German submarine U-803

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
History
Nazi Germany
Name: U-803
Ordered: 7 December 1940
Builder: DeSchiMAG Seebeckwerft, Bremerhaven
Yard number: 712
Laid down: 30 June 1942
Launched: 1 April 1943
Commissioned: 7 September 1943
Fate: Sunk by a mine, 27 April 1944
General characteristics
Class & type: Type IXC/40 submarine
Displacement:
  • 1,144 t (1,126 long tons) surfaced
  • 1,257 t (1,237 long tons) submerged
Length:
Beam:
  • 6.86 m (22 ft 6 in) o/a
  • 4.44 m (14 ft 7 in) pressure hull
Height: 9.60 m (31 ft 6 in)
Draught: 4.67 m (15 ft 4 in)
Installed power:
  • 4,400 PS (3,200 kW; 4,300 bhp) (diesels)
  • 1,000 PS (740 kW; 990 shp) (electric)
Propulsion:
Speed:
  • 18.3 knots (33.9 km/h; 21.1 mph) surfaced
  • 7.3 knots (13.5 km/h; 8.4 mph) submerged
Range:
  • 13,850 nmi (25,650 km; 15,940 mi) at 10 knots (19 km/h; 12 mph) surfaced
  • 63 nmi (117 km; 72 mi) at 4 knots (7.4 km/h; 4.6 mph) submerged
Test depth: 230 m (750 ft)
Complement: 4 officers, 44 enlisted
Armament:
Service record
Part of: 4th U-boat Flotilla
Commanders:
  • Kptlt. Karl Schimpf
  • July 1943 – April 1944
Operations: None
Victories: None

German submarine U-803 was a Type IXC/40 U-boat built for Nazi Germany's Kriegsmarine during World War II at Bremerhaven.

Design

German Type IXC/40 submarines were slightly larger than the original Type IXCs. U-803 had a displacement of 1,144 tonnes (1,126 long tons) when at the surface and 1,257 tonnes (1,237 long tons) while submerged.[1] The U-boat had a total length of 76.76 m (251 ft 10 in), a pressure hull length of 58.75 m (192 ft 9 in), a beam of 6.86 m (22 ft 6 in), a height of 9.60 m (31 ft 6 in), and a draught of 4.67 m (15 ft 4 in). The submarine was powered by two MAN M 9 V 40/46 supercharged four-stroke, nine-cylinder diesel engines producing a total of 4,400 metric horsepower (3,240 kW; 4,340 shp) for use while surfaced, two Siemens-Schuckert 2 GU 345/34 double-acting electric motors producing a total of 1,000 shaft horsepower (1,010 PS; 750 kW) for use while submerged. She had two shafts and two 1.92 m (6 ft) propellers. The boat was capable of operating at depths of up to 230 metres (750 ft).[1]

The submarine had a maximum surface speed of 18.3 knots (33.9 km/h; 21.1 mph) and a maximum submerged speed of 7.3 knots (13.5 km/h; 8.4 mph).[1] When submerged, the boat could operate for 63 nautical miles (117 km; 72 mi) at 4 knots (7.4 km/h; 4.6 mph); when surfaced, she could travel 13,850 nautical miles (25,650 km; 15,940 mi) at 10 knots (19 km/h; 12 mph). U-803 was fitted with six 53.3 cm (21 in) torpedo tubes (four fitted at the bow and two at the stern), 22 torpedoes, one 10.5 cm (4.13 in) SK C/32 naval gun, 180 rounds, and a 3.7 cm (1.5 in) as well as a 2 cm (0.79 in) anti-aircraft gun. The boat had a complement of forty-eight.[1]

Service history

She was completed in September 1943 and spent the next seven months on working up cruises in the Baltic Sea near Swinemunde in order to get the crew and boat ready for operational cruising in the Battle of the Atlantic, which was at a critical stage.

As the boat worked up on 27 April 1944, just days off its intended first cruise, she struck a sea mine in the bay and sank, nine of her crew going down with the boat, and 35 being rescued by nearby ships. The boat was salvaged in August 1944, but was too badly damaged to repair, and was broken up for components for use in other U-boats. Her surviving crew were largely transferred to other units, principally U-3009, on which they surrendered in May 1945. The mine had been air-dropped over the bay by the Royal Air Force, who had realised the use that the area was being put to through photo-reconnaissance flights. The air-dropping of mines was a frequent tactic of the RAF, and achieved dividends off many German harbours.

References

  1. 1.0 1.1 1.2 1.3 Gröner 1991, p. 68.

Bibliography

  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.

External links

  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.

Lua error in package.lua at line 80: module 'strict' not found.