Glen Cove Road

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

Glen Cove Road
Lua error in Module:Infobox_road/map at line 16: attempt to index field 'wikibase' (a nil value).
Route information
Length: 11.70 mi[1][2] (18.83 km)
1.9 miles (3.06 km) as NY 107
1.95 miles (3.14 km) as NY 900B
9.55 miles (15.37 km) as CR 1
0.2 miles (0.32 km) as CR 243
Component
highways:
<templatestyles src="Plainlist/styles.css"/>
Major junctions
South end: Peninsula Boulevard in Hempstead
  <templatestyles src="Plainlist/styles.css"/>
North end: Glen Cove Avenue in Glen Cove
Location
Counties: Nassau
Highway system

Glen Cove Road is a major north–south thoroughfare through north-central Nassau County on Long Island, New York, in the United States. It is the main road leading to the communities on the east shore of Hempstead Harbor. The portion south of the North HempsteadOyster Bay town line is the unsigned County Route 1 (CR 1), while the portion north of the town line until its intersection with NY 107 is designated as New York State Route 900B (NY 900B), an unsigned reference route, New York State Route 107 (NY 107), and County Route 243 (CR 243), an unsigned county route.

The northern segment of the highway encompasses the Glen Cove Arterial Highway, a limited-access highway that was intended to connect to a proposed bridge across the Long Island Sound to Connecticut.

Route description

Glen Cove Road was once signed as Nassau County Route 1 until all county route numbers were removed in the 1970s.[3]

The alignment of Glen Cove Road starts at Peninsula Boulevard in downtown Hempstead, but is known as Clinton Road until its intersection with Old Country Road in Carle Place.[4] It curves from when it intersects with NY 25 to I-495 to steer clear of the Meadowbrook Parkway and the Northern Parkway. Within Old Westbury the road is concurrently signed as Guinea Woods Road.[4]

Soon after its intersection with NY 25A in Greenvale, it widens to a divided highway and assumes the NY 900B designation, although the reference markers refer to it as NY 904.[5] At its intersection with NY 107 the alignment assumes that route's number and name.[4] After another 1.4 miles (2.3 km) the divided highway alignment and the NY 107 designation forks to the left as Pratt Boulevard while Cedar Swamp Road forks to the right as a surface street. The road eventually ends at its intersection with Glen Cove Avenue near downtown Glen Cove.

History

Glen Cove Road was once (as of 1959) part of an extended County Route 1 which reached as far south as Point Lookout and as far north as Centre Island.[6] The current state designation for the route only includes the Clinton Road and Glen Cove Road alignment south of the North Hempstead/Oyster Bay town line, after which it becomes NY 900B and later NY 107 and CR 243. Route 900B had originally been NY 904 prior to the creation of the modern reference route system.[7] The county route signage was removed in the mid-1970s because the county did not want to pay to replace the signs to conform to new federal standards.[3]

The northernmost segment of NY 107, known as the Glen Cove Arterial Highway, clearly had limited-access aspirations.[original research?] In the mid-1960s, this segment was constructed as a bypass of Glen Street, likely as the approach for one of two proposed bridges to Rye, New York across the Long Island Sound.[citation needed]

Major intersections

The entire route is in Nassau County.

Location mi[1][2] km Destinations Notes
Village of Hempstead 0.00 0.00 Peninsula Boulevard (CR 2) Southern terminus of CR 1 and Glen Cove Road right-of-way
0.06 0.097 NY 102 (Front Street)
0.20 0.32 NY 24 (Fulton Avenue)
Garden City 1.60 2.57 Stewart Avenue (CR 177)
Carle Place 2.60 4.18 Old Country Road (CR 25) Clinton Road transitions to Glen Cove Road
3.20 5.15 Meadowbrook Parkway south – Jones Beach
3.40 5.47 Northern Parkway east – Hauppauge Exit 31 on Northern Parkway
Old Westbury 3.60 5.79 NY 25 to Northern Parkway west – Mineola, Jericho, New York
3.80 6.12 NY 25B (Hillside Avenue)
4.00 6.44 Northern Parkway west Access from Northern Parkway only; exit 30 on Northern Parkway
4.70 7.56 abbr= I.U. Willets Road to Northern State Parkway east
5.40 8.69 I-495 – New York, Riverhead Exit 39 on I-495
East Hills 6.30 10.14 Harbor Hill Road
Greenvale 7.30 11.75 NY 25A (Northern Boulevard)
7.70
0.00
12.39
0.00
Helen Street CR 1 transitions to NY 900B1
Glen Head 9.40
1.75
15.13
2.82
Glen Head Road – Glen Head 1
9.60
1.95
15.45
3.14
NY 107 south (Cedar Swamp Road) NY 900B transitions to NY 1071
10.40 16.74 Cedar Swamp Road north – Sea Cliff Right-of-way diverts to Pratt Boulevard
Glen Cove 11.50 18.51 Pulaski Street NY 107 transitions to CR 243
11.70 18.83 Glen Cove Avenue Terminus of CR 243 and Glen Cove Road right-of-way
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

Notes

  1. Upper mileage is based on the entire length of Glen Cove Road (via Google Maps),[1] while lower mileage based on NYSDOT records of NY 900B.[2]

See also

References

  1. 1.0 1.1 1.2 Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 2.2 Lua error in package.lua at line 80: module 'strict' not found.
  3. 3.0 3.1 Lua error in package.lua at line 80: module 'strict' not found.
  4. 4.0 4.1 4.2 Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.

External links

Script error: No such module "Attached KML".