From Infogalactic: the planetary knowledge core
Jump to: navigation, search
File:Rhizocarpon geographicum on quartz.jpg
The map lichen (Rhizocarpon geographicum), the lichen most used in lichenometry.

In archaeology, palaeontology, and geomorphology, lichenometry is a geomorphic method of geochronologic dating that uses lichen growth to determine the age of exposed rock, based on a presumed specific rate of increase in radial size over time.[1][2]:9 Measuring the diameter of the largest lichen of a species on a rock surface can therefore be used to determine the length of time the rock has been exposed. Lichen can be preserved on old rock faces for up to[citation needed] 10,000 years, providing the maximum age limit of the technique, though it is most accurate (within 10% error) when applied to surfaces that have been exposed for less than 1,000 years.[3] Lichenometry is especially useful for dating surfaces less than 500 years old, as radiocarbon dating techniques are less accurate over this period.[4] The lichens most commonly used for lichenometry are those of the genera Rhizocarpon (e.g. the species Rhizocarpon geographicum) and Xanthoria.

It was first employed by Knut Fægri in 1933, though the first exclusively lichenometric paper was not published until 1950, by Austrian Roland Beschel[5] (1928-1971),[6] in a paper concerning the European Alps.[7]

Lichenometry can provide dates for glacial deposits in tundra environments, lake level changes, glacial moraines, trim lines, palaeofloods,[8] rockfalls, seismic events associated with the rockfalls,[2] talus (scree) stabilization and former extent of permafrost or very persistent snow cover.[9] It has also been explored as a tool in assessing the speed of glacier retreat due to climate change.[10]

Among the potential problems of the technique are the difficulty of correctly identifying the species, delay between exposure and colonization, varying growth rates from region to region as well as the fact that growth rates are not always constant over time, dependence of the rate of growth upon substrate texture and composition, climate, and determining which lichen is the largest.[4]


File:Xanthoria elegans 97571.jpg
Xanthoria elegans was one of the first lichens used for lichenometry.

Several methods exist for dating surfaces with help of lichenometry; the most simple relies on a single largest lichen while other methods use more. There are also differences in the way the lichen is measured; while some suggest that the largest diameter should be measured, other scientists prefer the diameter of the largest inscribed circle. A problem in dating lichens is the fact that several thalli can fuse together, making several minor lichens appears as a larger one of older age.[11] Lichenometrist Tom Bradwell has listed the following five method families as the principal ones into which most other methods can be classified:

  • Largest lichen (LL): When the single largest lichen of a species is used it means that the lichen that is oldest or grows in most favorable conditions is used to date the minimum age of the exposed surface. This was the original lichenometric from which others then developed or used as reference. Despite relying upon a single lichen this technique is praised for its simplicity and allows obtaining an image of the age of rock exposure while still in the field.[12]
  • Largest five lichens (5LL): This method is a development of the LL and was developed in the 1970s to avoid reliance on one single potentially anomalous lichen. It has been proved that neither accuracy nor precision improves significantly by having more than five lichens.[12]
  • Fixed-area largest lichen (FALL): This technique was initially specially designed for dating rockfalls and talus cones with no uniform age of deposition. The largest thallus in a unit area is measured. The sample areas are usually boulders with surfaces of about 1 m².[12]
  • Size-frequency approach (SF): The analyze of size and frequency of lichens was initially done in order to study lichen populations and preexisting thalli growing on surfaces, but has afterwards also been used as an effective absolute and relative dating method.[12]
  • Lichen cover approach (LC): This method works with the premise of that the area covered by a single species will increase over time, and by measuring the total area percentage covered by a certain lichen species the age of exposure can be inferred.[12]


  1. Holocene climatic and glacial history of the central Sierra Nevada, California, R.R. Curry, pp. 1-47, 1969, Geological Society of America Special Paper, 123, S.A. Schumm and W.C. Bradley, eds., 1969
  2. 2.0 2.1 Lichens in relation to management issues in the Sierra Nevada national parks, McCune, B., J. Grenon, and E. Martin, L. Mutch, Sierra Nevada Network, Cooperative agreement CA9088A0008. Oregon State University, Corvallis, Oregon, and Sequoia and Kings Canyon National Parks, Three Rivers, California, [1]
  3. Sowers, J.M., Noller, J.S., and Lettis, W.R., eds., 1997, Dating and Earthquakes: Review of Quaternary Geochronology and its Application to Paleoseismology. U.S. Nuclear Regulatory Commission, NUREG/CR 5562.
  4. 4.0 4.1 John L. Innes. "Lichenometry". Progress in Physical Geography. 9 (187).<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  5. Beschel R. (1950). "Flechten als Altersmasstab rezenter Moränen". Zeitschrift für Gletscherkunde und Glazialgeologie 1: 152–161.
  8. William Allen (2013)
  9. Olga Solomina, Mikhail Ivanov, Tom Bradwell. Lichenometric studies on moraines in the Polar Urals.
  10. Richard Armstrong (September 2004). "Lichens, Lichenometry, and Global Warming" (PDF). Microbiologist: 32–35.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  11. Lichen, Lichenometry and Global Warming
  12. 12.0 12.1 12.2 12.3 12.4 Bradwell, Tom 2009. Lichenometric Dating: A commentary in the light of some recent statistical studies. Geografiska Annaler.