Locomotion No. 1

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Locomotion No. 1
Locomotion No. 1..jpg
Locomotion at Darlington Railway Centre and Museum
Type and origin
Power type Steam
Builder Robert Stephenson and Company
Build date 1825
Specifications
Configuration 0-4-0
Driver diameter 48 in (1.219 m)
Loco weight 6.5 long tons (7.3 short tons; 6.6 t)
Fuel type Coke[1]
Fuel capacity 2,200 lb or 1,000 kg or 1.00 t
Water cap 400 imp gal or 480 US gal or 1,800 L
Boiler pressure 50 psi (0.34 MPa)[2]
Heating surface 60 sq ft (5.57 m2)
Cylinders 2
Cylinder size 9.5 in × 24 in (241 mm × 610 mm)
Performance figures
Tractive effort 1,900 lbf (8.5 kN)
Career
Operators Stockton and Darlington
First run 27 September 1825
Retired 1857
Disposition static display at the
Darlington Railway Centre and Museum

Locomotion No. 1 (originally named Active) is the first steam locomotive to carry passengers on a public rail line, the Stockton and Darlington Railway. Built by George and Robert Stephenson's company Robert Stephenson and Company in 1824.

Design

The No. 1 engine, called Locomotion, for the Stockton & Darlington Railway

Locomotion used all the improvements that George Stephenson had pioneered in the Killingworth locomotives. It used high-pressure steam from a centre-flue boiler, with a steam-blast in the chimney, to drive two vertical cylinders, enclosed within the boiler. A pair of yokes above them transmitted the power downwards, through pairs of connecting rods. It made use of a loose eccentric valve gear,[3] and was the first locomotive to use coupling rods to link its the driving wheels together, rather than through a chain or gears. Because of the single flu, it had a poor heating surface compared to later steam locomotives.

This locomotive is historically important as being the first to run on a public railway,[4] rather than for the innovations in its design. It hauled the first train on the Stockton and Darlington Railway on 27 September 1825.

On 1 July 1828, the boiler exploded at Aycliffe Lane station, killing the driver John Cree.[5] With advances in design such as those incorporated into Robert Stephenson's Rocket, Locomotion became obsolete very quickly. It was rebuilt and remained in service until 1841 when it was turned into a stationary engine.

Preservation

File:Locomotion at Darlington station, 1892.jpg
Newly on display in Darlington, from a holiday sketchbook of 1892

In 1857 it was preserved. Locomotion No. 1 was on display in Alfred Kitching's workshop near Hopetown Carriage Works from 1857 to the 1880s. From 1892 to 1975 it was on display along with Derwent on one of the platforms at Darlington's main station, Bank Top. The locomotive is now on display at the Darlington Railway Centre and Museum, located in the same building as Darlington's North Road station. Locomotion is on long-term loan from the National Railway Museum and is part of the National Collection.

There is a working replica of the locomotive at Beamish Museum.[6]

See also

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.

External links

Lua error in package.lua at line 80: module 'strict' not found.