Kel-Tec P-11
| Kel-Tec P-11 | |
|---|---|
Kel-Tec P-11
|
|
| Place of origin |  USA |
| Production history | |
| Designer | George Kelgren |
| Manufacturer | Kel-Tec CNC Industries Inc. |
| Produced | Since 1995 |
| Variants | P-40, P-357 |
| Specifications | |
| Weight | 14 oz (400 g)[1] |
| Length | 5.6 in (14 cm)[1] |
| Barrel length | 3.1 in (7.9 cm)[1] |
| Width | 1 in (2.5 cm)[1] |
| Height | 4.3 in (11 cm)[1] |
|
|
|
| Cartridge | 9×19mm |
| Action | Short Recoil, DAO |
| Feed system | 10-round magazine[1] |
The Kel-Tec P-11 is a compact, semi-automatic, short-recoil operated pistol chambered in 9 mm Luger. It has been manufactured by Kel-Tec CNC Industries of Cocoa, FL since 1995.
Contents
Design and specifications
The P-11 was designed by Swedish-born George Kellgren, the designer of many earlier Husqvarna (Sweden), Intratec, and Grendel brand firearms. The P-11 uses an aluminum receiver inside a polymer grip housing held on with polymer pins. The slide, barrel, and magazine are steel. The standard magazine holds 10 rounds, or 12 rounds in states not limited to 10-round magazines. Both fit flush to the bottom of the pistol. At 14 oz (400 g) unloaded, the handgun itself is comparatively light. The P-11 lacks an external manual safety, relying instead on a long and heavy double action only (DAO) trigger pull, which requires 9 pounds of pressure, to prevent accidental discharge. A firing pin spring and low-mass hammer prevent discharge if the gun is dropped. The P-11 will also accept some Smith & Wesson 59 series magazines.[2] An available adapter wraps around the base of 15-round Smith & Wesson model 59-style magazines. Smith & Wesson series 69 compact 12-round magazines will also work, with a matching short adapter sleeve, as well. Accessories such as trigger shoes, finger-rests, belt clips, steel guide rods to replace the factory installed polymer guide rod, gray- and OD green-colored polymer grip housings, night sights, and other accessories are also available from the manufacturer.
Variants
For a short period, the P-11 was offered in .40 S&W and .357 Sig with reduced magazine capacity. These weapons were designated P-40 and P-357. These models mated a P-11's frame to a larger slide width and barrel. Kel-Tec has suspended production of these pistols and conversion kits. In 2006, Kel-Tec introduced a single-stack pistol based on the P-11 with engineering improvements borrowed from the P-3AT. The resulting PF-9 pistol weighs about the same loaded as the P-11 empty and is somewhat slimmer.
Marketing
The P-11 is designed for concealed carry by members of the general public and law enforcement officers. It is only slightly wider than the staggered-column magazine it uses. It is particularly attractive to users who want a concealable firearm, but also desire a "full-power" defensive cartridge. The barrel is near the minimum length possible with a Browning tilting-barrel system of operation. The gun easily fits into a pocket, small holster, or inside a handbag. All edges are rounded and smoothed allowing comfort while carrying concealed. Few protrusions on the pistol can catch on a pocket holster, a deep concealment, or inside of waistband holster.
See also
References
Review: http://www.humanevents.com/2011/08/23/review-of-the-keltec-p11-a-pocketful-of-9mm/
