Iodine value

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

The iodine value (or "iodine adsorption value" or "iodine number" or "iodine index") in chemistry is the mass of iodine in grams that is consumed by 100 grams of a chemical substance. Iodine numbers are often used to determine the amount of unsaturation in fatty acids. This unsaturation is in the form of double bonds, which react with iodine compounds. The higher the iodine number, the more C=C bonds are present in the fat.[1] It can be seen from the table that coconut oil is very saturated, which means it is good for making soap. On the other hand, linseed oil is highly unsaturated, which makes it a drying oil, well suited for making oil paints.

Table of iodine values

Fat Iodine number[1]
Tung oil 163 – 173
Grape seed oil 124 – 143
Palm oil 44 – 51
Olive oil 80 – 88
Coconut oil 7 – 12
Palm kernel oil 16 – 19
Cocoa butter 35 – 40
Jojoba oil 80 ~80
Poppyseed oil 133 ~133
Cottonseed oil 100 – 117
Corn oil 109 – 133
Wheat germ oil[2] 115 – 134
Sunflower oil 125 – 144
Linseed oil 136 – 178
Soybean oil 120 – 136
Peanut oil 84 – 105
Rice bran oil 95 – 108
Walnut oil[3] 120 – 140

Methodology

This particular analysis is an example of iodometry. A solution of iodine is yellow/brown in color. When this is added to a solution to be tested, however, any chemical group (usually in this test C=C double bonds) that react with iodine effectively reduce the strength, or magnitude of the colour (by taking iodine out of solution). Thus the amount of iodine required to make a solution retain the characteristic yellow/brown colour can effectively be used to determine the amount of iodine sensitive groups present in the solution.

The chemical reaction associated with this method of analysis involves formation of the diiodo alkane (R and R' symbolize alkyl or other organic groups):

\mathrm{R{-}CH{=}CH{-}R' + I_2 \longrightarrow R{-}CHI{-}CHI{-}R'}

The precursor alkene (RCH=CHR') is colourless and so is the organoiodine product (RCHI-CHIR').

In a typical procedure, the fatty acid is treated with an excess of the Hanuš or Wijs solutions, which are, respectively, solutions of iodine monobromide (IBr) and iodine monochloride (ICl) in glacial acetic acid. Unreacted iodine monobromide (or monochloride) is then allowed to react with potassium iodide, converting it to iodine, whose concentration can be determined by titration with sodium thiosulfate.[4]


Related methods of analysis

References

  1. 1.0 1.1 Lua error in package.lua at line 80: module 'strict' not found.
  2. http://online.personalcarecouncil.org/ctfa-static/online/lists/cir-pdfs/pr248.pdf
  3. http://thesoapdish.com/oil-properties-chart.htm
  4. Lua error in package.lua at line 80: module 'strict' not found.