Fort Hamilton Parkway (IND Culver Line)

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Fort Hamilton Parkway
NYCS-bull-trans-F.svg NYCS-bull-trans-G.svg
New York City Subway rapid transit station
300px
Station statistics
Address Fort Hamilton Parkway & Prospect Avenue
Brooklyn, NY 11218
Borough Brooklyn
Locale Windsor Terrace
Coordinates Lua error in package.lua at line 80: module 'strict' not found.
Division B (IND)
Line IND Culver Line
Services       F all times (all times)
      G all times (all times)
Transit connections Bus transport MTA Bus: B103
Structure Underground
Platforms 2 side platforms
Tracks 4 (2 in regular service)
Other information
Opened October 7, 1933; 90 years ago (1933-10-07)
Traffic
Passengers (2015) 1,792,239[1]Increase 3.6%
Rank 272
Station succession
Next north 15th Street – Prospect Park: F all times G all times
Next south Church Avenue: F all times G all times

Fort Hamilton Parkway is a local station on the IND Culver Line of the New York City Subway. It is served by the F and G trains at all times.

Station layout

G Street Level Exit/Entrance
B1 Mezzanine Fare control, station agent
B2
Platform level
Side platform, doors will open on the right
Northbound local NYCS-bull-trans-F.svg toward Jamaica – 179th Street (15th Street – Prospect Park)
NYCS-bull-trans-G.svg toward Court Square (15th Street – Prospect Park)
Southbound local NYCS-bull-trans-F.svg toward Coney Island – Stillwell Avenue (Church Avenue)
NYCS-bull-trans-G.svg toward Church Avenue (Terminus)
Side platform, doors will open on the right
B3
Express tracks
Northbound express No regular service
Southbound express No regular service

There are two local tracks and two side platforms. The unused express tracks run under the station and are not visible from the platforms. The tile band is orange-yellow with a medium red-brown border; the tablets are set in the reverse of this color scheme. Several replacement tiles in bright orange-red have been observed.

The full-time, northern entrance is by Greenwood and Prospect Avenues, with two street staircases and a block-long passageway northward to the northeast corner of Prospect Avenue and Reeve Place for one additional street staircase. There is a closed staircase that would have led to a fare control area at platform level at the Manhattan-bound side. This area is gated shut, and about half of the space is taken by station facilities with additional tiles.

The south end exit is to Fort Hamilton Parkway and has full-time HEET access and a former booth. The only exit at this end is a ramp (no staircase) that runs along the western side of the Prospect Expressway, up and down a small hill. This exit replaced the original 1933 staircase exit, when Robert Moses built the expressway. From the mezzanine area, one can see the variation in tile colors and styles when the new entrance was added in 1962, coinciding with the opening of the expressway. This can be seen when facing the ramp.

South of this station, on the express tracks on the lower level, there are bellmouths for a proposed subway line along Fort Hamilton Parkway and/or the parallel Tenth Avenue. After diverging into two lines at around 65th Street, the mainline would have terminated at 86th Street in Bay Ridge, and the other line would travel west from the mainline towards a partially-built tunnel to Staten Island. An alternate plan proposed a connection to the BMT West End Line at New Utrecht Avenue. These lines were planned as part of the IND Second System.[2][3][4][5][6][7][8][9]

The IND Culver Line's Church Avenue and Fort Hamilton Parkway stations were the last underground stations to get fluorescent lighting on platform level, which replaced the incandescent lighting in 1987.

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.

External links