This is a good article. Click here for more information.

Interstate 195 (Maryland)

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

Interstate 195 marker

Interstate 195
Metropolitan Boulevard
Interstate 195 highlighted in red
Route information
Auxiliary route of I-95
Maintained by MDSHA
Length: 4.71 mi[1] (7.58 km)
Existed: 1990 – present
Major junctions
West end: MD 166 in Arbutus
  <templatestyles src="Plainlist/styles.css"/>
East end: BWI Airport
Location
Counties: Baltimore, Anne Arundel
Highway system
← MD 194 MD 195 →
← MD 45 MD 46 MD 47 →

Interstate 195 (I-195) is an Interstate highway in the U.S. state of Maryland. The highway runs 4.71 miles (7.58 km) from I-95 in Arbutus east to Baltimore/Washington International Thurgood Marshall Airport (BWI Airport) in Linthicum. I-195, which is also known as Metropolitan Boulevard, is the main connection between the airport terminal and highways leading to Baltimore, Washington, and Annapolis, including I-95, MD 295, and I-97. The Interstate highway also has an interchange with MD 170, which forms part of the Airport Loop that provides access to various airport-related services. I-195 also links I-95 with Catonsville and the University of Maryland, Baltimore County (UMBC), via a westward continuation of Metropolitan Boulevard that is part of MD 166.

I-195 was constructed in three sections. The first section was a connection between MD 295 and the airport. This segment was built as Maryland Route 46 and completed in 1951 shortly after the opening of the airport, which was originally named Friendship International Airport. The second segment was completed at the opposite end of the highway in the mid-1970s, connecting U.S. Route 1 (US 1) and I-95 with MD 166 and UMBC. The first two segments were connected when the portion between MD 295 and US 1 was constructed in the late 1980s. The whole length of the highway was completed and was marked as I-195 in 1990.

Route description

I-195 eastbound at bridge over I-895

I-195 begins at the western edge of its interchange with I-95. The freeway continues west as MD 166, which has a partial interchange for UMBC Boulevard, which leads to the UMBC campus, before ending next to a park and ride facility at Rolling Road, on which MD 166 continues north toward Catonsville. The I-95 interchange is a partial cloverleaf that has flyover ramps from northbound I-95 to westbound I-195 and from southbound I-95 to eastbound I-195. I-195 heads southeast as a four-lane freeway with a speed limit of 60 miles per hour (97 km/h) across CSX's Baltimore Terminal Subdivision and meets US 1 at a four-ramp partial cloverleaf interchange. The highway crosses over I-895 (Harbor Tunnel Thruway) with no access and curves south on a viaduct to cross the Patapsco River, where the freeway passes from Baltimore County to Anne Arundel County, and the Amtrak Northeast Corridor, which also carries MARC's Penn Line. I-195 parallels the railroad south to its partial cloverleaf interchange with MD 295 (Baltimore–Washington Parkway), which contains a flyover ramp from southbound MD 295 to eastbound I-195.[1][2]

I-195 curves southeast and passes under the BWI Trail ahead of its partial cloverleaf interchange with MD 170 (Aviation Boulevard), also known as the Airport Loop. The Airport Loop provides access to long-term parking lots, the consolidated rental car facility, hotels, cargo and general aviation facilities, and the BWI Rail Station. The circumferential highway also provides indirect access to I-97 for traffic heading to Annapolis or the Chesapeake Bay Bridge. The Interstate's speed limit drops to 30 miles per hour (48 km/h) as it arrives at its eastern terminus at the entrance to BWI Airport. The eastbound roadway continues southeast into the airport proper, where it features a left exit for the hourly parking garage and then splits into two roadways for arriving and departing flights. After the two roadways—arriving flights on the lower level and departing flights on the upper level—loop between the terminal and the hourly parking garage, the roadways merge. The westbound direction of I-195 heads northwest from the airport after it issues a ramp toward long-term parking and a U-turn toward the terminal.[1][2]

Like all Interstates, I-195 is a part of the National Highway System for its entire length.[3]

History

Maryland Route 46
Location: Linthicum
Existed: 1950–1990

Friendship International Airport was constructed between 1947 and 1950 as the new primary airport for Baltimore.[4] To directly connect the airport with Baltimore, an access road was planned to link the new Baltimore–Washington Expressway, later designated MD 295, with the airport terminal. The first portion of the Friendship International Airport Access Road was completed from a full Y interchange at the expressway to an interchange with MD 170 in October 1949 and designated MD 46.[5][6][7][8] The access road was completed from MD 170 to the airport terminal in July 1951, about the same time the expressway was completed between MD 46 and downtown Baltimore.[6][7] The remainder of what is now I-195 was planned as early as 1969, when the portion of Metropolitan Boulevard north of US 1 was placed under construction.[9][10] The freeway opened from the US 1 ramps northwest through the I-95 interchange to an intersection with Sulphur Spring Road just south of the modern Selford Road overpass in August 1974.[7][11] The freeway was extended to its present terminus at Rolling Road and the ramps to UMBC Boulevard were constructed in 1975.[12][13] Metropolitan Boulevard south of the I-95 interchange was marked as a second segment of MD 46 from when it opened. North of I-95, the freeway was marked as a relocation of MD 166.[14] That segment of MD 46 was renumbered as an extension of MD 166 by 1981.[15]

The missing connection between US 1 and MD 295 resulted in a circuitous path for traffic between I-95 and BWI Airport. In 1974, that route involved exiting I-95 at MD 100, which then served as a connector between the Interstate and US 1. Traffic took US 1 south to MD 176, then took MD 176 east to MD 295 and north to the western end of MD 46.[16] Construction on the missing link, which by then was planned as part of I-195, began in 1987, when the highway's bridges over US 1 and I-895 were constructed.[17][18][19] The remainder of the highway from MD 295 to the I-895 overpass was completed, including reconstruction of the interchange with MD 295, and the intermediate section opened in June 1990.[7][20] The I-195 designation was applied to the highway's present length at the same time, and MD 166 was truncated to its present southern terminus.[20] In 2002, as part of an expansion project at the airport, several new ramps were constructed to access parking lots and facilitate an easier U-turn for motorists leaving the terminal who wish to return to the terminal.[21][22]

Exit list

County Location mi
[1]		 km Exit Destinations Notes
Baltimore Arbutus 0.00 0.00 MD 166 north (Metropolitan Boulevard) – Catonsville, UMBC Western terminus; freeway continues as MD 166
0.40 0.64 4 I-95 to I-695 – Baltimore, Washington Split into exits 4A (north) and 4B (south)
1.57 2.53 3 US 1 (Washington Boulevard) – Elkridge
Anne Arundel Linthicum 3.10 4.99 2 MD 295 (Baltimore–Washington Parkway) – Baltimore, Washington Split into exits 2A (north) and 2B (south)
4.17 6.71 1 MD 170 (Aviation Boulevard) to I-97 – Annapolis, Bay Bridge Split into exits 1A (north) and 1B (south) eastbound
4.71 7.58 BWI Airport Eastern terminus
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

See also

References

  1. ↑ 1.0 1.1 1.2 1.3 Lua error in package.lua at line 80: module 'strict' not found.
  2. ↑ 2.0 2.1 Lua error in package.lua at line 80: module 'strict' not found.
  3. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  4. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  5. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  6. ↑ 6.0 6.1 Lua error in package.lua at line 80: module 'strict' not found.
  7. ↑ 7.0 7.1 7.2 7.3 Lua error in package.lua at line 80: module 'strict' not found.
  8. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  9. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  10. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  11. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  12. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  13. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  14. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  15. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  16. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  17. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  18. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  19. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  20. ↑ 20.0 20.1 Lua error in package.lua at line 80: module 'strict' not found.
  21. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  22. ↑ Lua error in package.lua at line 80: module 'strict' not found.

External links

Script error: No such module "Attached KML".

Retrieved from "https://infogalactic.com/w/index.php?title=Interstate_195_(Maryland)&oldid=3853865"