Kanda Station (Tokyo)

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Kanda Station
神田駅
File:JR Kanda sta 003.jpg
North entrance, December 2007
Location 2-13-1 Kajichō, Chiyoda, Tokyo
（東京都千代田区鍛冶町二丁目13-1）
Japan
Operated by <templatestyles src="Plainlist/styles.css"/>
Line(s) <templatestyles src="Plainlist/styles.css"/>
Other information
Station code G13 (Tokyo Metro Ginza Line)
History
Opened 1919

Kanda Station (神田駅 Kanda-eki?) is a railway station in Chiyoda, Tokyo, Japan. East Japan Railway Company (JR East) and Tokyo Metro operate individual portions of the station.

Lines

Station layout

Kanda consists of two separate stations that form an interchange. The elevated station is operated by JR East and the underground station is operated by the Tokyo Metro. Although they are an interchange, passengers must pass through ticket barriers and pay separate fares to switch between services.

JR East station

The JR East station is the older of the two stations and opened in 1919. It is situated on an elevated viaduct and has three island platforms serving six tracks.[1] The platforms are numbered sequentially from east to west starting with platform 1. Yamanote Line trains use the inner platforms 2 and 3, Keihin-Tōhoku Line trains use platforms 1 and 4, and Chūō Line (Rapid) trains use platforms 5 and 6 as they split off from the main line north of Kanda.[1] There are an additional two tracks east of the station; these are used for Shinkansen trains running between Tokyo Station and Ueno.

There are two sets of entrances and exits (a total of four) that allow passengers to access the JR East station. The northern set, the north and east exits, offers a connection to the Ginza Line on the Tokyo Metro. The southern set, the south and west exits, has a View Plaza travel service centre. Both exits have rows of ticket machines, ticket gates, and a JR reservation office.[1]

1 ■ Keihin-Tōhoku Line for Shinagawa, Yokohama and Ōfuna
2 ■ Yamanote Line for Tokyo and Shinagawa
3 ■ Yamanote Line for Ueno and Ikebukuro
4 ■ Keihin-Tōhoku Line for Ueno, Akabane and Ōmiya
5 ■ Chūō Line (Rapid) to Tokyo
6 ■ Chūō Line (Rapid) for Ochanomizu, Shinjuku, and Takao
  • JR Kanda sta 001.jpg

    Ticket gates at the south and west exits

  • JR Kanda sta 002.jpg

    The south entrance

  • JR Kanda sta 004.jpg

    The west entrance

Tokyo Metro

The Tokyo Metro station is the newer of the two station and opened in 1931 as part of an extension of first subway line in Asia, the Ginza Line. There is a simple island platform setup with two tracks. Platform 1 is for southbound trains to Ginza and Shibuya whilst platform 2 is used for northbound trains to Ueno and Asakusa.

Access to the station is provided by a total of six entrances and exits. Exits and 1 and 2 are used as the connection to the JR East station and are on Chūō-dōri (中央通り). Exits 3 and 4 are on the same street but in the centre of the station near Kanda-Kajichō. Exits 5 and 6 are at the northernmost part of the station.

1 ○ Ginza Line for Ginza and Shibuya
2 ○ Ginza Line for Ueno and Asakusa
  • TokyoMetro Kanda sta 001.jpg

    Row of ticket machines and fare table

Adjacent stations

« Service »
Yamanote Line
Tokyo - Akihabara
Keihin-Tōhoku Line
Tokyo   Rapid   Akihabara
Tokyo   Local   Akihabara
Chūō Line (Rapid)
Chūō Liner/Ōme Liner: no stop
Tokyo   Commuter Special Rapid   Ochanomizu
Tokyo   Chūō Special Rapid   Ochanomizu
Tokyo   Ōme Special Rapid   Ochanomizu
Tokyo   Commuter Rapid   Ochanomizu
Tokyo   Rapid   Ochanomizu
Ginza Line (G-13)
Mitsukoshimae (G-12) - Suehirocho(G-14)

History

The station first opened on March 1, 1919 when the Chūō Main Line was extended from Manseibashi Station, which existed between Kanda and Ochanomizu, to Tokyo Station.[2]

The tracks of Tōhoku Main Line, now used by trains on the Keihin-Tōhoku Line and the Yamanote Line, extended from Akihabara Station to Kanda and further to Tokyo on November 1, 1925.[3] This extension completed the loop of the Yamanote Line.

The subway station opened on November 21, 1931. On this day, the subway closed the temporary terminal at Manseibashi Station and made Kanda Station the new terminus. The station became an intermediate station on April 29, 1932 when the line was extended to Mitsukoshimae Station.[4]

The extension through Kanda Station of the Tōhoku Shinkansen from its previous terminus at Ueno to Tokyo breached a pair of express tracks of the Tohoku Main Line through the station.[citation needed] These are being reinstated by the Tōhoku Jūkan Line project. The project was due to be completed in 2013 but was subsequently delayed until 2015 as a result of the 2011 Tōhoku earthquake and tsunami.[5][6][7]

From March 14, 2015 onwards, Keihin-Tōhoku rapid services began serving the station.[8]

Passenger statistics

In fiscal 2013, the JR East station was used by an average of 97,589 passengers daily (boarding passengers only), making it the fortieth-busiest station operated by JR East.[9] In fiscal 2013, the Tokyo Metro station was used by an average of 52,612 passengers per day (exiting and entering passengers), making it the seventieth-busiest station operated by Tokyo Metro.[10] The average daily passenger figures for each operator in previous years are as shown below.

Fiscal year JR East Tokyo Metro
2000 111,311[11]
2005 105,782[12]
2010 101,075[13]
2011 99,307[14] 49,410[15]
2012 97,779[16] 52,247[17]
2013 97,589[9] 52,612[10]
  • Note that JR East figures are for boarding passengers only.

See also

References

  1. ↑ 1.0 1.1 1.2 Kanda station map JR East Retrieved 19 January 2009
  2. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  3. ↑ Ishino, supra, p. 387, vol. II
  4. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  5. ↑ An Interview with the President on JR East website, retrieved 2009-05-13
  6. ↑ JR East Annual report 2007 on JR East website, retrieved 2009-05-13
  7. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  8. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  9. ↑ 9.0 9.1 Lua error in package.lua at line 80: module 'strict' not found.
  10. ↑ 10.0 10.1 Lua error in package.lua at line 80: module 'strict' not found.
  11. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  12. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  13. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  14. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  15. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  16. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  17. ↑ Lua error in package.lua at line 80: module 'strict' not found.

External links

Media related to Lua error in package.lua at line 80: module 'strict' not found. at Wikimedia Commons

Script error: The function "top" does not exist.

Script error: The function "bottom" does not exist.

Lua error in package.lua at line 80: module 'strict' not found.

Retrieved from "https://infogalactic.com/w/index.php?title=Kanda_Station_(Tokyo)&oldid=721687612"