Lincoln Premiere

Lincoln Premiere
File:1957 Lincoln Premiere (4691118352).jpg 1957 Lincoln Premiere Coupe 2-Door Hardtop
Overview
Manufacturer	Lincoln (Ford)
Production	1955–1960
Body and chassis
Class	full-size luxury car
Layout	FR layout
Chronology
Predecessor	Lincoln Capri
Successor	Lincoln Continental (1960)

The Lincoln Premiere is a luxury car that was sold by Lincoln. It was produced in both 2 and 4 door versions both seating 6 people. The Premiere was sold in the 1956 to 1960 model years, inclusive, and was positioned below the company's Continental Mark II during 1956–1957 and above the Capri from 1956–1959. The Premiere sedan was the mid-level sedan under the Mark III-V sedans, until it was replaced with the 1960 Continental sedan.

1956–1957

First generation
File:1957 Lincoln Premiere - Flickr - skinnylawyer.jpg 1957 Lincoln Premiere Convertible
Overview
Model years	1956–1957
Assembly	Mahwah, New Jersey, USA Maywood, California, USA Dearborn, Michigan, USA Wayne, Michigan USA St.Louis, Missouri, USA
Designer	Bill Schmidt
Body and chassis
Body style	2-door hardtop 2-door convertible 4-door sedan 4-door hardtop
Related	Lincoln Capri Mercury Montclair
Powertrain
Engine	368 cu in (6.0 L) Lincoln Y-block V8
Transmission	3-speed Turbo-Drive automatic
Dimensions
Wheelbase	126.0 in (3,200 mm)
Length	1956: 223.0 in (5,664 mm) 1957: 224.6 in (5,705 mm)
Width	1956: 79.9 in (2,029 mm) 1957: 80.3 in (2,040 mm)
Height	1956: 60.0 in (1,524 mm) 1957: 60.2 in (1,529 mm)
Curb weight	4,500–4,900 lb (2,000–2,200 kg)

In 1956–57 the vehicle featured a 368 cu in (6.0 L) Lincoln Y-Block V8 and it was approximately 223" (5664 mm) long in 1956. The vehicle weighed 4357 lb (1976.3 kg) and had a base price of $4,601 in 1956, which converts to roughly $40,046 in current dollars.

The Premiere's appearance borrowed from the radically different concept cars, the Mercury XM-800 and the Lincoln Futura, and the Premiere was known for its stylish exterior, high-grade interior and some unique features. For example, when equipped with optional "factory air conditioning in 1956-57," the vents were located overhead, much like those in an aircraft. The cool air was directed to the roof via a pair of clear plastic ducts visible through the rear window at each side, connecting upward from the rear package tray. Four way power seats were standard. Front suspension was independent with a stabilizer bar.

1956-1957 Lincoln Premiere

200px

1956 Lincoln Premiere Four-Door Sedan

200px

1956 Lincoln Premiere Coupe

200px

1957 Lincoln Premiere Convertible interior

1958–1960

Second generation
File:1959 Lincoln Premier 2-door hardtop.JPG 1959 Lincoln Premiere Coupe
Overview
Model years	1958–1960
Assembly	Wixom Assembly, Wixom, Michigan, USA
Designer	John Najjar
Body and chassis
Body style	2-door hardtop 4-door sedan 4-door hardtop
Related	Continental Mark series Lincoln Capri
Powertrain
Engine	430 cu in (7.0 L) MEL V8
Transmission	3-speed Turbo-Drive automatic
Dimensions
Wheelbase	131.0 in (3,327 mm)
Length	1958: 229.0 in (5,817 mm) 1959: 227.1 in (5,768 mm) 1960: 227.2 in (5,771 mm)
Width	1958–59: 80.1 in (2,035 mm) 1960: 80.3 in (2,040 mm)
Height	1958: 56.5 in (1,435 mm) 1959–60: 56.7 in (1,440 mm)
Curb weight	4,900–5,200 lb (2,200–2,400 kg)

These were the first Lincolns produced at the new Wixom plant, and were made on a unibody platform much like the Lincoln-Zephyr and the original Lincoln Continental. While advertising brochures made the case that Continental was still a separate make, the car shared its body with that year's Lincoln. The Lincoln Premiere was one trim level above the Lincoln Capri, but was one trim level package below the Continental, and differed from the higher-model Continentals in standard equipment offered and in their roof treatment, with the Continentals featuring a reverse-angle power rear "breezeway" window that retracted down behind the back seat. Lincoln lost over $60 million during 1958-1960, partly reflecting the expense of developing perhaps the largest unibody car ever made. The 1958 full-size Lincoln sold poorly in all models because of the economic recession in the U.S.

The 1958–60 Lincoln Premiere was one of the largest cars ever made, larger than contemporaneous Cadillacs, and with their canted headlights and scalloped fenders had styling considered by many to be excessive even in that decade of styling excess. The used a Unibody design. They are the longest Lincolns ever produced without federally mandated 5 mph (8.0 km/h) bumpers. The 63.1 inches (1,603 mm) front and 63.0 inches (1,600 mm) rear shoulder room they possessed set a record for Lincoln that still stands to this day. FM radio was a rare option.

The reputation for "excessive styling" is perhaps ironic given the enormous amount of styling talent that was connected with the development and modification of Lincolns of this vintage. George W. Walker, known for his contribution to the development of the original Ford Thunderbird, was Vice-President in charge of Styling at Ford during this time. Elwood Engel, famous for being lead designer of the 1961 Lincoln Continental and for his work as chief designer at Chrysler in the 1960s, was Staff Stylist (and consequently roamed all of the design studios) at Ford during this period and worked very closely with John Najjar in developing not only the 1958, but also the 1959 update. After John Najjar was relieved of his responsibilities as Chief Stylist of Lincoln in 1957 he became Engel's executive assistant, and the two worked closely together in the "stilleto studio" in developing the 1961 Lincoln Continental, which won an award for its superlative styling. After Engel left Ford in 1961, Najjar became the lead designer of the Ford Mustang I concept car, which later gave birth to the Ford Mustang. Don Delarossa, who succeeded Najjar as Chief Stylist of Lincoln, was responsible for the 1960 Continental and Premiere update, and went on to become chief designer at Chrysler in the 1980s. Alex Tremulis, who was Chief Stylist at Auburn-Cord-Duesenberg in the mid to late 1930s and famous for his work on the 1948 Tucker Sedan, was head of Ford's Advanced Styling Studio during this period, and it was his Ford La Tosca concept car, with its oval overlaid with an "X" theme, that gave birth to the "slant eyed monster" nickname to the 1958 Lincoln front end.

1957–1958 Comparison	1957 Premiere	1958 Premiere
Wheelbase	126.0 in (3,200 mm)	131.0 in (3,327 mm)
Overall Length	224.6 in (5,705 mm)	229.0 in (5,817 mm)
Width	80.3 in (2,040 mm)	80.1 in (2,035 mm)
Height	60.2 in (1,529 mm)	56.5 in (1,435 mm)
Front Headroom	35.4 in (899 mm)	35.0 in (889 mm)
Front Legroom	44.8 in (1,138 mm)	44.4 in (1,128 mm)
Front Hip Room	61.7 in (1,567 mm)	61.0 in (1,549 mm)
Front Shoulder Room	59.4 in (1,509 mm)	63.1 in (1,603 mm)
Rear Headroom	34.1 in (866 mm)	33.8 in (859 mm)
Rear Legroom–ins.	42.5 in (1,080 mm)	46.6 in (1,184 mm)
Rear Hip Room	63.8 in (1,621 mm)	65.5 in (1,664 mm)
Rear Shoulder Room	58.4 in (1,483 mm)	63.0 in (1,600 mm)