolling stock.[6][7]

In 1949 and 1964, new routings were introduced in Ponte Tresa and east of Bioggio respectively. In 1968, three new articulated electric trains were introduced, but these were transferred to the Società Subalpina Imprese Ferroviarie in 1978, when they were replaced by five new twin-car trains. In the same year a regular interval timetable, with trains every 20 minutes, was introduced. In 1979, Magliaso station was rebuilt in collaboration with the PTT.[8]

Between 1990 and 1992, Agno station and Lugano FLP station were both renovated and expanded. In 2001, a new Bioggio Molinazzo station was constructed. In 2002, five new low floor centre carriages were acquired, and used to expand the 1978 twin-car units into three car units.[9]

Between 2004 and 2007, significant upgrading work was undertaken in order to allow the introduction of 15 minute interval service. This included the doubling of the track in the Magliaso and Bioggio areas, and expanding Magliaso station and Cappella-Agnuzzo station.[9]

Operation

The line is 12.3 kilometres (7.6 mi) long and links Lugano station, also served by the Gotthard line, and Ponte Tresa station. Trains run every 15 minutes on weekdays and every 30 minutes on weekends, with a running time of 25 minutes. In normal service, trains pass in the stations of Cappella-Agnuzzo, Serocca and Magliaso. Other stations served are Sorengo, Sorengo Laghetto, Bioggio Molinazzo, Bioggio, Agno, Magliaso Paese and Caslano.[1][5]

Most services are provided by five Be4/12 sets, numbered 21-25 and made up of the 1978-built twin-car sets strengthened with a 2002-built low-floor intermediate car. The line also possesses two 1979-built Be4/8 twin-car sets, number 41-42 and purchased second hand from Ferrovie Autolinee Regionali Ticinesi, which are kept in reserve. A Tm2/2 diesel locomotive is used for works duties. Cars are painted in an orange and cream colour scheme, with a distinctive stylised smile on the front.[10]

The line is built to metre gauge (3 ft 3 38 in gauge), and is electrified on the overhead system at 1200 volts DC. The workshops are adjacent to Agno station, but trains are stabled at both termini. There is also a permanent way siding at Bioggio Molinazzo station.[1]

References

  1. 1.0 1.1 1.2 Lua error in package.lua at line 80: module 'strict' not found.
  2. This article incorporates information from the revision as of March 2, 2009 of the equivalent article on the German Wikipedia.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. 5.0 5.1 Lua error in package.lua at line 80: module 'strict' not found.
  6. 6.0 6.1 Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. 9.0 9.1 Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.

External links