Hedge laying

From Infogalactic: the planetary knowledge core
(Redirected from Hedgelaying)
Jump to: navigation, search
File:Hedge1.JPG
A newly laid Northamptonshire hedge in Grendon
File:Hedge3.JPG
A hedge about three years after being re-laid

Hedge laying is a country skill practised in the United Kingdom and Ireland. Creating and maintaining hedges provides

  • livestock-proof barriers;
  • rejuvenation of existing hedgerows by encouraging them to put on new growth, and thus helping to improve their overall structure and strength;
  • weather protection for crops and wildlife; and
  • aesthetically pleasing screens to fields and gardens.

Theory

The theory behind laying a hedge is easy. The practice is much harder, requiring skill and experience. The aim is to reduce the thickness of the upright stems of the hedgerow trees by cutting away the wood on one side of the stem and in line with the course of the hedge. This being done, each remaining stem is laid down towards the horizontal, along the length of the hedge.[1]

A stem which has been (or is to be) laid down in this manner is known as a "pleacher". A section of bark and some sapwood must be left connecting a pleacher to its roots in order to keep the pleacher alive—knowing how much is one part of the art of hedgelaying. The angle at which the pleach or pleacher is laid at is a factor in the "build" of a hedge - hedges are built to a height according to what purpose they are intended for. The height and condition of the trimmed stool ("stobbin" and other local names apply) is vital as this is where the strongest new growth will come from. In time the pleaches (pleachers) will die but by then a new stem should have grown, from the stool, from ground level, which replaces the laid one (pleach). This process takes from eight to fifteen years, after which, if the hedge has not been trimmed, the hedgelaying process can be repeated. Hedges can be trimmed for many years after laying before allowing the top to grow to a sufficient height to lay again.

Smaller shoots branching off the pleachers and upright stems too small to be used as pleachers are known as "brash" or "brush" and in most styles of laying the brash will be partly removed and partly woven between the pleachers to add cohesiveness to the finished hedge.

At regular intervals upright stakes are placed along the line of the hedge. These stakes give the finished hedge its final strength. A fancy effect is achieved by binding the uprights[2] with such things as hazel whips woven around the tops of the stakes. The woven whips are known as "binders" or "heatherings" and can also be of birch, ash, willow etc. In fact, these can be of any green wood which will hold the stakes and tops of the pleachers down securely. The stakes and binders used in hedgelaying when properly used provide strength and stability to the hedge. Binders are not applied simply for visual effect although in competitive hedgelaying, the appearance of the binders is often one criterion for scoring the work.

Traditionally the hedgelayer's tool was the billhook, supplemented with an axe, nowadays the chainsaw is usually used by professional hedgelayers.

Snedding

Snedding is the process of stripping the side shoots and buds from the length of a branch or shoot, usually of a tree or woody shrub, for example as part of the process of hedge laying. The verb, "to sned" is used by forest workers to refer to the process of removing branches from felled trees.[3] Whether using a bladed handtool or a chainsaw the relative difficulty of snedding is a key measure of the difficulty of the job as a whole. The word comes from the Scandinavian snäddare, meaning a smooth log.

Traditional regional styles

Over the centuries, different parts of the UK developed their own distinctive styles of hedge laying, all based on the same basic theory:

Midland style

Also known as bullock style. This hedge was designed to keep big heavy bullocks in their field. This style is mainly found in Leicestershire, Northamptonshire, Oxfordshire and Warwickshire—traditional beef rearing areas.

Typical features:

  • Stake sides face road or plough land.
  • Brush is on the animal side to stop them from eating new growth
  • Hedge slopes towards the animals, as stakes are driven in behind the line of the roots.
  • Strong binding is below the top of the hedge (so that bullocks cannot twist it off with their horns)

Derbyshire style

As the name suggests this style is from the county of Derbyshire which is a mixed farming and sheep area.

Typical features:

  • Square, sawn stakes behind the line of roots.
  • Pleachers woven firmly.
  • No binding, relies on weaving to keep pleachers in place.
  • Brush left the far side.

Double staked styles

Used in Somerset and Lancashire. Both of the following two styles are good sheep hedges; they use stakes, but as a rule neither uses any type of bindings:

Lancashire style

Typical features:

  • Uses a double row of stakes, placed alternately.
  • The most part of each pleacher lies between the two rows of stakes.
  • The twiggy bits are pulled to the outside through the stakes, helping to keep everything in place.
  • Height varies, from 3' upwards.

Westmorland style

Typical features of the Westmorland style are:

  • Single row of stakes down the centre of the hedge which, when the hedge is finished, can no longer be seen.
  • Stems go between the stakes so that alternate ones go to opposite sides of the hedge.
  • To finish, twigs at each side and on top are twisted together to produce a square shaped hedge.

Brecon style

A double brush style; this means that the twiggy ends of the pleachers are kept both sides of the hedge. Brecon style is practised in Breconshire, Radnorshire, Herefordshire and Monmouthshire.

Typical features:

  • Stakes are in the centre of the hedge.
  • A lot of stems are cut off and replaced by deadwood—this keeps animals' noses away from the new growth coming from the stumps.
  • Pleachers are double brushed and woven round every stake. This bowing covers the stumps, further protecting the new growth. It also hides the stakes.
  • The hedge is fairly tall, bound and trimmed square.

Montgomery style

Typical features:

  • A wide hedge.
  • Half crops are sometimes used on the outside.
  • Pleachers are closely woven and the tops are entwined.
  • Trimmed square.
  • No binding.

The Stake & Pleach style is used in Monmouthshire, Brecknockshire, Radnorshire, Carmarthenshire and Montgomeryshire. The Flying Hedge style (a low hedge on a bank) is used in Pembrokeshire, the Gower, Glamorganshire, Monmouthshire and Carmarthenshire.

South of England style

Derived from the rougher Sussex Bullock Fence[4] it has a double brush style, but the cut base of the pleachers can be seen. Sometimes a pleacher is laid almost flat at the base before the next few are laid at a normal angle, this is presumably to help keep the sheep at bay.

Typical features:

  • Stakes are in the centre of the hedge.
  • Bindings are used.
  • The hedge is trimmed immediately after laying.

Isle of Wight style

Now almost extinct, the Isle of Wight style looks untidy but is an effective stockproof barrier and is extremely quick and easy to lay successfully. Pleachers are simply laid one on top of the other, usually in alternating directions, with little of the brash removed, and then pegged down with crooked hazel stakes (similar to thatching spars). It is not suitable for domestic use or competitions, which has contributed to its decline, but is principally now used for restoring overgrown hedges.

Typical features:

  • Style is informal and very wide.
  • No binding, stakes at irregular intervals on alternate sides of the hedge.
  • Crooked hazel stakes can be made from rejected wands when cutting hazel for other uses.

Yorkshire style

The Yorkshire style is a sheep hedge as used on mixed arable and livestock farms. It is laid between two arable fields—and is so designed that by the time grass has replaced plough land in the rotation system, the hedge will have grown to a normal height. The base is too dense for sheep to push under it.

Typical features:

  • A very low hedge, which bushes to provide a barrier to wind. Stems lie so close it is almost impossible to see the twigs branching off.
  • Sawn stakes, rail nailed on top—because stakes and binders don't grow very plentifully on windy uplands.
  • Brush goes both sides.

Devon style

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

In Devon hedge laying is usually referred to as steeping. The pleachers are known as steepers. They are held in place by crooks (forked sticks driven into the centre of the hedgebank). The two sides of the hedge are steeped separately (as long as the hedge is big enough) leaving a gap through the centre of the hedge. When steeping is finished any eroded soil is cast up on top of the hedge to retain a good height of bank.

Typical features:

  • Steepers tight to the top of the bank.
  • Steepers secured by crooks.
  • Steepers along the crown (top of the face) of the bank.

Cornish style

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

The shrubs are laid along the top of an earth bank faced with stones. Frequently the stones are set in herringbone style. Not all Cornish hedges have shrubs on top of the bank.

West Country hedges

The style of hedge used in Devon, Cornwall and parts of Wales gives us the familiar deep Devon lanes. However in reality they are seldom particularly deep – but rather what they do have are high banks, which give the impression of depth.

The field is often on the same level as the road. The banks are sometimes faced with stone rather than turf. However these hedges are not walls which have stone all the way through, but are rather an earth bank faced with stone. These are known as Cornish hedges.

In this context, the word hedge derives from an earlier one meaning bank – i.e. the division between strips in the medieval farming system. The association comes from the time when after the 18th century enclosures each man had to dig a ditch as his boundary and pile the soil spoil on his side of the ditch. He then had to plant bushes in order to keep his animals on his own land. This 'digging down and stocking up' was very hard work and as a result when creating internal boundaries, the ditch was often left out but the result was still called a hedge.

Modern Developments

A motorway style has been developed.[5] There is interest in leaving more trees as standards within the hedge, especially good examples of threatened species such as elm and ash. There is also emerging interest in reviving older methods of using live stakes(crop and pleach style).

Hedgelaying outside the British Isles

The Netherlands

In parts of the Netherlands hedgelaying is practised, with styles distinct to that country. With all Dutch styles no stakes or bindings are used. One of every three or four standards is left tall and are laid back over the hedge. This dies off and forms a temporary way of holding the hedge in place for a year or two until it becomes re-established.[6]

Australia

The skill is re-emerging in Australia, particularly in Tasmania. Hawthorn hedges, originally planted by early settlers, are the usual target but native species may also be involved.[4]

British emigrants

Since the influx of the British settling on mainland Europe, the occasional hedgelayer has taken the skill of hedge-laying with him. Although mostly similar to the practical and swiftly worked Isle of Wight style, occasional examples of a laid hedge can be seen on the continent. However regular management is rare, and very few hedgerows are managed in a way sympathetic to the hedgelayer.

See also

External links

References

  1. National Hedge Laying Society
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. BTCV Woodlands Handbook[1]
  4. BTCV Hedging Handbook [2]
  5. BTCV Hedging Handbook [3]
  6. http://www.flickr.com/photos/dave-perry/sets/72157603336893186/ Dave Perry's photographs of a hedgelaying competition in Boxmeer, 2006