Local-express lanes

From Infogalactic: the planetary knowledge core
(Redirected from Local lane)
Jump to: navigation, search
System with four roadways / carriageways, where access ways primarily connect with the outer roadways. Through traffic on the inner carriageways can flow without interruption.
Local and express lanes can be connected using a basketweave.
'The Transfer' on Highway 401 near Toronto Pearson Airport (top of image) Lua error in package.lua at line 80: module 'strict' not found.

The local-express lane (also called collector–distributor lanes within a single interchange) system is an arrangement of roadways within a major highway where long distance traffic can use lanes with fewer interchanges compared to local traffic which use 'local' or 'collector' lanes that have access to all interchanges. Where highway ramps between express and local/collector lanes cross over another this is commonly known as braided ramps.[1][2][3][4][5][6]

Given the considerable overall width of this design, new suburban freeways are often designed with interchanges spaced far enough apart to avoid the need for parallel roadways.

Examples

Canada

United States

Other countries

North Access freeway over the National Route 9. The express (all vehicles) and local (cars and buses only) is clearly seen on this photo that shows the view towards the north, from the bridge on Melo street, at Florida, Vicente López, Buenos Aires Province, Argentina. Speed Limit Signs (Km/h) for each lane from 130, 120, 120, 110, 100 and 90 can be seen at the bridge, Also at the local, the buss preferential lane can be seen, at the right side of the yellow road line.

North Access freeway - National Route 9 from Vicente López to San Isidro at Buenos Aires, Argentina

Express and local lanes of Leningradsky Avenue in Moscow, Russia.
Express and local lanes, M-30 circular highway in Madrid, Spain, east section.

Gallery

Example of cloverleaf interchanges

A cloverleaf interchange may have collector–distributor lanes on a freeway or expressway to handle entering and exiting traffic. Usually, this lane will begin as an entrance-only ramp initially, but it will sometimes become a main lane or possibly an exit-only lane. The purpose of this lane is to facilitate traffic to the freeway exits and from the freeway entrances.

References

  1. VDOT: Braided Ramp Demo. YouTube (2009-02-26). Retrieved on 2013-07-16.
  2. I-5 196th Braided Ramp animation. YouTube (2010-12-02). Retrieved on 2013-07-16.
  3. WSDOT - Project - I-405 – NE 8th St to SR 520 Braided Ramps – Interchange Improvements - Complete May 2012. Wsdot.wa.gov. Retrieved on 2013-07-16.
  4. ftp://ftp.dot.state.tx.us/pub/txdot-info/rti/psr/5105.pdf
  5. TxDOT IH-10 Section 3. PGAL. Retrieved on 2013-07-16.
  6. State Route 180 Braided Ramps Project. Dot.ca.gov. Retrieved on 2013-07-16.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Carlson, Rich. As documented in Wikipedia:WikiProject Illinois State Routes/External correspondence#What is a Junior expressway?

External links

  • Media related to Lua error in package.lua at line 80: module 'strict' not found. at Wikimedia Commons