Knute hitch

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Knute hitch
Knute hitch.jpg
Category Hitch
Related Marlinespike hitch
Releasing non-jamming
Typical use Attaching a lanyard to a tool

The Knute hitch is used to attach a lanyard of small stuff to a marlingspike or other tool. Rigger Brion Toss named the hitch after his favourite marlingspike of the same name,[1] although the hitch is likely much older.[2]

Tying

The lanyard line should be just small enough to fit doubled through the lanyard hole in the tool. The end, with a figure-eight knot stopper, is placed into the protruding bight and then the bight is withdrawn, jamming in the hole. To release, pull on the end and remove it from the bight.

See also

References

  1. Toss, Brion (1992). The Rigger's Locker - Tools and Techniques for Modern and Traditional Rigging. International Marine. p. 105.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  2. Budworth, Geoffrey (1999). The Ultimate Encyclopedia of Knots & Ropework. London: Hermes House. p. 102.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>

External links