Implant failure

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

Implant failure refers to the failure of any medical implant to meet the claims of its manufacturer or the health care provider which installs it. Implant failure can have any number of causes. The rates of failure vary for different implants.

The monitoring of the safety of implants is conducted within the context of broader pharmacovigilance.

Common types of failure

Hip replacement failure

Hip replacement implants can fail. Outcomes are normally recorded in a joint replacement registry to ensure patterns are picked-up upon.

In 2013 Johnson & Johnson shared documents which indicated that 40% of a class of hip replacement implants which it manufactured had failed.[1]

Pacemaker failure

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Pacemaker failure is the inability of an implanted artificial pacemaker to perform its intended function of regulating the beating of the heart. It is defined by the requirement of repeat surgical pacemaker-related procedure after the initial implantation. Causes of pacemaker failure included: lead related failure (lead migration, lead fracture, ventricular perforation), unit malfunction (battery failure or component malfunction), problems at the insertion site (infections, tissue breakdown, battery pack migration), and failures related to exposure to high voltage electricity or high intensity microwaves.[citation needed]

Cochlear implant failure

Cochlear implants are used to treat severe to profound hearing loss by electrically stimulating the hearing nerve. Clinical symptoms of cochlear implant failure include auditory symptoms (tinnitus, buzzing, roaring, popping sounds), non-auditory symptoms (pain, shocking sensation, burning sensation, facial stimulation, itching), and decrease in the patient's hearing performance.[2] When such symptoms occur, the patient's clinical team evaluates the patient and the device using in-situ methods, and determines if revision surgery is necessary. The most commonly reported device failures are due to impacts, loss of hermeticity, and electrode lead malfunctions. Most manufacturers provide on their websites the survival rate of their marketed implants, although they are not required to do so. In order to improve and standardize failure reporting practices to the public, the AAMI is developing an American standard for cochlear implants in collaboration with the FDA, major cochlear implant manufacturers, the CALCE center for reliability, doctors, and clinicians.[3]

Dental implant failure

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Failure of a dental implant is often related to the failure of the implant to osseointegrate correctly with the bone, or vice versa.[citation needed] A dental implant is considered to be a failure if it is lost, mobile or shows peri-implant (around the implant) bone loss of greater than 1.0 mm in the first year and greater than 0.2 mm a year after.[citation needed]

Dental implant failures have been studied.[4] Persons who smoke habitually prior to having dental implants are significantly more likely to have their implants fail.[5]

Responses to implant failure

In 2012 Royal College of Surgeons of England and the British Orthopaedic Association called for increased regulation of implants to prevent implant failure.[6]

A 2011 study by Dr. Diana Zuckerman and Paul Brown of the National Research Center for Women and Families, and Dr. Steven Nissen of the Cleveland Clinic, published in the Archives of Internal Medicine, showed that most medical devices recalled in the last five years for “serious health problems or death” had been previously approved by the FDA using the less stringent, and cheaper, 510(k) process. In a few cases the devices had been deemed so low-risk that they did not need FDA regulation. Of the 113 devices recalled, 35 were for cardiovacular issues.[7] This may lead to a reevaluation of FDA procedures and better oversight.

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. https://standards.aami.org/kws/public/workgroup?wg_abbrev=CI
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.

Further reading

  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.

External links