Klemm Kl 107

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Kl 107
300px
Klemm Kl 107 C
Role Civil utility aircraft
Manufacturer Klemm, Bölkow
First flight 1940
Number built 7 (1940s)
54 (1950s)

The Klemm Kl 107 was a two-seat light aircraft developed in Germany in 1940. It was a conventional low-wing cantilever monoplane of wooden construction with fixed tailwheel undercarriage. Wartime production totalled only five prototypes and some 20 production machines before the Klemm factory was destroyed by Allied bombing. Following World War II and the lifting of aviation restrictions on Germany, production recommenced in 1955 with a modernised version, the Kl 107B, of which Klemm built a small series before selling all rights to the design to Bölkow. This firm further revised the design and built it as the Kl 107C before using it as the basis for their own Bo 207.

Development

File:Klemm KL107B D-ECAD LEB 29.05.57 edited-2.jpg
The postwar prototype Klemm Kl 107 in 1957 after modification to Kl 107B standard

The Kl 107 was a development from earlier Klemm designs and was a single-engined two-seat low-wing monoplane with a conventional landing gear.[1] The first prototype registered D-EXKL first flew in early 1940 powered by a 105 hp Hirth HM500A-1 engine.[1] Seven prototypes were built at Boblingen in 1940 and 1941 as a private venture but only six had flown by the time the project was stopped by the war.[1]

After the war Hans Klemm Flugzeugbau joined forces with a small engineering firm Bolkow Entwicklungen as a joint-venture to further develop the Kl 107 design.[1] The new prototype, registered D-ECAD, was built at Nabern and first flew at Stuggart Airport on 4 September 1956.[1] Originally flown as a Kl 107 with a Continental C90-12F engine, it was modified as a Kl 107A and then it was re-engined in 1957 with a Lycoming O-320-A2A engine and redesignated Kl 107B.[1] It was exhibited at the 1957 Paris Air Show.

A production run of 25 aircraft were then built in 1958 and 1959.[1] In 1959 a Kl 107C variant with a modified cabin was flown and production continued of this variant until the last and 54th post-war aircraft was flown on 27 September 1961.[1] A four-seat variant was developed as the BO 207.[2]


Variants

Kl 107
Seven prototypes with Hirth HM500 engines, only six flown.[1]
Kl 107 V-8
New post-war prototype with a Continental C90-12F engine first flown in 1956.[1]
Kl 107A
The V-8 prototype modified, it was later re-engined as the Kl 107B.[1]
Kl 107B
Production variant with a Lycoming O-320-A1A engine, one prototype converted from Kl 107A and 25 production aircraft. One modified as the prototype Kl 107C and the last two completed as Kl 107Cs.[1]
Kl 107C
Variant with modified cabin with three seats, prototype first flown 3 June 1959. One prototype and 29 production aircraft (including two originally to be Kl 107Bs).[1]
Kl 107D
Original designation of a four-seat variant that became the Bolkow Bo 207.[2]

Specifications (Kl 107A)

General characteristics

  • Crew: one pilot
  • Capacity: 1 passenger
  • Length: 8.16 m (26 ft 9 in)
  • Wingspan: 10.87 m (35 ft 8 in)
  • Height: 2.06 m (6 ft 9 in)
  • Wing area: 15.7 m2 (169 ft2)
  • Empty weight: 475 kg (1,047 lb)
  • Gross weight: 625 kg (1,378 lb)
  • Powerplant: 1 × Hirth HM 60R, 61 kW (82 hp) each

Performance

  • Maximum speed: 190 km/h (118 mph)
  • Range: 670 km (418 miles)
  • Service ceiling: 5,550 m (18,200 ft)

See also

Related development

Notes

  1. 1.00 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08 1.09 1.10 1.11 1.12 Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 Lua error in package.lua at line 80: module 'strict' not found.

References

  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.