HMCS Oakville (K178)

From Infogalactic: the planetary knowledge core
(Redirected from HMCS Oakville)
Jump to: navigation, search
Aerial view of HMCS Oakville taken on 7 August 1943
HMCS Oakville seen on 7 August 1943 near Yarmouth, Nova Scotia, while on passage from Saint John, New Brunswick, to Halifax, Nova Scotia, as an escort to convoy FH-70
History
Canada
Name: Oakville
Namesake: Oakville, Ontario
Operator: Royal Canadian Navy
Ordered: 1 February 1940
Builder: Port Arthur Shipbuilding Co., Port Arthur
Laid down: 21 December 1940
Launched: 21 June 1941
Commissioned: 18 November 1941
Decommissioned: 20 July 1945
Identification: Pennant number: K178
Honours and
awards:
Atlantic 1942-45[1]
Fate: Sold in 1946 to Venezuela as Patria.
Venezuela
Name: Patria
Operator: Venezuelan Navy
Acquired: purchased from Royal Canadian Navy
Commissioned: 1946
General characteristics
Class & type: Flower-class corvette[2]
Displacement: 925 long tons (940 t; 1,036 short tons)
Length: 205 ft (62.48 m)o/a
Beam: 33 ft (10.06 m)
Draught: 11.5 ft (3.51 m)
Propulsion:
  • single shaft
  • 2 × fire tube Scotch boilers
  • 1 × 4-cycle triple-expansion reciprocating steam engine
  • 2,750 ihp (2,050 kW)
Speed: 16 knots (29.6 km/h)
Range: 3,500 nautical miles (6,482 km) at 12 knots (22.2 km/h)
Complement: 85
Sensors and
processing systems:
  • 1 × SW1C or 2C radar
  • 1 × Type 123A or Type 127DV sonar
Armament:

HMCS Oakville was a Royal Canadian Navy Flower-class corvette which took part in convoy escort duties during the Second World War. She fought primarily in the Battle of the Atlantic. After the war she was sold to the Venezuelan Navy. She was named after Oakville, Ontario.

Background

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Flower-class corvettes like Oakville serving with the Royal Canadian Navy during the Second World War were different from earlier and more traditional sail-driven corvettes.[3][4][5] The "corvette" designation was created by the French as a class of small warships; the Royal Navy borrowed the term for a period but discontinued its use in 1877.[6] During the hurried preparations for war in the late 1930s, Winston Churchill reactivated the corvette class, needing a name for smaller ships used in an escort capacity, in this case based on a whaling ship design.[7] The generic name "flower" was used to designate the class of these ships, which – in the Royal Navy – were named after flowering plants.[8]

Corvettes commissioned by the Royal Canadian Navy during the Second World War were named after communities for the most part, to better represent the people who took part in building them. This idea was put forth by Admiral Percy W. Nelles. Sponsors were commonly associated with the community for which the ship was named. Royal Navy corvettes were designed as open sea escorts, while Canadian corvettes were developed for coastal auxiliary roles which was exemplified by their minesweeping gear. Eventually the Canadian corvettes would be modified to allow them to perform better on the open seas.[9]

Construction

Oakville was laid down by Port Arthur Shipbuilding Co. at Port Arthur on 21 December 1940 and was launched on 21 June 1941. She was commissioned into the RCN on 18 November 1941.

War Service

Oakville is credited with sinking U-94 on 28 August 1942 in the Caribbean Sea.[10]

Oakville was integral to the attempted capture and sinking of U-94

Attempted capture and sinking of U-94

Men of valor - They fight for you.jpg

On 28 August 1942, in the company of American warships and the corvettes Halifax and Snowberry, Oakville was escorting a convoy off Haïti when she attacked U-94. The submarine, which had been on the point of attacking the convoy, was first spotted and bombarded by an American seaplane. Oakville dropped depth charges to force it to surface, and after bombarding it, rammed the submarine twice. The submarine, struck by a depth charge on the surface, gave up the fight. A boarding party was dispatched to seize the vessel.

Eleven sailors, under the command of Sub Lieutenant Hal Lawrence and Petty Officer A.J. Powell, leapt onto the deck of the crippled U-94 and rushed toward the conning tower, which was riddled by shellfire.[11] After clearing away the dead bodies covering the hatchway, Lawrence and Powell headed below. They were then surprised by two Germans who emerged from an escape hatch. After ordering them back inside, the Canadians opened fire on the two men, who were dashing toward them.

The German crew, in a panic at the thought that the U-boat could sink at any moment, surrendered quickly.[citation needed] Despite the danger, Lawrence went searching for the Enigma machine and documents. But finding that U-94 had been scuttled, he retraced his steps, having to swim to the ladder which led to the conning tower. After giving the order to abandon ship, Lawrence leapt into the water just before the submarine went down. The Allied sailors and the 19 German survivors were recovered by Oakville and the American destroyer Lea.[12]

Post-war service

Oakville was paid off from the RCN and decommissioned on 20 July 1945. She was sold in 1946 to Venezuela as Patria. The ship's bell disappeared prior to the sale and remains missing.

References

Notes

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. Lua error in package.lua at line 80: module 'strict' not found.
  12. Lua error in package.lua at line 80: module 'strict' not found.

References

  • Lua error in package.lua at line 80: module 'strict' not found.

External links