Lyell Highway

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Lyell Highway
Tasmania
Lyell Highway descending towards Queenstown
General information
Type Highway
Length 248 km (154 mi)
Route number(s) A10
(Granton - Queenstown)
B24
(Queenstown - Strahan)
Former
route number
State Route 8
(Granton - Queenstown)
Major junctions
SSE end Brooker Highway
Granton, Tasmania
  Zeehan Highway
Boyer Road
Marlborough Highway
Gordon River Road
NNW end Harvey Street
Strahan, Tasmania
Location(s)
Major settlements New Norfolk, Ouse, Queenstown
Highway system
Highways in Australia
National HighwayFreeways in Australia
Highways in Tasmania

The Lyell Highway (Route A10) is a highway in Tasmania, running from Hobart to Queenstown. It is the one of two transport routes that passes through the West Coast Range, the other being the Anthony Road (B28).

Name

The name is derived from Mount Lyell, the mountain peak where copper was found in the late 19th century; the Mount Lyell Mining and Railway Company was the predominant business in Queenstown for almost 100 years.

Hobart to Central Highlands section

Starting at Granton it winds along the southern side of the Derwent River in a generally north westerly direction to New Norfolk. This section has in the past been susceptible to flooding [1][2]

At New Norfolk it crosses the Derwent River and winds its way through hilly terrain to Hamilton. Just prior to Hamilton is the turnoff to Bothwell via a sealed route that passes Arthurs Lake and ultimately goes on to Launceston.

Central Highlands section

After Hamilton, the small town of Ouse is the only other population centre on the highway until the former Hydroelectricity town of Wayatinah.

When the highway was first constructed, it made use of existing tracks and roads in the Victoria Valley area, directly north of Ouse, leaving the Ouse and Derwent River valleys and climbing the hilly country through the towns of Osterley, Victoria Valley and Dee before rejoining the present highway near Brontë. This route closely skirts Dee Lagoon, and runs close to several other lakes, particularly Lake Echo. The now-bypassed road is narrow, and unsealed.

When the hydro-electric system was expanding and their works were under construction at Tarraleah, the highway was re-aligned to follow the Derwent River until it passed Tarraleah to provide better access to the area for construction vehicles. The Ouse-Tarraleah section was opened to traffic in August 1940 even though construction work hadn't finished. After Tarraleah the road climbs steeply out of the Nive River gorge until it re-joins the original route near Brontë.

At Brontë the Marlborough Highway (B11) turns off the main road and leads to the Great Lake, where it joins the Lakes Highway and eventually runs to Deloraine.

A common short-cut is the '14-Mile Road' (C601), a gravel road which cuts across the Nive Plains just after Tarraleah, by-passing the steep Tarraleah Gorge section, re-joining the highway several kilometres past Brontë. It is not a safe alternative as it is a narrow, unsealed road, and can be frequented by log-trucks.

In wintry conditions the whole of the Central Highlands section is susceptible to black ice, and it can be exceptionally bad in the heavily forested section west of Ouse, but it can be encountered all the way to the west coast. Snow is usually encountered in the Derwent Bridge area during most winters and may force closure of the road occasionally for several days.[3] This applies to both the newer Tarraleah section and the older Osterley-Lake Echo-Dee section.

As the highway enters Derwent Bridge it strikes a midpoint between Lake St Clair to the north, and Lake King William to the south.

West Coast section

This section is usually known as that west of Derwent Bridge or Mount King William.[4]

It runs through the Franklin-Gordon Wild Rivers National Park, and through the West Coast Range before reaching Queenstown. There has also been a state reserve along the highway [5]

The highway did not reach Queenstown until the 1930s and was not properly surfaced for some time after that. In post cards of the 1940s and 1950s it is called the West Coast Road.

Due to its altitude, the section of the highway over the plateau between Derwent Bridge and Mount King William is often closed during winter due to ice and snow.[6] It can also be affected by rockfalls [7]

With the damming of the King River and the creation of Lake Burbury, the highway was re-routed to a narrow point where the Bradshaw bridge could be constructed across the lake.

See also

<templatestyles src="Stack/styles.css"/>

Notes

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.

References

  • Lua error in package.lua at line 80: module 'strict' not found.
  • Whitham, Charles. Western Tasmania: A Land of Riches and Beauty.

External links