Fresnel integral

File:Fresnel Integrals (Unnormalised).svg

S(x) and C(x) The maximum of C(x) is about 0.977451424. If $\frac{\pi}{2}t^2$ were used instead of $t^2$, then the image would be scaled vertically and horizontally (see below).

Fresnel integrals, S(x) and C(x), are two transcendental functions named after Augustin-Jean Fresnel that are used in optics, which are closely related to the error function (erf). They arise in the description of far field Fresnel diffraction phenomena, and are defined through the following integral representations:

$S(x)=\int_0^x \sin(t^2)\,\mathrm{d}t,\quad C(x)=\int_0^x \cos(t^2)\,\mathrm{d}t.$

The simultaneous parametric plot of S(x) and C(x) is the Euler spiral (also known as the Cornu spiral or clothoid). Recently, they have been used in the design of highways and other engineering projects.

Definition

The Fresnel integrals admit the following power series expansions that converge for all x:

File:Fresnel Integrals (Normalised).svg

Normalised Fresnel integrals, S(x) and C(x). In these curves, the argument of the trigonometric function is πt²/2, as opposed to just t² as above.

$S(x)=\int_0^x \sin(t^2)\,\mathrm{d}t=\sum_{n=0}^{\infin}(-1)^n\frac{x^{4n+3}}{(2n+1)!(4n+3)}$

$C(x)=\int_0^x \cos(t^2)\,\mathrm{d}t=\sum_{n=0}^{\infin}(-1)^n\frac{x^{4n+1}}{(2n)!(4n+1)}$

Some authors, including Abramowitz and Stegun, (eqs 7.3.1 – 7.3.2) use $\frac{\pi}{2}t^2$ for the argument of the integrals defining S(x) and C(x). To get these functions, multiply the above integrals by $\sqrt{\frac{2}{\pi}}$ and multiply the argument x by $\sqrt{\frac{\pi}{2}}$.

Euler spiral

Main article: Euler spiral

Euler spiral (x, y) = (C(t), S(t)). The spiral converges to the centre of the holes in the image as t tends to positive or negative infinity.

The Euler spiral, also known as Cornu spiral or clothoid, is the curve generated by a parametric plot of S(t) against C(t). The Cornu spiral was created by Marie Alfred Cornu as a nomogram for diffraction computations in science and engineering.

From the definitions of Fresnel integrals, the infinitesimals dx and dy are thus:

$\mathrm{d}x = C'(t)\,\mathrm{d}t = \cos(t^2)\,\mathrm{d}t \,$

$\mathrm{d}y = S'(t)\,\mathrm{d}t = \sin(t^2)\,\mathrm{d}t \,$

Thus the length of the spiral measured from the origin can be expressed as:

$L = \int_0^{t_0} {\sqrt {\mathrm{d}x^2 + \mathrm{d}y^2}} = \int_0^{t_0}{\mathrm{d}t} = t_0$

That is, the parameter t is the curve length measured from the origin (0,0) and the Euler spiral has infinite length. The vector [cos(t²), sin(t²)] also expresses the unit tangent vector along the spiral, giving θ = t². Since t is the curve length, the curvature, $\kappa$ can be expressed as:

$\kappa = \tfrac {1}{R} = \tfrac {\mathrm{d}\theta}{\mathrm{d}t} = 2t$

And the rate of change of curvature with respect to the curve length is:

$\tfrac{\mathrm{d}\kappa}{\mathrm{d}t}=\tfrac {\mathrm{d}^2\theta}{\mathrm{d}t^2} = 2$

An Euler spiral has the property that its curvature at any point is proportional to the distance along the spiral, measured from the origin. This property makes it useful as a transition curve in highway and railway engineering.

If a vehicle follows the spiral at unit speed, the parameter t in the above derivatives also represents the time. That is, a vehicle following the spiral at constant speed will have a constant rate of angular acceleration.

Sections from Euler spirals are commonly incorporated into the shape of roller-coaster loops to make what are known as "clothoid loops".

Properties

• C(x) and S(x) are odd functions of x.
• Asymptotics of the Fresnel integrals as $x \to \infty$ are given by the formulas:

$S(x)=\sqrt{\frac{\pi}{2}} \left( \frac{\mbox{sign}{(x)}}{2} - \left[1+O(x^{-4}) \right] \left( \frac{\cos{(x^{2})}}{x \sqrt{2 \pi}} + \frac{\sin{(x^{2})}}{ x^{3} \sqrt{8 \pi}} \right) \right),$

$C(x)=\sqrt{\frac{\pi}{2}} \left( \frac{\mbox{sign}{(x)}}{2} + \left[1+O(x^{-4}) \right] \left( \frac{\sin{(x^{2})}}{x \sqrt{2 \pi}} - \frac{\cos{(x^{2})}}{ x^{3} \sqrt{8 \pi}} \right) \right).$

File:Fresnel-sin.png

Complex Fresnel integral S(z)

• Using the power series expansions above, the Fresnel integrals can be extended to the domain of complex numbers, and they become analytic functions of a complex variable.
• The Fresnel integrals can be expressed using the error function as follows:

File:Fresnel-cos.png

Complex Fresnel integral C(z)

$S(z)=\sqrt{\frac{\pi}{2}} \frac{1+i}{4} \left[ \operatorname{erf}\left(\frac{1+i}{\sqrt{2}}z\right) -i \operatorname{erf}\left(\frac{1-i}{\sqrt{2}}z\right) \right],$

$C(z)=\sqrt{\frac{\pi}{2}}\frac{1-i}{4} \left[ \operatorname{erf}\left(\frac{1+i}{\sqrt{2}}z\right) + i \operatorname{erf}\left(\frac{1-i}{\sqrt{2}}z\right) \right].$

or $S(z) + i C(z) = \sqrt{\frac{\pi}{2}}\frac{1+i}{2} \operatorname{erf}\left(\frac{1+i}{\sqrt{2}}z\right)$

• C and S are entire functions.
• The integrals defining C(x) and S(x) cannot be evaluated in the closed form in terms of elementary functions, except in special cases. The limits of these functions as x goes to infinity are known:

$\int_{0}^{\infty} \cos t^2\,\mathrm{d}t = \int_{0}^{\infty} \sin t^2\,\mathrm{d}t = \frac{\sqrt{2\pi}}{4} = \sqrt{\frac{\pi}{8}}.$

Evaluation

File:Fresnel Integral Contour.svg

The sector contour used to calculate the limits of the Fresnel integrals

The limits of C and S as the argument tends to infinity can be found by the methods of complex analysis. This uses the contour integral of the function

$e^{-t^2}$

around the boundary of the sector-shaped region in the complex plane formed by the positive x-axis, the bisector of the first quadrant y = x with x ≥ 0, and a circular arc of radius R centered at the origin.

As R goes to infinity, the integral along the circular arc tends to 0, the integral along the real axis tends to the half Gaussian integral

$\int_0^\infty e^{-t^2} \mathrm{d}t = \frac{\sqrt{\pi}}{2},$

and after routine transformations, the integral along the bisector of the first quadrant can be related to the limit of the Fresnel integrals.

Generalization

The integral $\int x^m \exp(ix^n)\,\mathrm{d}x = \int\sum_{l=0}^\infty\frac{i^lx^{m+nl}}{l!}\,\mathrm{d}x = \sum_{l=0}^\infty \frac{i^l}{(m+nl+1)}\frac{x^{m+nl+1}}{l!}$

is a confluent hypergeometric function and also an incomplete Gamma function

$\int x^m \exp(ix^n)\,\mathrm{d}x =\frac{x^{m+1}}{m+1}\,_1F_1\left(\begin{array}{c}\frac{m+1}{n}\\1+\frac{m+1}{n}\end{array}\mid ix^n\right) =\frac{1}{n}i^{(m+1)/n}\gamma\left(\frac{m+1}{n},-ix^n\right),$

which reduces to Fresnel integrals if real or imaginary parts are taken:

$\int x^m\sin(x^n)\,\mathrm{d}x = \frac{x^{m+n+1}}{m+n+1} \,_1F_2\left(\begin{array}{c}\frac{1}{2}+\frac{m+1}{2n}\\ \frac{3}{2}+\frac{m+1}{2n},\frac{3}{2}\end{array}\mid -\frac{x^{2n}}{4}\right)$.

The leading term in the asymptotic expansion is

$_1F_1\left(\begin{array}{c}\frac{m+1}{n}\\1+\frac{m+1}{n}\end{array}\mid ix^n\right)\sim \frac{m+1}{n}\,\Gamma\left(\frac{m+1}{n}\right) e^{i\pi(m+1)/(2n)} x^{-m-1}$,

and therefore $\int_0^\infty x^m \exp(ix^n)\,\mathrm{d}x=\frac{1}{n}\,\Gamma\left(\frac{m+1}{n}\right)e^{i\pi(m+1)/(2n)}$.

For m=0, the imaginary part of this equation in particular is $\int_0^\infty\sin(x^a)\,\mathrm{d}x = \Gamma\left(1+\frac{1}{a}\right)\sin\left(\frac{\pi}{2a}\right)$

with the left-hand side converging for a>1 and the right-hand side being its analytical extension to the whole plane less where lie the poles of $\Gamma(a^{-1})$.

The Kummer transformation of the confluent hypergeometric function is

$\int x^m \exp(ix^n)\,\mathrm{d}x = V_{n,m}(x)e^{ix^n}$

with $V_{n,m}:=\frac{x^{m+1}}{m+1}\,_1F_1\left(\begin{array}{c}1\\1+\frac{m+1}{n}\end{array}\mid -ix^n\right)$.

Applications

The Fresnel integrals were originally used in the calculation of the electromagnetic field intensity in an environment where light bends around opaque objects. More recently, they have been used in the design of highways and railways, specifically their curvature transition zones. Another application is roller coasters. Another application is for calculating the transitions on a velodrome track to allow rapid entry to the bends and gradual exit.

See also

• Böhmer integral
• Augustin-Jean Fresnel
• Fresnel zone
• Track transition curve
• Euler spiral
• Zone plate

References

• (Uses πt²/2 instead of t².)

External links

• Faddeeva Package, free/open-source C++/C code to compute complex error functions (from which the Fresnel integrals can be obtained), with wrappers for Matlab, Python, and other languages.
• Weisstein, Eric W., "Fresnel Integrals", MathWorld.
• Weisstein, Eric W., "Cornu Spiral", MathWorld.